Related Manuals for Taxitronic TX40
Summarization of Contents
Electrical Installation
Power Supply
Details the pin assignment and function for the power supply connector.
Impulse Generator
Lists connections for the impulse generator, including ground and signal.
Parallel Rooflight
Describes the connections for parallel rooflight signals and outputs.
Serial Port
Outlines pin assignments and functions for the serial data port.
Serial Rooflight
Specifies connector orientation and functions for the serial rooflight.
CAN Bus
Details the connections for CAN Bus communication.
CAN Bus 2 (TX40 only)
Lists connections for the TX40 specific CAN Bus 2 interface.
Sealing
3.1. Sealing
Describes the purpose and locations of seals on the taximeter box and connectors.
Impulse Generator
5.1. Introduction
Explains the function of the pulse generator for mechanical speedometers.
5.2. Installation
Covers the process of installing the pulse generator with the taximeter.
5.2.1. Assembly of the Speedometer Cable and Pulse Generator
Details the steps for assembling the speedometer cable and pulse generator.
5.2.2. Cable Connection, Cover Closing and Pulse Generator Support
Explains how to connect the pulse generator cable and close the cover.
Need help?
Do you have a question about the TX40 and is the answer not in the manual?
Questions and answers