Table of Contents
Advertisement
All manuals and user guides at all-guides.com
SERVICE MANUAL
Ver. 1.0 2006.04
• SA-FT1H is composed of following models.
COMPONENT MODEL NAME
FRONT/SURROUND SPEAKER
CENTER SPEAKER
SUBWOOFER
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, from 45 – 180 Hz; rated 120 watts per
channel minimum RMS power, with no more than 10% total
harmonic distortion from 250 milliwatts to rated output.
SS-MSPFT1 (front speakers)
Speaker system
2 way, magnetically
shielded
Speaker units
Woofer: 8 cm, cone type
Tweeter: 2.5 cm, balanced
dome type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power:
110 W
Sensitivity level
84 dB (1 W, 1 m)
Frequency range
140 Hz - 50,000 Hz
Dimensions (w/h/d)
Approx. 108 × 215 × 44 mm
with table top stand
Approx. 108 × 224 × 44 mm
(Diameter of base:
150 mm)
Mass
Approx. 0.5 kg
with table top stand
Approx. 0.6 kg
Sony Corporation
9-887-229-01
Home Audio Division
2006D04-1
Published by Sony Techno Create Corporation
© 2006.04
SS-CNPFT1/MSPFT1/SRPFT1
SA-WPFT1
SS-MSPFT1
SS-SRPFT1
SS-MSPFT1/SRPFT1
SS-CNPFT1
SA-WPFT1
SPECIFICATIONS
SS-SRPFT1 (surround speakers)
Speaker system
Speaker units
Enclosure type
Rated impedance
Power handling capacity
Maximum input power:
Sensitivity level
Frequency range
Dimensions (w/h/d)
Mass
HOME THEATRE SPEAKER SYSTEM
SA-FT1H/WPFT1/
Canadian Model
SS-CNPFT1
1 way, magnetically
shielded
Full range: 8 cm, cone type
Bass reflex
8 ohms
110 W
84 dB (1 W, 1 m)
140 Hz - 20,000 Hz
Approx. 108 × 215 × 44 mm
with table top stand
Approx. 108 × 224 × 44 mm
(Diameter of base:
153 mm)
Approx. 0.45 kg
with table top stand
Approx. 0.55 kg
US Model
– Continued on next page –
Advertisement
Table of Contents
Related Manuals for Sony SS-SRPFT1
Summarization of Contents
Product Overview and Specifications
Component Model Identification
Lists the individual speaker models that comprise the SA-FT1H system.
System Technical Specifications
Details performance and physical attributes for each speaker model (e.g., impedance, sensitivity, frequency range).
Safety Check-out and Leakage Testing
Essential post-service safety procedures and methods for testing AC leakage.
Disassembly Procedures
Back Panel and Amplifier Section
Instructions for removing the back panel and the amplifier unit from the equipment.
Board and Heat Sink Removal
Details on removing the heat sink, control/AC, and main boards.
Diagrams and Schematics
Circuit Board Locations and Block Diagram
Identifies the location of internal circuit boards and provides a high-level system overview.
Printed Wiring Board Layouts
Illustrates component placement on the main and control printed circuit boards.
Main Section Schematic Diagram
Detailed electrical circuit schematic for the main section of the system.
Exploded Views
Subwoofer and Center Speaker Views
Visual breakdown of physical components for the subwoofer and center speakers.
Front and Surround Speaker Views
Visual breakdown of physical components for the front and surround speakers.
Electrical Parts List
Component Lists for Boards
Detailed listing of electronic components for the control, power amp, and volume boards.
Miscellaneous Parts and Accessories
Lists remaining parts, power cords, speaker cords, and other included accessories.
Need help?
Do you have a question about the SS-SRPFT1 and is the answer not in the manual?
Questions and answers