Advertisement
Quick Links
TG2800
TG3800
TG6500
TG8000
TG10000
GASOLINE ENGINE GENERATOR 4T
GENERADOR A GASOLINA 4T
GERADOR À GASOLINA 4T
OWNER'S MANUAL
PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS INFORMATION FOR YOUR SAFETY.
POR FAVOR, LEA ATENTAMENTE ESTE MANUAL. CONTIENE INFORMACIÓN PARA SU SEGURIDAD.
GUÍA DEL PROPIETARIO • MANUAL DO PROPRIETÁRIO
POR FAVOR, LEIA ATENTAMENTE ESTE MANUAL. ELE CONTÉM INFORMAÇÕES PARA SUA SEGURANÇA.
Advertisement
Related Manuals for Toyama TG10000
Summarization of Contents
Safety Symbols
Understanding Safety Symbols
Explains various safety symbols and their meanings for user guidance.
Operating Precautions - Part 1
General Operating Guidelines
Provides essential guidelines for safe and proper generator operation.
Operating Precautions - Part 2
Safety and Handling Instructions
Covers electrical safety, manual accessibility, and user restrictions.
Operating Precautions - Part 3
Product Modification and Load Limits
Details on avoiding product modification and respecting load limits.
Pre-Operation Inspection - Part 1
Essential Checks Before Starting
Checks for fuel level, oil level, leaks, and air filter condition.
Pre-Operation Inspection - Part 2
Malfunction and Component Fit Checks
Verifies for signs of malfunction and correct fit of components and fasteners.
Grounding Procedure
Proper Grounding Steps
Instructions for connecting the generator to a proper ground.
Wheel Installation
Attaching Wheels and Shaft
Guides on how to attach the wheels and secure the shaft.
Handle Support Installation
Mounting the Handle Support
Steps for aligning and securing the handle support.
Damping Bracket Installation
Securing the Damping Bracket
Instructions for aligning and tightening the damping bracket.
Checking Oil Level - Part 1
Initial Oil Level Check Steps
Covers placing the equipment on a level surface and checking the dipstick.
Checking Oil Level - Part 2
Completing Oil Level Check
Addresses topping up oil and reinstalling the dipstick.
Fueling the Generator
Safe Fueling Procedure
Steps for safely filling the fuel tank with correct fuel.
Manual Starting Procedure - Part 1
Initial Steps for Manual Start
Covers disconnecting loads, setting fuel register, and choke operation.
Manual Starting Procedure - Part 2
Executing the Manual Start
Details on setting the switch, pulling the starter, and returning the handle.
Electric Starter Battery Connection
Connecting Battery Terminals
Instructions for connecting positive and negative battery terminals.
Electric Starting Procedure - Part 1
Initial Steps for Electric Start
Covers disconnecting loads, setting fuel register, and choke operation.
Electric Starting Procedure - Part 2
Executing the Electric Start
Details on throttle, key turn, and retrying if engine doesn't start.
Connecting Loads
Connecting Appliances to Generator
Steps for safely connecting devices, including power management.
Disconnecting Loads
Safely Disconnecting Appliances
Procedures for turning off loads and cooling the engine.
Stopping Engine (Manual Start)
Manual Engine Shutdown Procedure
Steps for disconnecting loads, idling, and shutting off the engine.
Stopping Engine (Electric Start)
Electric Engine Shutdown Procedure
Steps for disconnecting loads, idling, and shutting off the engine.
Engine Oil Replacement - Part 1
Draining Engine Oil
Steps to drain the old engine oil.
Engine Oil Replacement - Part 2
Refilling Engine Oil
Instructions for filling the engine with new oil.
Spark Plug Cleaning - Part 1
Preparing for Spark Plug Cleaning
Steps to cool the engine, disconnect protection, and remove dirt.
Spark Plug Cleaning - Part 2
Spark Plug Cleaning and Reinstallation
Covers checking gap, manual reinstallation, and final tightening.
Spark Plug Replacement - Part 1
Preparing for Spark Plug Replacement
Steps to cool the engine, disconnect protection, and remove dirt.
Spark Plug Replacement - Part 2
Spark Plug Replacement and Reinstallation
Covers checking gap, manual reinstallation, and final tightening.
Carburetor Cup Cleaning
Carburetor Cup Cleaning Procedure
Steps for removing, cleaning, drying, and reinstalling the carburetor cup.
Air Filter Maintenance
Air Filter Cleaning and Replacement
Instructions for cleaning or replacing the air filter element.
Fuel Tank Strainer Cleaning
Fuel Strainer Cleaning Procedure
Steps for removing, cleaning, and reinstalling the fuel strainer.
Removing Fuel from Tank
Fuel Draining Procedure
Instructions for safely draining fuel from the tank.
Storage Instructions - Part 1
Preparing for Long-Term Storage
Steps for preparing the engine for storage, including fuel and oil.
Storage Instructions - Part 2
Finalizing Storage Procedures
Covers distributing oil, cleaning, and storing the engine.
Transporting the Generator
Safe Transport Guidelines
Procedures for cooling, securing fuel, and positioning for transport.
Need help?
Do you have a question about the TG10000 and is the answer not in the manual?
Questions and answers