Remove the front Bezel / 移除前面板 / 移除前面板 *Keep pressing the LED/RESET button for three seconds, and then users can control the lighting effects via syncing with the motherboard by MSI mystic light app. (GUNGNIR 100 only) *長按三秒前置面板上的 LED/RESET按鍵,即可透過MSI mystic light 調整多種炫光模式。(僅限於GUNGNIR 100) *长按三秒前置面板上的LED/RESET按键,即可透过MSI...
Please refer to your motherboard users’ manual to intall the front panel I/O. The drawings here are for reference only. reference only. 請參照您的主機板手冊安裝前置I/O,畫面中的圖示僅供參考 请参照您的主板手册安装前置I/O,画面中的图示仅供参考 *Connect LED/Reset to MSI ARGB Hub for LED Function/ Connect LED/Reset on Motherboard reset pinheader for Reset Function *將LED/Reset線材連接至MSI ARGB控制器即可透過前置面板切換燈光/ 將LED/Reset線材連接至主機板Reset插孔可進行一般Reset功能 *将LED/Reset线材连接至MSI ARGB控制器即可透过前置面板切换灯光/ 将LED/Reset线材连接至主机板Reset插孔可进行一般Reset功能...
Page 12
Connect Front LED/ 連結前置幻彩控制板 Connect PWM Mode and ARGB LED to motherboard 將PWM模式和幻彩燈光風扇接口與主機板進行連結 Specifications are subject to change without notice. 規格若有變更 ,恕不另行通知 规格若有变更 ,恕不另行通知 MPG GUNGNIR 100 / 100D / 100P...
Need help?
Do you have a question about the MPG GUNGNIR 100 and is the answer not in the manual?
Questions and answers