Related Manuals for EKOVENT EKO-TD
Summarization of Contents
General Product Information
Transport and Handling
Details on how the product is transported and handled to prevent damage.
Storage and Commissioning
Guidelines for temporary storage and conditions for product commissioning.
Personnel Requirements
Specifies that installation must be performed by trained personnel following manual instructions.
Lifting and Anchoring
Lifting Instructions and Safety
Precautions for safe lifting, including using designated equipment and trained personnel.
Anchoring Preparation
Information on how roof hoods are prepared for anchoring, using lifting eyes or pre-punched holes.
Installation EKO-T and EKO-TD
Cut-out Size Calculation
Guidance on calculating the roof cut-out size, considering roof slope and dimensions.
Mounting Procedure
Steps for securing the roof inlet using lifting points, brackets, and sealing methods.
Installation of EKO-SUH
EKO-SUH Placement and Securing
Instructions for positioning and fixing the EKO-SUH unit within the roof hood outlet.
Desired Area Calculation
Formula and explanation for calculating the required outlet area based on airflow and speed.
Mount Frame Installation
Mount Frame Assembly
Step-by-step guide for assembling the four-plate mounting frame.
Roof Hood Installation
Hood Placement and Attachment
Instructions for placing and attaching the roof hood onto the mounting frame.
Gasket for Combined Hoods
Guidance on installing the gasket for combined hood models between air streams.
Maintenance and Cleaning
Maintenance Checks
Procedures for checking the hood for damage, secure attachment, and mesh integrity.
Cleaning Guidelines
Recommendations for cleaning the hood, including what not to use (e.g., high-pressure cleaners).
Need help?
Do you have a question about the EKO-TD and is the answer not in the manual?
Questions and answers