Related Manuals for Acer A1P1701 Series
Summarization of Contents
Information for Your Safety and Comfort
Turning the product off before cleaning
Instructions for safely powering off the projector before cleaning procedures.
Caution for plug as disconnecting device
Guidelines for safely connecting and disconnecting the external power supply unit.
Caution for Accessibility
Ensures the power outlet is easily accessible for safe equipment operation and disconnection.
Product servicing
Additional safety information
Provides further safety guidelines for projector usage, including lens safety and environmental concerns.
Caution for Listening
Disposal instructions
Guidelines for environmentally responsible disposal of the electronic device, recommending recycling.
Mercury advisory
Information regarding mercury content in lamps and proper disposal procedures for compliance.
First Thing First
Usage Notes
Key operational guidelines and best practices for using the projector effectively.
Precautions
Important warnings, precautions, and maintenance recommendations to maximize projector lifespan.
Introduction
Product Features
Detailed description of the projector's outstanding features and capabilities.
Projector Overview
Projector Outlook
Visual identification of projector parts and connectors from front/upper and rear views.
Getting Started
Connecting the Projector
Instructions and diagrams for connecting various devices and cables to the projector.
Turning the Projector On/Off
Turning On the Projector
Step-by-step guide to powering on the projector and connecting signal sources.
Turning Off the Projector
Instructions for safely powering off the projector and understanding its shutdown process.
Adjusting the Projected Image
Adjusting the Height of the Projected Image
Using tilt adjusting wheels to raise or lower the projector for desired image height and angle.
User Controls
Installation Menu
OSD menu for projector installation and maintenance, activated when no signal is detected.
Color
BluelightShield
Feature to protect eyes from blue light by adjusting its level, with multiple options.
LumiSense
Intelligent feature optimizing brightness and color saturation for enhanced image detail.
Display Mode
Selection of factory presets optimized for different types of images and environments.
Color Profile
Customizable color settings available when specific display modes are selected.
Wall Color
Adjusts color compensation based on wall color to achieve accurate image tone.
Brightness
Adjusts the overall brightness level of the projected image.
Contrast
Controls the difference between the lightest and darkest parts of the picture.
Saturation
Adjusts the intensity of colors in the video image, from black and white to fully saturated.
Tint
Adjusts the color balance between red and green for accurate color representation.
Color Temperature
Adjusts the screen's color appearance, making it look colder or warmer.
Gamma
Affects the representation of dark scenery, making it brighter with higher values.
Advanced
Advanced image settings for color management, noise reduction, and special modes.
Rename
Allows renaming of User 1/User 2/User 3 display modes in English letters.
Image
Projection Mode
Sets the image orientation for front or rear projection onto a screen.
Projection Location
Automatically adjusts or manually sets the projection position (Desktop/Ceiling).
Aspect Ratio
Selects and scales the image aspect ratio to match the screen display requirements.
Auto Keystone
Automatically corrects image distortion caused by tilting the projector.
Manual Keystone
Manually corrects image distortion caused by tilting the projector.
Sharpness
Adjusts the clarity and definition of the projected image details.
H. Position (Horizontal Position)
Adjusts the horizontal position of the projected image on the screen.
V. Position (Vertical Position)
Adjusts the vertical position of the projected image on the screen.
Frequency
Matches the projector's refresh rate to the computer's graphics card for stable display.
Tracking
Synchronizes signal timing to correct unstable or flickering images.
HDMI Color Range
Adjusts color range for HDMI input to prevent color display errors.
HDMI Scan Info
Adjusts the overscan ratio for the HDMI image displayed on the screen.
Low Input Lag
Reduces input to output latency, ideal for gaming environments.
Setting
Startup Screen
Selects or customizes the projector's startup screen display.
Screen Capture
Captures the current image to use as a custom startup screen.
Source Selection
Manually selects input source or allows automatic detection of the signal.
Closed Caption
Selects preferred closed captioning mode or disables the feature.
VGA OUT (Standby)
Outputs VGA signal when the projector is in standby mode.
USB 5V
Enables 5V power output from MHL/USB ports when the projector is turned on.
HDMI CEC
Allows synchronized power ON/OFF operation with CEC-compatible devices via HDMI/MHL.
Security
Configures projector security settings, including password protection and lock functions.
Timeout (Min.)
Sets the duration before the projector prompts for password re-entry.
User Password
Sets up or changes the user password for accessing projector security features.
Administrator Password
Sets or retrieves the administrator password for advanced security management.
Lock User Startup Screen
Locks the startup screen, preventing changes via startup screen or capture functions.
Reset
Returns all display parameters on all menus to their factory default settings.
Management
ECO Mode
Dims the projector lamp to reduce power consumption and extend lamp life.
High Altitude
Activates high altitude mode, ensuring fans operate at full speed for cooling.
Turn Off Mode
Selects between standard turn-off or instant resume for quick restarts.
Auto Shutdown (Minutes)
Automatically shuts down the projector after a set period of no input signal.
Menu Display Time (Seconds)
Sets how long the OSD menu remains active after the last user input.
AC Power On
Automatically turns the projector on when AC power is supplied.
Control Panel Lock
Disables control panel keys to prevent accidental operation or unauthorized changes.
Audio
Volume
Adjusts the main audio volume level for the projector's sound output.
Mute
Turns the projector's audio output on or off.
Power On/Off Volume
Adjusts the volume level for notification sounds when powering on/off.
Alarm Volume
Adjusts the volume for any system warning notifications or alerts.
3D
3D Functionality
Enables or disables the projector's 3D display capabilities.
3D Format
Selects the appropriate 3D format to match the content being viewed.
24P 3D
Sets the refresh rate for 24-frame progressive scan 3D content.
3D L/R Invert
Inverts left/right image sequences for correct 3D viewing alignment.
3D Warning Message
Controls the display of warning messages when 3D mode is active.
Appendices
Troubleshooting
Provides solutions for common problems encountered with the projector's image and operation.
Need help?
Do you have a question about the A1P1701 Series and is the answer not in the manual?
Questions and answers