Related Manuals for SP Scientific FTS FLEXICOOL IMMERSION COOLERS FC100
Summarization of Contents
Introduction
Overview
Introduces the FTS Systems FlexiCool FC50 and FC100 immersion coolers, highlighting capabilities.
Key Features
Lists the main features and technical specifications of the FlexiCool units.
Key Benefits
Outlines the advantages and benefits of using the FlexiCool immersion coolers.
Getting Started
Initial Inspection
Instructions for inspecting the unit upon delivery for any shipping damage.
Lifting the FlexiCool
Provides safety guidelines and techniques for lifting and moving the FlexiCool unit.
Setup
Details the requirements for installing the FlexiCool unit in a laboratory environment.
Ambient Conditions
Specifies the ideal and acceptable ambient temperature ranges for optimal operation.
Air Flow Considerations
Explains the importance of adequate airflow for cooling system performance and longevity.
Electrical Requirements
Outlines the necessary electrical specifications, voltage, and plug types for the FlexiCool units.
IEC Protection - Class 1
Describes the grounding requirements and connection for Class 1 protection.
Services and Utilities
Guides users on identifying essential unit information and ensuring proper power supply.
Installation
Provides detailed instructions and precautions for the physical installation of the unit.
System Preparation
Steps for preparing the system, including sensor connection and power connection.
Operation
Front Panel Display
Identifies and explains the components of the FlexiCool's front panel interface.
Basic Operation
Step-by-step guide on how to start up, control, and operate the FlexiCool unit.
Control
Instructions for adjusting setpoints and controlling the unit's temperature.
Powering Off
Procedure for safely shutting down and powering off the FlexiCool unit.
Delivery Line
Information and precautions regarding the handling and maintenance of the refrigerant delivery line.
Probes
Describes the different types of probes available and their specific handling precautions.
Sound Level
Reports the measured sound pressure level (SPL) of the FlexiCool unit.
SOLO4848 Controller
Overview
Provides a general introduction to the SOLO4848 controller and its integration.
Display and Keypad Identification and Use
Explains the controller's display elements and the function of each keypad button.
Controller Functions and Indicators
Details the operation of PV/SV displays, buttons, and status indicators like Auto Tuning and Alarm.
Temperature Control and Restarting
Explains PID operation, temperature units, and recommended restart procedures.
Multiple Machine / Controller Setup
Instructions for networking multiple FlexiCool units using communication kits.
Connection Procedure
Steps for physically connecting units in a daisy chain for networking.
Controller Setup
Procedure for configuring network addresses and settings for multiple controllers.
Monitoring Software Procedure
Guide on using the monitoring software to connect and manage units.
Maintenance
Cleaning
Step-by-step guide for cleaning the exterior and internal components of the unit.
Compressor Safeties
Discusses safety features related to the refrigeration system's compressors.
Refrigerant Types and Properties
Lists the refrigerants used and their properties according to NFPA ratings.
Refrigeration System
Explains the safety devices protecting the refrigeration system's compressors.
Need help?
Do you have a question about the FTS FLEXICOOL IMMERSION COOLERS FC100 and is the answer not in the manual?
Questions and answers