Advertisement
Table of Contents
- 1 Table of Contents
- 2 Accessories / 配件
- 3 Specification / 產品規格
- 4 Case Features / 機殼特色
- 5 Side & Front View/ 側面和前面
- 6 IO Panel / IO 面板
- 7 SSD & HDD Installation/ SSD 和硬碟安裝方式
- 8 Opening the Left & Right Side Cover/ 開啟左右側板
- 9 Motherboard Installation / 安裝主機板
- 10 Cables Connection / 連接接頭
- 11 Graphics Card Installation / 安裝顯示卡
- 12 PSU Installation / 安裝電源供應器
- Download this manual
Advertisement
Table of Contents
Related Manuals for MSI MPG GUNGNIR 111R
Summarization of Contents
Accessories
Fan Splitter Cable
Connects multiple fans to a single motherboard header or controller.
RGB Splitter Cable
Connects multiple RGB LED fans and strips for lighting synchronization.
Cable Ties
Used for organizing and managing internal cables for a clean build.
Mounting Screws
Various screws for securing components like motherboard, SSD, PSU, and HDD.
Specifications
Fan LED Controller
Details the 1 to 6 ARGB (3-pin) control board for managing RGB lighting.
Pre-Installed Fan Configuration
Lists the number and type of fans pre-installed in different GUNGNIR models.
Case Dimensions
Provides the physical dimensions of the computer case in millimeters and inches.
Motherboard Support
Specifies the supported motherboard form factors: ATX, M-ATX, and Mini-ITX.
Drive Bay Configuration
Details the available drive bays for 3.5"/2.5" combo drives and 2.5" SSDs.
I/O Panel and Functionality
Front Panel I/O Ports
Details the components of the I/O panel including power, reset, USB, and audio jacks.
Fan and Radiator Support
Specifies the mounting positions and sizes for fans and radiators.
Internal Clearances
Provides maximum height for CPU coolers and length for graphics cards and PSUs.
Chassis Material
Describes the materials used for different parts of the case construction.
Case Features Overview
Exploded View of Components
An illustrated breakdown of the case and its main components.
Dimensional Views
Front and Side Profile Dimensions
Illustrates the case with key dimensions for front and side views.
I/O Panel Details
Front Panel Port Identification
Identifies each port on the front I/O panel with corresponding numbers and names.
LED Effects Control
Explains how to control LED effects using the dedicated switch button.
Storage Installation
SSD and HDD Mounting
Illustrates the process for installing Solid State Drives (SSD) and Hard Disk Drives (HDD).
Side Panel Removal
Opening Side Covers
Demonstrates the procedure for removing the left and right side panels of the case.
Motherboard Mounting
Motherboard Installation Procedure
Illustrates the steps and screw points for installing the motherboard.
Internal Cabling
Front Panel Connector Guide
Shows how to connect front panel headers like USB, HD AUDIO, and power switches.
SATA Power Connection
Illustrates the connection of SATA power cables to components.
Graphics Card Installation
PCIe Slot Installation
Demonstrates the process of installing a graphics card into the PCIe slots.
Power Supply Installation
PSU Mounting Procedure
Illustrates the steps for installing the Power Supply Unit (PSU) into the case.
Need help?
Do you have a question about the MPG GUNGNIR 111R and is the answer not in the manual?
Questions and answers