Table of Contents
Advertisement
BL14536RBH
BL14592RBH
BL16536RBHK
BL16592BHK
CRDH135-92
CRDH145-36
CRDH155-42
CRDH165-107
CRDH180-42
CRDH180-107
MI145HCRD
M180HCRD
MBA16H107BR
MC135TH92RB
Instruction manual
Please read these instructions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d'instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes
de usar esta maquina.
P145H107RB
P18H107RB
RE145H92RB
RE155H107RB
REB145HRB
REN145HRB
REN145THRB
REQ145HRB
WZ145H92RB
WZ155H107RB
WZ18H107RB
135H92RB
165H107RB
02227_PL_LT_CRD
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
machine gebruikt.
Advertisement
Table of Contents
Related Manuals for Electrolux P145H107RB
Summarization of Contents
Safety Rules
Training
Read instructions carefully, familiarize with controls and proper use of equipment.
Preparation
Inspect area, remove objects, wear protective footwear and long trousers.
Operation
Do not operate in confined spaces, mow in daylight, disengage blade clutches, use care on slopes.
Assembly
STEERING WHEEL
Mount extension shaft, cover, adapter, and steering wheel securely.
Battery Cover
Install battery
Connect battery terminals, ensure proper connection and secure the cover.
Gauge Wheels
TO ADJUST GAUGE WHEELS (if equipped)
Adjust gauge wheels to be slightly off the ground for proper deck positioning.
Bagger Components to tractor
To install bagger components to tractor
Install support brackets and bagger support tube using provided hardware.
Bagger Adjustment
Bagger adjustment
Adjust bagger assembly horizontally and vertically for proper function and fit.
Mulcher Plug
To assemble and install mulcher plug (if equipped)
Assemble and install the mulcher plug, ensuring proper alignment and securing.
Functional description.
Positioning of controls
Identify and understand the function of all controls on the machine.
Controls
Light switch position (if equipped)
Operate the light switch to turn headlights on or off.
Throttle control
Regulates engine revs and blade rotation speed.
Controls
Brake and clutch pedal
Apply brake and disengage motor by pressing the pedal.
Controls
Motion control lever
Control lever for forward, neutral, reverse, and speed.
Controls
Connection/disconnection of the cutting unit
Engage or disengage the cutting unit drive.
Quick lifting/lowering of the cutting unit
Adjust cutting unit height quickly for terrain or transport.
Controls
Ignition Lock
Control engine start, run, and stop.
Controls
Parking brake
Engage parking brake to secure the tractor.
Free-wheel Control Lever
Engage or disengage freewheel for towing or moving.
Controls
Choke control
Control choke for cold engine starting.
Before starting.
Filling up
Refuel with unleaded petrol outdoors, do not smoke, check cap.
Before starting.
Oil level
Check engine oil level and add correct type if needed.
Before starting.
Tire air pressure
Check and maintain correct tire pressure for optimal performance.
Driving.
Starting of motor
Ensure cutting unit is disengaged and in transport position before starting.
Driving.
IMPORTANT! COLD STARTING FOR HYDRO
Warm up transmission for one minute in neutral before driving.
PURGE TRANSMISSION
Bleed transmission to remove trapped air before first use or after service.
Driving.
Cutting tips
Clear lawn, avoid slopes, mow often, avoid wet grass.
Driving.
Pour vider le bac:
Turn off alarm, position tractor, set brake, raise and pull handle to empty bagger.
Driving.
To convert mower
Convert mower for mulching, rear discharge, or bagging.
Driving.
Switching off the engine
Disengage cutting unit, lift deck, turn key to OFF, idle engine before shutting off.
WARNING!
Never leave the ignition key in the machine unattended.
Maintenance, adjustment.
WARNING!
Disconnect spark plug wire before any service.
Maintenance, adjustment.
Engine hood
Raise, disconnect headlight wire, remove and reinstall hood.
Maintenance, adjustment.
Maintenance
Perform periodic maintenance to keep tractor in good running condition.
Maintenance, adjustment.
To service engine
Refer to engine manual for service procedures.
Blades
Blades
Keep blades sharp, replace bent/damaged blades, ensure equal sharpening.
Blade Care
Install blades correctly on the correct side to avoid imbalance.
Dismantling of the cutting unit
Dismantling of the cutting unit
Remove belt, retainer springs, and axles from the cutting unit.
Assembly of the cutting unit
Assembly of the cutting unit
Install the cutting unit under the machine in reverse order of dismantling.
Replacement of drive belt for cutting unit
Replacement of drive belt for cutting unit
Dismantle cutting unit, remove belt, and mount new belt in reverse order.
Adjustment of the cutting unit
SIDE-TO-SIDE ADJUSTMENT
Adjust cutting unit side-to-side to ensure equal ground clearance.
TRANSAXLE MOTION CONTROL LEVER ADJUSTMENT
TRANSAXLE MOTION CONTROL LEVER ADJUSTMENT
Adjust motion control lever for proper neutral position and tractor creep.
TRANSAXLE COOLING
TRANSAXLE COOLING
Keep fan and cooling fins clean for proper cooling.
TRANSAXLE PUMP FLUID
Transaxle is sealed, no fluid maintenance required.
Troubleshooting.
Engine will not start
Check fuel, plug, connections, carburetor, fuel pipe.
Start motor will not turn engine
Check battery, contacts, lever position, fuse, ignition lock, safety contacts.
Engine runs unevenly
Check gear, plug, carburetor, air filter, fuel vent, ignition, fuel pipe.
Engine feels weak
Check air filter, plug, carburetor, fuel pipe.
Engine overheats
Check for overload, blocked inlets, damaged fan, oil level, ignition, plug.
Battery does not charge
Check fuse, cells, battery contacts.
Lighting does not function
Check bulbs, switch, cable for short-circuits.
The machine vibrates
Check for loose blades, engine, or blade imbalance.
Uneven cutting results
Check for blunt blades, skewed deck, grass condition, tire pressure.
Storage.
The following steps should be taken when mowing season is over:
Clean machine, touch up paint, change oil, drain fuel, remove battery, store indoors.
Service
Provide purchase date, model, type, and serial number for parts and service.
Need help?
Do you have a question about the P145H107RB and is the answer not in the manual?
Questions and answers