Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SUNPRO SP400-108M10
Summarization of Contents
INTRODUCTION FOR USER MANUAL
DISCLAIMER
Manual change rights, Chinese version prevails, warranty implications for non-compliance.
LIMITATION OF LIABILITY
Company not liable for damages from improper installation or use.
SAFETY PRECAUTIONS
WARNING
Read all instructions before installation; DC current can cause death.
GENERAL SAFETY
Comply with local codes, use trained personnel, secure area, wear protective clothing.
HANDLING SAFETY
Avoid standing on modules, scratching surfaces, dragging cables, or handling in high winds.
UNLOAD/TRANSPROTATION/STORAGE
MAKERS ON OUTER PACKAGING
Pictorial guide for handling and transporting modules based on packaging.
UNLOADING WARNNING
Guidelines for safely unloading modules from trucks using lifting fixtures and forklifts.
SECONDARY TRANSPORT AND WARNING
Recommendations for transporting modules within the project site and long-distance.
STORAGE
Guidelines for storing modules in a dry, ventilated, and protected environment.
ELECTRICAL RATING
Technical specifications and electrical ratings for various module types.
INSTALLATION
INSTALLATION SAFETY
Safety precautions during installation, including PPE and site conditions.
ENVIRONMENT CONDITIONS AND SITE SELECTION
Recommended working and storage temperatures, and humidity levels for module operation.
TILT ANGLE OF INSTALLATION
Importance of proper tilt angle for maximizing energy output and minimizing shading.
INSTALLATION REQUIREMENTS FOR BIFACIAL CELLS MODULE
Installation considerations for bifacial modules to maximize power generation from reflected light.
INSTALLATION METHOD
Methods for mounting PV modules using clamps and ensuring structural integrity.
MECHANICAL INSTALLATION AND WARNING
Guidelines for mechanical installation, clamp usage, and structural load considerations.
ELECTRICAL INSTALLATION
Procedures and precautions for electrical connections, cable layout, and wiring.
MODULE MAINTENANCE
PANEL VISUAL INSPECTION AND REPLACEMENT
Procedures for inspecting modules for damage and replacing them if necessary.
CONNECTOR AND CABLE INSPECTION
Recommended checks for junction boxes, wiring, connectors, and mounting hardware.
CLEANING
Guidelines for cleaning PV module surfaces to maintain performance and avoid damage.
MODULE INSPECTION AFTER CLEANING
Checks to ensure modules are clean, free of stains, and have no visible damage after cleaning.
TROUBLESHOOTING
Recommended actions if the PV system is not working properly, including contacting installers.
Need help?
Do you have a question about the SP400-108M10 and is the answer not in the manual?
Questions and answers