Related Manuals for Samsung AG010KSVAFH
Summarization of Contents
Safety Information
General Safety Warnings
Covers general warnings, cautions, and safety precautions for operation.
Proposition 65 Warning
Specific safety warning regarding cancer and reproductive harm.
Preparing for Installation
Specifications
Detailed technical specifications for the DVM CHILLER models.
Product Handling and Classification
Guidelines for moving the unit and its classification.
Installation Location Selection
Criteria for choosing the optimal installation location for the unit.
Required Space for Installation
Installation Space Requirements
Clearance requirements for single and multi-unit installations.
Base Construction and Installation
Base Construction and Mounting
Guidelines for base construction, mounting, and anchoring the unit.
Installation Precautions and Ducting
Precautions during installation and guidance for installing discharge and wind/snow ducts.
Installing Wind/Snow Prevention Duct
Discharge Duct Installation Guidance
Advice for installing discharge ducts around obstacles, in cold, and windy regions.
Water Pipe Installation
Water Pipe Diagram and Precautions
Schematic of the water piping system and key installation precautions.
Water System Maintenance and Protection
Guidance on strainer, water amount, drainage, and freeze protection.
Water Quality and Storage
Standards for water quality and ensuring adequate water storage.
Electrical Wiring Work
Power Cable and Breaker Specifications
Details on selecting and specifying circuit breakers and power cables.
Cable Configuration and Connection
Guidelines for routing, configuring, and connecting power and communication cables.
Terminal Wiring and Grounding
Instructions for terminal wiring, solderless terminals, and grounding procedures.
Setting Key Functions
Hydro Controller Option Settings
Guide to configuring various options for the hydro controller.
MICOM and Inverter Controller Settings
Setting options for MICOM and inverter controllers, including version display.
Tact Switch and Function Settings
Procedure for setting unit options using tact switches and functions.
Check Points After Installation
Pre-Operation Installation Checks
Checklist for verifying installation quality, wiring, and water pipes.
Trial Operation Procedures
Precautions, checks, and steps for performing trial operation on the unit.
Maintenance
Component Identification
Diagrams identifying key components of the DVM CHILLER.
Water Pipe Maintenance
Procedures and guidelines for maintaining the water piping system.
Water Quality and Freeze Prevention
Standards for water quality and methods for preventing freezing.
Heat Exchanger and Unit Shutdown
Procedures for maintaining the heat exchanger and shutting down the unit.
Error Display and Vacuuming
Error Display Codes and History
List of error codes and how to view the error history.
Air Tightness Test and Vacuuming
Procedure for testing air tightness and vacuuming the system.
Troubleshooting
Common Operational Issues
Common operational problems and their likely causes and solutions.
Troubleshooting Guide
A table listing problems, their causes, and recommended solutions.
Periodic Maintenance
Common Component Maintenance
Checklists and standards for periodic maintenance of common components.
Water System and Unit Maintenance
Procedures for maintaining the water system, exterior, and moving the unit.
Quick Smart Features
Automatic and Hot Water Functions
Description of automatic functions and the hot water/cool storage mode.
Quiet, Demand, and Fan/Pump Functions
Features for noise reduction, power limiting, and fan/pump operation.
Need help?
Do you have a question about the AG010KSVAFH and is the answer not in the manual?
Questions and answers