Before using this vehicle for the first time, please read this manual carefully. This manual is applicable to BJ2021, BJ2022 series light off-road vehicle and its

derivative models. This manual is helpful for you to get familiar with the structure, functions, usage and related regulations of the company. Any loss caused

by failure to follow the instructions of this manual or modification without the approval of the company, the user will lose the right to claim, and any warranty

claim will be denied by the authorized service provider of the company. The contents contained in the manual will help you master the correct methods of

driving and maintenance of the vehicle, so that you can enjoy driving fully.

This manual aims to provide users with instructions on the use and maintenance of BJ2021, BJ2022 series light off-road vehicles and their derivative models.

Please check the purchase contract for the specific configuration of the vehicles you purchase. If you have any questions about this car and this manual, please

contact BAIC authorised dealership in your territory.

The equipment and performance of subsequent models will be subject to change without prior notice, as the company will continue to modify and improve the

vehicles. . Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for

equipment not installed on your vehicle.If you have any questions about the vehicle and this manual, please contact BAIC authorised dealership in your

territory.

Drivers must strictly abide by all car-related laws and regulations. At the time of writing this manual, the relevant effective laws and regulations have been

fully considered and complied with, but some of the items may not meet the latest revised laws and regulations at the time of purchase.

When you resell the vehicle, please attach this manual to the new user so that the new user can obtain the relevant information in the manual.

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the BJ 2022 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for BAIC BJ 2022 Series

Page 1 . Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle.If you have any questions about the vehicle and this manual, please contact BAIC authorised dealership in your territory.
Page 2 Some of the equipment described in this article may not be equipped on the model (please contact BAIC authorised dealership in your territory。 No part of this manual may be reproduced, copied, or translated without the written consent of the company, and may not be reproduced, stored in a public retrieval system, or transmitted electronically, mechanically, or in any other form.
Page 3 Catalogue 1.Safety operation instruction ........ 3 3. Driving Guide ............134 Safety Driving ................4 Start and driving ............... 135 Seat Belt ...................10 Drivetrian system ..............145 Airbag system ................21 Brake system ................146 Children safety .................33 Parking assistant system ............160 Safety label ................39 Driving skills................
Page 4 Catalogue Coolant ...................198 6. Technical data ............134 Brake fluid ................202 Identification code ..............135 Power Steering fluid ..............205 Vehicle parameters ..............145 Battery ..................207 Windshield washer fluid and wiper blade .........211 Tyre ..................214 5. When trouble arise ..........222 Warning triangle ..............223 Spare tire and tools ..............224 Fuse replacement ..............232...
Page 5 1. Safe operation instruction Safe Driving ......................4 Seat Belt ......................10 Airbag system ......................21 Vehicle safety for Children ..................33 Safety Label .......................39...
Page 6 Safe Driving Safe Driving Correctly adjust the seat Be aware of the dangers of air bags Before drive the vehicle, all passengers should Airbags provide protection, but they can also General Instructions make the seat back upright, adjust the seat back cause serious or even fatal injuries to passengers and fasten the seat belt correctly.
Page 7 Safe Driving Control the speed The properly sitting posture Warning Overspeed is the main cause of crash accidents. Correct Sitting Posture of Driver ● Do not distract yourself from outside The faster the speed, the greater the risk. Do not The sitting posture of the driver relates directly overspeed the specified maximum speed limit factors while driving, such as talking to the...
Page 8 Safe Driving ●Adjust the headrest so that its upper edge is Warning level with the top of your head, and keep the back of your head as close to the headrest as To reduce the risk of injury during an accident, please make sure that passengers possible.
Page 9 Safe Driving Correct Sitting Posture of Front Passenger Correct Sitting Posture for Rear Passengers Warning To ensure his/her safety and to reduce the risk To ensure safety and reduce the risk of injuries of injury, the front passenger should perform the during accidents, rear passengers must comply To reduce the risk of injury during an following operations：...
Page 10 Safe Driving Correctly Adjust Headrest Adjust the headrest so that its upper edge is been started, be sure to immediately stop the level with the top of your head, and keep the vehicle and only start driving again after you back of your head as close to the headrest as have adjusted the headrest to the correct possible.
Page 11 Safe Driving (Only for model with automatic transmission) Driver Side Foot Mat When driving the vehicle, ensure that all the pedals can be fully pressed to their limit and The foot mat should be fixed inside the foot come back to their original positions, with no well and should not obstruct pedal movement obstruction in the whole process.
Page 12 Seat Belt Seat Belt Warning Warning 1. General Instructions To reduce the risk of accident injuries, make ●Pregnant women and the disabled must sure that strictly follow these also wear seat belts. Otherwise, these drivers Your life is precious. Please make sure that instructions: or passengers may also be seriously injured.
Page 13 BAIC dealership. possible to insert the latch into the buckle. ●The seat belt must be kept clean at all Even if there is no apparent deformation in times.
Page 14 Seat Belt The other sections of this Chapter will explain Physical Principles Frontal in greater detail how to ensure your safety to the Collisions maximum extent. However, please note that even when a seat belt is used correctly and the airbag has been inflated, it is still not possible to completely rule out the risk of death in accidents involving violent vehicle collisions.
Page 15 Seat Belt Consequences of Not Wearing a Seat Belt Many people think that during a light vehicle collision, they can use their hands to protect their body and thus prevent injury. This is a misunderstanding! During a vehicle collision, inertia will continue to propel all vehicle occupants not using seat belts, forward at the pre-collision speed.
Page 16 Seat Belt Warning Warning ●Do NOT use your hands to try to protect ●The seat belt must be worn in the correct your body during a collision. It may cause position. serious injury to you. ●Sharing one seat belt between two people is ●There is no way for the airbag to replace prohibited, even if they are children.
Page 17 Warning If the seat belt cannot be pulled out, you should pay attention to driving safety and go to an authorized BAIC dealership to have the seat belt checked. If the ignition switch has been turned on but the Correctly adjust the front seat and its headrest,...
Page 18 Seat Belt Wear a Rear Seat Belt Seat belt Wearing Position Warning In the event of an accident, failure to correctly wear the seat belt will make it impossible for the seat belt to play its protective role, thus causing serious personal injury.
Page 19 Seat Belt Adjust seat belt height To adjust the seat belt upwards, directly raise Warning the seat belt height adjustment device until it reaches the proper position. The methods to The protective role of the seat belt can only adjust the seat belt downwards areas follows: come into full play when the back rest is in 1.
Page 20 Seat Belt Should Pregnant Women When driving, you should keep an upright Unfastening Seat Belt sitting posture and move the driver’s seat Wear a Seat Belt? backwards to a proper position to ensure that you can freely operate the vehicle. If you are sitting in front seat, make sure you move the seat backwards as much as possible, this will reduce the risk of injury to both mother and...
Page 21 If any of the following situations arise, please injuring passengers when the seat belt is contact an authorized BAIC dealership as soon Cautions retracting quickly. as possible: ●When the seat belt retractor is triggered, a ●The front part (marked in the figure) has been...
Page 22 BAIC increase the risk of accident injuries. dealership. Otherwise, damage may be caused ●...
Page 23 Airbag System Airbag System The Role of the Airbag deployment area airbag. fast-deploying airbag may cause injury or death General Instructions of these passengers. This is particularly true in the case of children. Correctly using seat belts can effectively reduce The driver and passengers must keep as far the risk of accident injuries.
Page 24 Airbag System Wearing Seat Belts Warning Warning Adopting Correct Sitting The factors that determine whether the The release of the airbag happens very Posture Are Important airbag is triggered or not at the time of quickly. If you are not in the correct sitting To enable the airbag to play its best protective collision are related to the magnitude of position when it triggers, you may be fatally...
Page 25 In such a case, you must go to an authorized BAIC dealership to arrange a check: 1. When the ignition switch is in the “ON” position, the airbag fault warning light does not light up or flash.
Page 26 Otherwise, if an authorized BAIC dealership. This is the front passenger-side airbag is triggered, because authorized BAIC dealerships are these items may fall and cause injuries to...
Page 27 Airbag System Front Airbags Warning ●Make sure to go to an authorized BAIC dealership to have the airbag system checked and repaired. ●Do NOT try to refit the front bumper or any of the vehicle body structures on your own.
Page 28 Warning wheel, the dashboard and the airbag assembly, inside the dashboard, or above the ●Make sure to go to an authorized BAIC passenger-side glove box is prohibited. This is dealership to have the airbag system checked because, when the vehicle is involved in a and repaired.
Page 29 Therefore, some minor must go to an authorized BAIC dealership to collisions may cause injuries because the frontal have it replaced. airbags do not deploy. By contrast, some relatively small structural damage may result in the deployment of the front airbags.
Page 30 If any of the following situations arises, please Deployment of the airbag ●The pad part of the steering wheel or the contact an authorized BAIC dealership as soon cover of the front passenger airbag (area shown as possible: by the arrow in the figure) is scratched or ●A frontal airbag has been inflated.
Page 31 Airbag System If the vehicle is subjected to severe impact from Caution the bottom, such as flying over a step, striking a After the front airbag has deployed, some of step or hard object, crossing a deep pit or its components will be hot. Do not touch it scraping the chassis, even if the deformation of before it cools down.
Page 32 Airbag System Seating Position Conditions Under Which Airbag To ensure the best protective function, during Does Not Deploy serious impacts, the front airbags must unfold In many types of accident, such as when the rear within a certain period of time. part of the vehicle is in a collision or a second or If the vehicle passengers are too close to the third time collision during a chain of collisions,...
Page 33 Airbag System Slanted Collision (oblique collision) Side Collision Rear-End Collision In the event of a slanted collision, the collision In the event of a side collision, passengers move When the front airbag is triggered, it is ejected force will move the passengers in a direction in towards the point of impact.
Page 34 Airbag System Rear collision Tipping Accident Special Collisions In the event of a rear collision, the driver will by In a tipping accident, the front airbag will not If the vehicle collides with certain objects, such deploy, because even if it deploys, it still could instinct engage in emergency braking.
Page 35 Car Safety for Children Car Safety for Children When Several Child Passengers Safety Instructions for Child Seats Have To Be Carried General Instructions There are three rear seats in your vehicle and Accident statistics verify that it is safer for you can use them to properly place child children to sit in the rear rather than the front passengers.
Page 36 Car Safety for Children ●When driving, do NOT become distracted by ●event of emergency braking or accident, the children in your vehicle. their abdomen or neck may be injured. ●When driving over a long period of time, be ●One child seat can only be used by one sure to have a rest midway through your trip child.
Page 37 Car Safety for Children Child Seat Class 1 child seats Class 2 child seats Child Seat Grade Classification (for reference use only): Class 0/0+ child seats Children who are under seven years old and Babies or infants who are under 4 years old and have a body weight of 15-25Kg should use a have a body weight of 9-18Kg should use a three-point seat belt along with a Class 2 child...
Page 38 Car Safety for Children Class 3 child seats Warning Warning ●The upper part of the seat belt must run ●The upper part of the seat belt must run over the mid-point of the shoulder. In no over the mid-point of the shoulder. In no circumstances should it run across the neck.
Page 39 Car Safety for Children Correctly install the Child Seat Installing a Child Seat Equipped Before installing a child seat on the rear seat, with an ISOFIX System and Top make sure you adjust the front seat to a suitable Fastening Cord position according to the dimensions of the Be absolutely sure to install and remove the child seat and the body size of the child.
Page 40 Car Safety for Children Installing Warning 1. Slightly push up the headrest behind the child seat. ●The ISOFIX fixing ring on the back of the 2. Run the top fastening cord through the rear seats can only be used for the ISOFIX headrest or, depending on the child seat system.
Page 41 Safety label The positions of the safety labels of the vehicle Safety label are as shown in the figure. The airbag label is pasted to the outer side of the sun visor (in a closed state) on the front passenger’s side, while the A/C refrigerant label, the fan &...
Page 42 2. Operation and Equipment Cab ........................41 Locking and unlocking the vehicle ..............74 A/C system ......................98 Light and vision field ...................108 Seat and storage facilities ..................119 Accessories and Refitting ..................132 ※Note: Numbers in all pictures of this chapter are for illustrative purpose only and do not necessarily reflect the real situation of the vehicle.
Page 43 General Layout of Instruments and Operating Mechanisms 1. Left loudspeaker 2. Steering wheel left button group 3. Horn 4. Steering wheel 5. Steering wheel right button group 6. Driver's visor 7. Central display screen 8. Vehicle Rearview Mirror 9. Passenger handrail 10.
Page 44 16. Glove box handle 17. Right air conditioning central outlet 18. Start/stop buttons, 4WD switches 19. The cigarette lighter 20. Electrical switch 21. Air conditioning control panel 22. Left air conditioning central outlet 23. Multifunctional Switch Set 24. Left air conditioning outlet...
Page 45 Central passageway layout (for vehicles equipped with manual gearbox) 1. Front row central armrest 2. Cup holder 3. Multifunctional keys 4. Gearbox shift lever 5. Electronic Parking Brake Key 6. AUTOHOLD Key * 7. The cigarette lighter...
Page 46 Central passageway layout (for vehicles equipped with automatic gearbox) 1. Front row central armrest/storage box 2. Central Storage Box Switch 3. Multifunctional keys 4. The cigarette lighter 5. Cup holder 6. Gearbox shift lever 7. Electronic Parking Brake Key 8. AUTOHOLD Key 9.
Page 47 Instrument Cluster (Mode 1) 1. Tachometer 2. Gear Display 3. Trip computer: Short-term Memory, Long-term Memory, Fuel Consumption Information, Other Information and System Failure Information 4. Speedometer 5. Turbine pressure 6. Engine coolant temperature gauge 7. Outdoor temperature 8. Multimedia Information 9.
Page 48 Instrument Cluster (mode 2) 1. Relative height 2. The atmospheric pressure 3. Tachometer Trip Computer: Short-term Memory, Long-term Memory, Fuel Consumption Information, Other Information and System Failure Information 5. Off-road Information 6. Engine coolant temperature gauge 7. Outdoor temperature 8. Multimedia Information 9.
Page 49 Engine tachometer Speedometer Caution The engine tachometer represents the engine's Engine tachometer should not be kept in red speed per minute. （rpm） area, otherwise the engine will be easily damaged. Tips Promptly shift up helps to save fuel and reduce engine noise. The recommended RPM for manual gearing is 1900-2500.
Page 50 Fuel Gauge When braking, accelerating, turning or ramping, Fuel alarm lamp the fuel in the fuel tank will shake, which will affect the accuracy of fuel gauge display. The vehicle should be placed on a flat road to check the fuel volume. After filling the fuel, it will take some time for the fuel level to stabilize before the fuel gauge can reflect the real fuel volume.
Page 51 Engine coolant temperature gauge If the scale bar is biased or stays in the high Tips temperature range of the water thermometer for Vehicles driving on uphill and downhill or many times, and the coolant alarm lamp in the bumpy road will cause fuel level instability, tachometer is lit, the engine should be stopped which will cause fuel alarm lamp alarm, and extinguished as soon as possible in an...
Page 52 Engine coolant alarm lamp Left and Right Turn Indicators Warning When the engine is running, it is strictly forbidden to open the coolant expansion tank cover. Because it's hot and cold under high pressure. But the liquid and steam will be ejected, causing burns.
Page 53 Four-drive status indicator Trip Computer Information Center Display Screen 1. Four-wheel-drive high-grade status indicator Short-term memory and long-term memory Short-term memory, long-term memory, other "4H": When this light is on, it indicates that the information from left to right are driving time, information and fuel consumption display are vehicle high-grade...
Page 54 Accumulated driving kilometres after long-term Other information Engine working time: The accumulated time after the start of the automobile engine can be memory zero; Average fuel consumption since the last cleared in the following two ways: under the short-term/long-term memory zero shows the engine working time interface, by pressing the BACK button for 5 seconds for a long time, and average fuel consumption during vehicle...
Page 55 Turbine Pressure Display Overspeed Alarm Fuel consumption display Fuel consumption information includes idling instantaneous fuel consumption and driving instantaneous fuel consumption. Instantaneous fuel consumption display "-. -L/h" when engine is not starting (RUN gear) and no fuel injection output. The degree of turbocharger operation is Users set alarm speed by themselves in menu, indicated by the progress bar.
Page 56 Computer information for driving Date/time display： Display format YYYY/MM/DD HH/MM/SS, below default display 24-hour system； Odometer display： Displays the total distance the vehicle has been driven. This mileage cannot be cleared. Instantaneous fuel consumption： The demonstration range of instantaneous fuel consumption during driving is as follows: 0 ～...
Page 57 Information Display Center ●Front wheel steering interface* (if equipped) Tips ●System Setup Interface Geomagnetic principle the compass is greatly Navigation Information Display Center affected by the magnetic field. If it passes through areas with complex magnetic field or areas with large electromagnetic Tyre pressure system...
Page 58 Environment Information Interface 2. Relative height Vehicle Alarm Information The height reference value obtained from the Interface difference between the atmospheric pressure detected by the vehicle instrument and the standard atmospheric pressure. ABS System Failure Tips The relative height value is not recommended height measurement because...
Page 59 ●Brake fluid level is low ●SD card is out of order. Please replace it ●Please step on the clutch to start ●Low oil pressure ●SD card is not formatted, please format SD ●Please switch to P stop card ●High engine temperature ●Forgotten keys in the car ●Please check the parking monitor video ●The oil problem caused the engine to knock...
Page 60 Prompt Message Interface From next maintenance (500/200/100km) Information Center System Settings Please maintain immediately System Setting Interface Please turn off the light The vehicle speed has exceeded XXXKM /h Sport mode On The vehicle speed exceeded 120km/h Tire pressure system Vehicle stability system...
Page 61 Overspeed Alarm Alarm Volume Overspeed Alarm Overspeed Alarm Overspeed Alarm Setting Alarm Volume Open 120 km/h Alarm Volume Shut Down Maintenance Information Maintenance Information Compass Calibration Compass Calibration 2. The default value of overspeed alarm setting is 30km/h, setting range: 30-200km/h; Enter the alarm volume setting page through the 1.
Page 62 Maintenance Information Overspeed Alarm High Maintenance interval: 5000km Alarm Volume Middle Maintenance Information Compass Calibration After entering the maintenance information Enter the alarm volume setting interface through inquiry interface through the menu, press Enter the maintenance information inquiry page the menu, press "UP"/" DOWN "to select, and "BACK"...
Page 63 Compass Calibration Overspeed Alarm Being Calibration Alarm Volume Calibration completed End calibration Maintenance Information Compass Calibration 1. After entering the compass calibration page 2. The driver needs to slowly start the car to Enter the compass calibration page through the drive the "circle"...
Page 64 Mode Switch Current Fault Query Alarm Volume Maintenance Information Compass Calibration To Off-Road Mode 1. After entering the current fault inquiry Press "OK" to switch between "city mode" and interface, the current existing faults of the Long press "DOWN" 5s in the first level "off-road mode", and press "BACK"...
Page 65 Warning Light 1. 4H (four-wheel drive high-grade) / 4L (four-wheel drive low-gear), indicator light for snow mode/sports mode 2. Gearbox failure indicator 3. ABS failure indicator 4. ESP indicator 5. ESP turn off indicator 6. Autohold system indicator 7. Downhill auxiliary work/fault indicator 8.
Page 66 17. Engine discharge indicator 1. 4H (four-wheel drive high-grade) / 4L When the start/stop button is in the "RUN" (four-wheel drive low-gear), indicator light for position (the engine is not started), the vehicle 18. EPB indicator 19. Battery indicator snow mode/sports mode self-check, the light will be on for a few seconds, 20.
Page 67 it indicates a failure of the system and must be When the HDC switch is pressed, the HDC 12. Front fog indicator （ Green ） checked at a nearby 4S store as soon as lamp will continue to be on; When the HDC When the front fog light is on, the indicator possible.
Page 68 remains on for several seconds, it indicates that If the warning light does not go out, please go to Warning authorised dealership nearby there is a fault in the system, but the vehicle can still run normally. Please go to authorised maintenance as soon as possible.
Page 69 23. Brake low level indicator （ Red ） Warning Tips The lamp is lit when the parking brake is If the safety belt has been properly worn, but If the warning light is on during driving, stop applied or the brake fluid level is lower than the the warning light is on during driving, immediately and contact the authorised prescribed level.
Page 70 26. EPB failure indicator （ Yellow ） Warning Tips When the start/stop button is in "RUN" mode, When the brake system status and fault ●If the warning light is on during driving, the light will be on for about 3 seconds for warning light is on, please park the vehicle to stop immediately and contact the authorised self-check, and then go out after self-check.
Page 71 Cross-country information Intelligent car service * Intelligent development of intelligent car machine cloud platform, system hardware using 4G communication module, realize online voice recognition, online navigation, online music, driving behavior analysis, news and information and other functions; The function interface Above is the application mall interface There are four level functions on the left side of The horizontal and vertical angles of the vehicle...
Page 72 Service renewal, order inquiry, order deletion Steering Wheel information, SIM card status inquiry, SIM card Adjust steering wheel position replacement, user agreement inquiry, user information modification, user logout, OTA update. 1. Adjust the driver's seat to the correct position, then push down the lock handle to unlock the steering wheel.
Page 73 Multi-function steering wheel Warning Warning Do not direct the steering wheel to your face. ●Improper use of steering wheel position Otherwise, the driver's front airbag will not adjustment devices and incorrect posture can provide effective protection when an accident result in serious injuries. occurs.
Page 74 Left Key Group 5. Move up and down the left side of the Right Key Group * steering wheel to right dial -5-, cruise recovery/speed plus (RES cruise Settings/speed minus (SET -). 6. Press "CANCEL" on the left side of the side panel -6- to CANCEL the constant speed cruise.
Page 75 4. Press MODE button -4- on the right side of Middle Channel Multi-function 2. RADIO button: RADIO select button; the steering wheel to switch the MODE 3. MEDIA button: multimedia button; Button interface in the large audio screen. 4. OPTION key: menu shortcut OPTION; 5.
Page 76 Open and Close Doors Open and Close Doors Caution When using intelligent remote control keys Intelligent Cemote Control Key with transceiver chips, please follow the This car is equipped with 2 intelligent remote following instructions: control keys, the intelligent remote control key ●...
Page 77 Open and Close Doors Intelligent Remote Control Key The effective range of the remote key is about Tips 25 meters, but in some special circumstances, After using the mechanical key, be sure to such as electromagnetic interference nearby or put it back. in the blind spot area of the signal, the range will be reduced.
Page 78 For safety reasons, do remote control when ● Only the same model or the battery near the door. recommended by BAIC can be used for replacement. ● Waste batteries must be disposed of in accordance with local laws.
Page 79 Open and Close Doors Replace the key battery by following steps ： 3. Remove batteries to avoid contact with circuit 2. Unlock the key battery lock, up open the battery cover boards and battery clamps 1. Insert sharp tools into the hole at the bottom 4.
Page 80 Unlock the door Lock the door Remote control key matching If loss of remote control key ， needs to be matched , please go to BAIC's service Store, and the relevant operation is carried out by professional staff through special equipment. Caution...
Page 81 Open and Close Doors Anti-theft alarm system Anti-theft remote control key setting If the vehicle does not satisfy the locking condition, that is, any door is not closed or the The anti-theft alarm system is installed on the ignition switch key is located in the "RUN" vehicle.
Page 82 Open and Close Doors Remove theft by remote control key Whether the trigger signal is removed or not, the Caution system will stop alarming after one cycle of After setting the anti-theft state, the engine alarming. also enters the anti-theft state. At this When there is a new trigger, the alarm will be time,insert the original matched mechanical sent again.
Page 83 Open and Close Doors Unlocked trunk door by Remote Secondary fortification Central Lock System controlled key When the vehicle alarm is triggered, when Operating Instructions of Central Lock pressing the unlock key, the state is released. If System the state of key and door has not changed in a The central lock system can lock and unlock all certain period of time, the system will re-enter doors of car ：...
Page 84 Open and Close Doors Manipulating central door lock with remote Manipulating the central door lock with the control key switch on the driver's side door Press the lock key of the remote control key. If （Equipped vehicles only） the vehicle meets the lock condition, the central door lock system will be locked, the whole vehicle‘s door will locked.
Page 85 Open and Close Doors Automatic locking function Car Door Warning When the vehicle is running at a speed greater Do not leave children or disabled persons than 20 km/h, the central door lock system will alone in the car! Because once the doors are automatically lock.
Page 86 Open and Close Doors Car windows ○ 1 Control the lift of left rear door and window Electric window Caution ○ 2 Controlling the lift of driver's side door and The car is equipped with electric windows on In order to avoid damaging the electric the left and right doors, which can be controlled window window motor, the protective device will...
Page 87 Open and Close Doors Passenger and rear window Safety lock switch Warning (The car is equipped with electric windows on the back door side of the car ） Be cautious when using electric doors and The steps are as follows windows, improper use may cause accidents or injuries! ●Make sure that no one is in the lifting...
Page 88 Open and Close Doors Trunk door Rear windshield Tips During the trunk door on unlocked satuation, Before open the rear windshield, the trunk door Must keep the rear windshield closed during the trunk door can be opened by pulling the should be opened to the maximum position, driving.
Page 89 Open and Close Doors Sidebar Anti-roll Bar Roof cover The roof cover of the car can be disassembled. The specific steps are as follows. Passengers and drivers can step on the sidebar When the vehicle overturns unexpectedly, the when get on the car. anti-roll bar can support the vehicle body.
Page 90 Open and Close Doors Installation steps are contrary to disassembly Bandage Binding Front Door Hole with Sealing Strip steps 2. Push up and remove the roof cover (first move the left cover and then move the right cover). Place the removed cover piece on a soft As shown in the figure, when placing the roof After removing the front top cover, the upper object to prevent to damage.
Page 91 Open and Close Doors Rear top cover The rear roof cover of the car can be disassembled, but it can only be achieved by special tools. If encounter problems in operation, consult the professional staff of the authorised dealership. Detailed disassembly steps are as follows: 2.
Page 92 Open and Close Doors Lift the roof up slightly and move to back. 5. Unplug the right side of the rear panel - 4. Remove bolts (left and right) above column B B-and Rubber tube - A - (illustrated position). as shown in Figure Tips This operation may require a lot of help.
Page 93 Open and Close Doors Installation can be done in the reverse order of Front windshield overturned Warning disassembly. When installing, it should be noted Apart from the removable roof cover, the front that the rear cover should be level with the car Therefore, we strongly recommend that you windshield can also be rolled forward on the body (or slightly lower than 1 mm).
Page 94 Open and Close Doors Detailed disassembly steps are as follows: 2. First pull out the shade shafts on both sides 1.Remove the roof cover according to the along the direction of arrow A, remove two locking screw-arrow B-, and finally remove two previous description ，...
Page 95 Open and Close Doors 5. Release the A-pillar speaker plug 6. Loosen the antenna plug of the front windshield, which is located in the dashboard on the passenger side. 4. Remove the beam interior panel above the windshield as shown in the figure. -1- First remove the A-pillar trim on both sides, and then release the icon plug (take the right side of Caution...
Page 96 Open and Close Doors 8. Remove wiper arm Find the antenna plug of the front windshield 7. Remove the fastening bolts connecting the and loosen it according to the graphic method Open the wiper arm nut cover along the arrow B front windshield with the left and right anti-roll (the plug is inside the glove box).
Page 97 Open and Close Doors Caution The length of these screw is not exactly the same. The screw in the figure-A-position is slightly shorter than that figure-B-position. It should not be confused in installation. In addition, the screw has a torque requirement of 20 + 2NM during installation.
Page 98 Open and Close Doors 11. Remove B-pillar trim panel. 2 10. In the direction of the arrow as shown in the Unscrew the retaining bolts of the seat belt figure, slowly put the front windshield down height adjuster and then remove the seat belt To do so, it is necessary to first remove the seat and firmly fasten the front windshield to the height adjuster (the picture here takes the right...
Page 99 Open and Close Doors 13. Before driving the vehicle, be sure to reset the seat belts on both sides by taking steps which are the opposite of the steps described in Item 11 above. The front windshield folding down operation is now at an end. Loosen the expansion screws in the position 12.
Page 100 During this period, if the A/C and the air to contact an authorized BAIC dealership for replacement cycle. If it is found that the air flow volume adjustment knob are in ON mode, the checks. emitting from the outlets is not as smooth as...
Page 101 A/C System A/C Control Panel 9. A/C switch Tips 10.Right temp. Knob ● When the exterior temperature and When DUAL button isn’t operated, manually operate this button, you may adjust driver and humidity are both very high, the moisture in passenger side outlet air temperature.
Page 102 A/C System Front defrost mode: under max cooling, heating the left temperature knob can be operated When the temperature is higher than 31.5 ℃ , HI state, no exit front defrost mode while operating without operating other switches, and the air is appeared, max heating mode is started, knob, blowing...
Page 103 A/C System before defrosting switch, the original air volume When the knob is operated clockwise, the air Caution is maintained). The defrosting working state volume of the air conditioner increases until the In order to avoid misoperation, the air before defrosting is displayed synchronously in maximum air volume is no longer changed.
Page 104 A/C System Press down the automatic running key(AUTO), Rotate the knob in clockwise direction, the Caution and the air conditioning system will enter temperature will go up. When the temperature is Rear defroster function is only worked while automatic running mode. The key indicator light higher than 32 ℃...
Page 105 A/C System This key is used to switch over between the Interior heating Fast cooling single zone mode and the dual zone mode. The For maximum refrigeration, all windows must 1. Turn the left\right temp. knob to above 24 ℃ . system is in the single zone mode by default.
Page 106 A/C System A/C Maintenance A/C Filter Caution The A/C system is fully sealed. The main The A/C filter (as a standard configuration for ●Park the vehicle in a cool place as much as maintenance work of the system should only be vehicles equipped with an A/C) is located inside possible.
Page 107 A/C System A/C Outlets Central Air outlets Driver Side Air outlets The A/C system of this vehicle has a total of 4 outlets 1. Side outlets There are 2 side outlets, one each on the left and right side of the instrument panel. 2.
Page 108 A/C System Front Passenger outlets Rear outlets Rear Left outlets The driver's side outlets is adjusted in the same Rear left outlets for foot To adjust the direction of the air flow of the way as the central outlets. outlets, turn the convex tongue at the center of the outlets upwards and downwards and left and right.
Page 109 A/C System Rear Right outlets Outlets Switch Rear right outlets for foot Outlets switch makes open or close of vent door, the vent door is closed in clockwise direction to the end position, the vent door is closed in opened in anticlockwise direction to the end position.
Page 110 However, if water condenses inside the headlights, please take the vehicle to an As shown in the figure, when the vehicle light authorized BAIC dealership to have it control knob is turned to the “OFF” position-3-, checked. it indicates that all the vehicle lights are switched off and none are lit (except the hazard warning lights).
Page 111 Vehicle Lights and Vision Low/High Beam Light Switchover Turn signal lights indicate that you want to change your driving lane. When the operating lever is released, the When the headlight low beam is turned on, push turn signal light will go out. the left multi-functional operating lever in the opposite direction to the steering wheel.
Page 112 Vehicle Lights and Vision Manual Adjustment of Headlight Use the following road surface conditions as High Beam Delay references and adjust the lighting height of the Height The high beam delay function will provide you headlights by turn the rolling wheel upwards with lighting via the headlights after you leave and downwards: the vehicle.
Page 113 Vehicle Lights and Vision Hazard Warning Light 3.There is emergency congestion. Interior Lights 4. When the vehicle tows another vehicle or is Reading light towed by another vehicle. After the hazard warning light is switched on, all the turn signal lights will flash at the same time.
Page 114 Vehicle Lights and Vision ON: Regardless of the state of the vehicle doors, Windshield Wiper Tips Tips the reading light can belt. The front windshield wiper If the ignition key is in the LOCK position or Backlight Brightness Adjustment The control part of the front windshield wipers in pulled-out mode, the power leakage is a function contained in the rear right protection function will be turned on: The...
Page 115 Vehicle Lights and Vision Intermittent wiping and continuous wiping When the washing and wiping cycle ends, if the Caution In the “OFF” position, press the right wiper control lever is in any position other than multi-functional operating lever downwards by “OFF”, then the wipers will continue to execute ●It is prohibited to use the wipers when the the corresponding mode after completing the...
Page 116 Vehicle Lights and Vision Rear Windshield Wiper 2. OFF Rearview Mirror In this position, the rear windshield wiper will Interior Rearview Mirror be switched off. This vehicle is equipped with a manual 3. Intermittent wiping by rear wiper dimming interior rearview mirror. In this position, the rear windshield wiper will Be sure to keep the surface of the interior execute the intermittent wiping action.
Page 117 Vehicle Lights and Vision There are two positions for the manual interior Exterior Rearview Mirror Warning anti-glare rearview mirror, which are day and This vehicle is equipped with an electronic night positions. exterior rearview mirror, which has the electric ●In order to ensure the normal function of adjustment and electronic folding functions.
Page 118 Vehicle Lights and Vision The inside rearview mirror can display an image Outside rear view mirrors Rotate the adjustment knob to the left to The car is equipped with an electric exterior indicate that the left Outside rear view mirrorsis of the mirror camera.
Page 119 Vehicle Lights and Vision Outside rear view mirrors for electric folding Tips ●If the ignition key is in the LOCK position or in pulled-out mode, the power leakage protection function will be turned on: The fog lights, the headlights and the reading light will be turned off after approximately 8 minutes.
Page 120 Vehicle Lights and Vision Manual rear view mirror folding * Sun visor with makeup mirror electronic identification microwave window Pushing the Outside rear view mirrors forward The sun visor on the driver's and passenger's or backward allows the Outside rear view side can be pulled out of the respective brackets The microwave window is used to install the mirrors to be unfolded or folded.
Page 121 Seat and storage facilities Seat and storage facilities Warning Warning The importance of correct seats Incorrect seating posture of the driver and ●The seat can only be adjusted while the passenger can cause serious injury adjustment vehicle is stationary. If the seat is adjusted All drivers and passengers must sit in their while the vehicle is running, it can easily lead Properly adjusting the seat ensures that the seat...
Page 122 Seat and storage facilities Headrest Adjust the front seat headrest Warning Correct adjustment of the headrest is essential to ●If the headrest is removed or the headrest protect the occupants and reduce accident and injury rates. is adjusted/improperly installed, it is very easy to seriously injure the occupant in the event of an accident.
Page 123 Seat and storage facilities 3. Front and rear adjustment of the headrest: 2. Grasp the sides of the headrest and press the Seat The occupant sits on the seat, grab both sides of adjustment button in the direction of – arrow C Front seat the headrest at the same time, adjust the –...
Page 124 Seat and storage facilities Front passenger seat Front seat heating * ●Slightly tilt the seat back back. Although the vehicle design is different, for most Warning drivers, even if the driver's seat is moved to front passenger airbag also the front position, the seat back can be tilted considerable pressure when it is opened, so slightly back to a distance of 25 cm.
Page 125 Seat and storage facilities Front seat electric adjustment* The driver's seat has a 6-way electric adjustable function and the front passenger seat has a 4-way electric adjustable function. Coupon seat electric adjustment: Electric waist support (such as equipment): Push the front and rear switch -1- to adjust the The electric waist control button -1- is located front and rear movement of the seat position.
Page 126 Seat and storage facilities Front seat manual adjustment * The driver's seat has a 6-way adjustable function and the front passenger's seat has a 4-way adjustable function. Seat height adjustment (only for driver seat): Seat back adjustment: Press the height adjustment handle down and The backrests of the two seats in the front row down -3-, the seat surface will move downwards;...
Page 127 Seat and storage facilities Caution Caution ● After adjusting the seat position, try ●The seat position set by the manufacturer: sliding the seat back and forth to ensure that the front and rear adjustment stroke is the seat is locked in place. 240mm, the seat design position can be adjusted forward...
Page 128 Seat and storage facilities Rear seat Fold the seat back to full contact with the seat cushion Rear seat folding This car is equipped with a rear 4/6 split seat. If Tips you need to place large items in the rear seat, Before folding the rear seats, it is necessary you can fold and flip the back seat back.
Page 129 Seat and storage facilities Then turn the seat up and forward to the Caution Warning extreme position to reverse the rear seat. When the vehicle is moving, the rear seat that When the one seat is double-turned, the seat belt ●It is very dangerous to ride in the baggage needs to be carefully turned up is down.
Page 130 Seat and storage facilities Storage facility Cup holder Caution Storage facility Front passenger side glove ●When storing liquid in the glove box, only tightly closed or unopened containers can be stored. Spilled liquid can damage the decorations and electrical components inside the glove box and dashboard.
Page 131 Seat and storage facilities Front central armrest storage box Small storage box Front row integrated power outlet (cigarette lighter / 12V power supply) As shown in the figure, press the switch -1- near The storage box (arrow position shown) is The cigarette lighter (the position of the arrow the front passenger side and lift the storage located next to the cigarette lighter and can store...
Page 132 The weight of the load shall not exceed 0.6kg, the cigarette lighter as much as possible. Do not switch between the cigarette lighter and the more than 120W. Please consult BAIC Special and the diameter of the round object shall not power socket function frequently.
Page 133 2. Use a plug that matches the power outlet to avoid damaging the outlet; 3. Please use only accessories approved by BAIC; 4. LED indicator Light Green When the 220V power supply is in normal working condition, the red light flashes 220V and the power supply is in an abnormal state.
Page 134 B-pillars and other modified vehicles may affect the handling BAIC Auto will seriously impair the handling components are affixed with data labels and stability and other performance of the vehicle stability and reliability of the vehicle.
Page 135 Parts and modification Warning Warning Improper modification or improper ● Modifications to the front of the vehicle ● installation of the vehicle can easily lead to and the engine compartment may deteriorate malfunctions accidents. the pedestrian protection of the vehicle and recommended to always use the accessories violate road driving regulations.
Page 136: Table Of Contents
3. Driving guide Start and drive .....................135 Transmission system ..................145 Braking System ....................146 Parking assist system ...................160 Driving skills .....................164...
Page 137: Start And Drive
Start and drive ● When the button is pressed for the first time: Start and drive Tips the “ RUN ” mode is turned on, the meter is lit, ● Automatic transmission model: The shift and all the powered devices such as the display Start/stop button lever is in the P or N position and the brake are in the on state;...
Page 138 Start and drive Electrical anti-theft function Smart key standby starting function Emergency stop function Electronic anti-theft function is used to prevent If the vehicle is in a strong signal interference Emergency shutdown mode can be used when others from illegally stealing vehicles.The area, or the battery of the intelligent remote normal mode fails to shut down the engine.Step transceiver chip in the remote key is equipped...
Page 139 Start and drive Automatic transmission model: Caution Warning Press the brake pedal to the bottom and hold it; When starting a cold engine, it takes several Put the shift lever in the position of P or N; ●Do not start or run the engine in a poorly seconds for the oil to reach the normal Press the start/stop button to start the engine ventilated place or enclosed room.Because...
Page 140 Start and drive Shut down the engine MT * Caution Stop the car, apply parking brake, put the shift ● Don't try to start the engine when the lever in neutral, automatic transmission should transmission is in gear, because the car may be placed in P, release the brake pedal or clutch move.
Page 141 Start and drive Vehicle speed recommend Corrective operation for MT When the vehicle is running or the engine is idling, do not put your foot on the clutch pedal, Shift with gentle force, avoid excessive force, speed （ km/h ） gear lest the clutch overheat or even damage.
Page 142 Start and drive Reverse gear Driving instruction ● The automatic shift control mechanism has a P lock structure, which means that the gear can When the engine is running, the clutch pedal AT* gear instruction only be moved from P when the brake pedal is should be pressed to the end before hanging the pressed down and the vehicle is powered up or reverse gear, pause for a moment and then put...
Page 143 Start and drive "M" (manual) : ●Put the shifter lever in its other gear from Caution ● When shifting the shift lever from "D" to "M", "N", leaving the engine idling. ●According to the change of resistance (such the transmission will enter the M gear mode, ●When driving in manual mode, the vehicle as traction, climbing a long slope, etc.), the and the dashboard will display the current actual...
Page 144 Start and drive Shift gear display * ● Always apply parking brake until you are Warning ready to drive away. Remember that once you models equipped with automatic have selected the driving gear, the automatic ●The driver must carry the remote control transmissions, the shift position display in the gear will slow forward or backward.
Page 145 Start and drive Reverse Electric transfer Case Caution 1. Park the vehicle steadily ●Do not put the vehicle into "P" or "R", 2. Press the brake pedal and put the shift lever into the "R" position otherwise the transmission will be seriously 3.
Page 146 Start and drive 4L: four-wheel drive, low-gear, four-wheel Warning drive, can be used for a short time on off-road roads requiring low speed and high traction. It is ● if the transfer gear is not fully engaged, it not allowed to be used on dry or paved roads. may cause damage to the transfer or the Switch gear vehicle loses power and control, resulting in...
Page 147: Transmission System
Transmission System Transmission System The following will cause transmission parts Caution failure, When entering the off-road zone, drive General descriptions 1. Depress the brake pedal and accelerator pedal slowly and do not exceed 25km/h. at the same time, and lift the clutch. Improper operation of the driver on off-road Avoid sudden acceleration, to prevent the 2.
Page 148 Brake system Brake system At this point, the foot should be removed from Vehicles will also travel 20 meters, too far in an the accelerator pedal and should be shifted to a emergency.So it's important to have a good lower gear to use the engine to assist braking. distance from other cars.
Page 149 Brake system If the engine flameout in the road, should take Influence factor for braking effect In rainy days and wet slippery road driving, the normal brake but do not use the inching should control the speed, prevent skidding; In 1.
Page 150: Braking System
Brake system In the use of engine braking, the lower the 4. Snow and ice 6. Braking system failure Due to the low friction coefficient of snow & If you find that the braking distance suddenly transmission gear, the higher the engine speed, the greater the drag force, the more obvious the ice covered surface, the braking distance will be becomes longer or the brake pedal travel...
Page 151 Brake system The brake pedal Brake system status and brake Warning Do not place thick MATS or other foreign system failure Do not drive a vehicle with worn brake pads, objects near the brake pedal. This will affect the Warning lights which can make braking difficult and may travel of the brake pedal in an emergency.
Page 152 Brake system Electric parking brake (EPB) when the start/stop button is placed in "OFF" mode, the vehicle will park automatically, and then the red parking light on Apply Secondary electronic parking: In some special cases, the second clamping of brake calipers can be realized by putting the start/stop button in "RUN"...
Page 153 Brake system Caution Caution Caution ● if the brake pedal is not pressed, push ● when transfer box is at 4L, transmission ● When the start/stop button is in the down the electronic parking switch, the is on D /R transmission; if EPB is used for a "OFF"...
Page 154 Brake system Automatic release of electronic parking: ABS anti-lock brake system ABS working mode First make sure the doors are closed and fasten Anti-lock braking system (ABS) can prevent the When the vehicle speed reaches about 20km/h, the seat belt well.Shift from P or N to D or R, wheel from locking when the vehicle is braking, an automatic detection process is started.You step on the accelerator, and the electronic...
Page 155 Brake system Before the vehicle stops or danger situation ends, ABS warning lights Warning must not loosen the brake pedal! The brake ABS integrates a monitoring system to check all pedal cannot be repeatedly pressed, which will After the failure of ABS system, the normal system related electrical components in real stop ABS work and may increase the braking braking system will still work and will not be...
Page 156 Brake system ABS system daily maintenance electronic braking force ● high water content of brake fluid will not only cause bad braking due to evaporation of ABS system is composed of mechatronic distribution system water, and may corrosion of the braking system, components, with high reliability, usually Automatically adjust...
Page 157 Brake system ESP electronic stability system * ESP improves control of the vehicle at its The ESP indicator dynamic limits, such as acceleration and corners. When the start/stop button is located in the ESP can effectively reduce the risk of sideslip. It can reduce the risk of sideslip in all road "ON"...
Page 158 Brake system ESP OFF Function Transfer case 4H/4L: ESP OFF indicator light Caution is automatically on, indicating that the ESP ● Transfer case 4H/4L,Press ESP OFF system is in partial functional state, including ABS, EBD, TCS, HHC, HBA and HDC. Hill button fleetly＜...
Page 159 Brake system Traction Control System (TCS) * Hydraulic Brake Assist (HBA)* Hill-start Hold Control (HHC)* TCS can prevent the driving wheel from The brake assist system is for purpose of brake In case of grade more than 4°, either to continue slipping during acceleration.
Page 160 Brake system Hill Descent Control (HDC)* 3. When the driver increases the speed of the Autohold vehicle to more than 35km/h through the HDC enables driving at constant speed during The auto hold function can help driver to take accelerator pedal, HDC exits and is on standby; driving downhill.
Page 161 Brake system 2. The accelerator pedal is depressed during Autohold Function Auto Exit take off, AUTOHOLD function is automatically When the AUTOHOLD function is active, Put it removed, and the parking indicator lamp on the in D or R, the accelerator pedal is depressed, AUTOHOLD auto exit, the vehicle will takeoff.
Page 162: Parking Assist System
Parking Assist System Parking Assist System Display Signal Left, center and right sensors are composed of Explanatory Notes on the Parking four layers set of indicators that shows the status of obstacles.Each group of display bars Assist System independently displays the information of Four sensors for the reversing radar system measured obstacles ，...
Page 163 Parking Assist System Detection Range Reversing Rearview System* Warning The detection range of the sensor is limited to General Instructions ● While reversing, pay particular attention the vicinity of the rear bumper. Be sure to The reversing rearview camera on the rear determine the safe distance around the vehicle to those obstacles which are higher or lower bumpers can assist the driver in reversing or...
Page 164 Parking Assist System System Start Reversing radar system image will System Exit When the vehicle is at R gear, the reverse superposed and displayed in the reversing In the following two cases, the reversing rearview system will be automatically started, rearview image, and for details, refer to rearview system exits: and reverse rearview interface is shown on the...
Page 165 (especially children) and small animals are beyond its reach. detected at an authorized BAIC dealership. in the operating area. During reversing, don ’ t Keep the camera clean and free of ice so that it ●...
Page 166: Driving Skills
Driving Skills Driving Skills A vehicle equipped with a limited slip Preparations Before Driving differential rear axle assembly should be driven It is best to carry out safety checks before more slowly over bends than a vehicle with an Driving Tips driving.
Page 167 Driving Skills Before Starting the Engine Move the front passenger’s seat backwards as After Starting the Engine much as possible. Tire: check tire pressure and whether the tires Fuel leakage: After the vehicle has parked for a Ensure that babies and children are properly have cuts, damage or excessive wear.
Page 168 Driving Skills Driving During Run-In Period Wear in the Engine In the early period of wearing in, the inner A new engine must undergo a wearing-in of frictional resistance of the engine is much To ensure the service life of the vehicle, a run-in 1500km.
Page 169 ● Do NOT use the brake fluid for too long. safely, you need to park the vehicle on the road Be sure to replace the brake fluid by the side and contact an authorized BAIC dealership specified cycle. for assistance.
Page 170 Driving Skills Driving During Rain Warning Warning When driving on slippery roads ● Before driving, ensure that the parking ●When driving on slippery road, emergency ● When there is rain, please drive carefully brake has been fully released. braking, acceleration and steering may cause because the visibility is low, the vehicle the tires to skid.
Page 171 Driving Skills Driving in Water While driving in water, besides maintaining low Running Water speed, try to avoid stopping the vehicle or If the water is running and the water level is Although your vehicle can drive in shallow shifting the gear. rising (for example during rainstorm), avoid water, the following precautions shall be taken crossing the water, but continue to drive after...
Page 172 Drive off at low speed. This will give a appear to be milky or foamed) as soon as an authorized BAIC dealership for help. sufficient time for the lubrication oil of the Check Engine Coolant possible to avoid damage to components.
Page 173 ● While driving, avoid collisions with curbs. Be ● Wheels must be positioned accurately. If This product is sold at all authorized BAIC sure to lower vehicle speed when driving on they aren ’ t, this will cause overly fast wear of dealerships.
Page 174 Driving Skills Fuel Economy ● Perform regular maintenance in accordance Fuel economy is related to many factors. with the maintenance requirements. Personal driving habits have a major impact on ● When the vehicle has stopped at a signal fuel consumption. The recommendations below light or a stop sign and needs to be restarted, be will help to achieve the best fuel economy: sure to accelerate slowly at an even speed.
Page 175 4 Maintenance and Service Safety maintenance ....................174 Fuel system ......................177 Interior maintenance ....................180 Exterior maintenance ...................183 Engine compartment ....................190 Engine oil ......................194 Coolant ........................198 Brake fluid ......................202 Power steering fluid .....................205 Battery .........................207 Windshield washing liquid and wiper blade ............211 Tire ........................214...
Page 176 Safety and Maintenance Caution Safety and Maintenance Warning Only some important safety precautions are Incorrect vehicle maintenance or driving Service items not mentioned in this chapter listed in this section. We are unable to list all problematic vehicles may cause traffic should all be performed by accredited or other of the dangers which you may come across accidents, serious injury or even death.
Page 177 After each engine replacement inspection, be sure to ask the authorized BAIC dealership to sign and seal the maintenance record page.
Page 178 For 3. When the engine is running or the start/stop details, please contact the authorized BAIC button is turned on, do NOT touch the electrical dealership wires or electrical parts.
Page 179: Fuel System
Fuel System Fuel System Adding Fuel Before adding fuel, please turn off the engine first. Then, follow the steps below: 2. Refueling door will open, then remove the cap and start adding fuel. The fuel filler is located on the left rear wall 3.
Page 180 Fuel System Caution Warning As long as you follow the above instructions ●When refueling, must not smoke. There for refueling, after the second automatic stop should be no spark or open flame.。 of the refueling gun, the tank is "full" and no ●When you open the fuel tank cap, do not further refueling is required, otherwise the remove it immediately.
Page 181 Fuel System Fuel Use the specific gasoline to ensure the performance (see technical data section for details) Using low-rating or poor quality gasoline can lead to engine damage Caution If the gasoline octane rating (RON) used in an emergency is lower than engine required. The engine can only run at medium speed and low load.
Page 182: Interior Maintenance
● Avoid exposing your vehicle to strong authorized BAIC dealership to get it sunlight for a long period of time so as to repaired. prevent the leather or similar items of the vehicle from fading.
Page 183 ●Regularly check the state of the seat belt. If damage is found in the seat belt fabric, seat belt connection, automatic retracting device or the seat belt lock, be sure to go to an authorized BAIC dealership to get it repaired.
Page 184 In the event of damage to the backing tapes, connection devices, retracting mechanisms or the lock catches of the seat belts, be sure to go to an authorized BAIC dealership to have them repaired or replaced.
Page 185: Exterior Maintenance
Exterior Maintenance Exterior Maintenance Washing vehicle Caution Frequent vehicle washing helps maintain the ●It is suggested that new vehicles can only appearance of the vehicle. Caution be waxed after six months of use. The vehicle should be washed in a cool place. ●When the brake is wet or icy, it may affect ●Do NOT wax vehicle windows.
Page 186 4. Wheels and the footstep should be washed be sure to go to an authorized BAIC used. If the body paint has no gloss or has last. During the cleaning, be sure to change the dealership to have it repaired.
Page 187 Exterior Maintenance Waxing Warning Warning Regularly waxing can protect the body paint and ●If there is water, ice or anti-skid salt inside ●Before use, be sure that you have carefully keep the vehicle body clean. the braking system, it will make the brake read and followed the relevant information Only after the whole vehicle is wiped dry can slow to react and increase braking distance,...
Page 188 Caution spread over it. All such work must be done at an parts cleaned using chrome authorized BAIC dealership. Lusterless parts and plastics cannot be maintenance agent. Regularly using a chrome Cleaning Maintenance treated with polishing agents or hard wax.
Page 189 Exterior Maintenance Cleaning of Window Glass and After the body surface has been maintained, the Cleaning Front Windshield wax that remains on the glass should be cleaned Rearview Mirror Wiper Blade off using a special cleaning agent and a cleaning Clean window glass and rearview mirror with cloth so as to prevent scratching the wiper alcohol-based glass cleaner, then dry the glass...
Page 190 Exterior Maintenance Maintenance of Sealing Strip Cleaning Maintenance Caution Frequent maintenance to these doors’ or Wheels ● Replace damaged wiper blade windows’ rubber sealing strip can keep its in Regular maintenance will keep the wheels promptly. good flexibility, good sealing and also can pleasing to the eye.
Page 191 Reparation should be done if protective layer must be remedied in a timely pipes. Do NOT remove the insulation panel. necessary. Authorized BAIC dealerships can manner. Anti-Corrosive Treatment provide suitable repair services.
Page 192 Engine Compartment Engine Compartment Warning Warning Safety Instructions of work at ● If any observable steam or coolant ● If any observable steam or coolant overflowing from the engine compartment, overflowing from the engine compartment, Engine Compartment be sure to NOT open the engine hood. be sure to NOT open the engine hood.
Page 193 Engine Compartment Opening/Closing Engine Hood Lightly lift the engine hood, press the Level-2 Prop up the support rod of the engine hood unlocking handle upwards with your fingers, which is located in the front part of the hood, and raise the engine hood. and insert its upper end into the designated Park the vehicle properly, apply the parking position of the compartment hood to ensure that...
Page 194: Engine Compartment
Engine Compartment Warning It’s not allowed to drive if the engine hood is not tightly closed To close the engine hood, remove the support rod and put it back to the bracket in the front part of the engine compartment. Lower the engine hood to a position close to the fender and then release the engine hood.
Page 195 Engine Compartment Engine compartment layout 1. Battery 2. Coolant reservoir 3. Brake fluid reservoir 4. Power steering fluid reservoir 5. Windshield washing liquid reservoir 6. Fuse box (under the covering panel) Caution Before the engine hood is opened to the full extent, make sure to remove the washer pipeline from the clip to prevent the pipeline from being broken.
Page 196: Engine Oil
Should the engine oil flow back to oil pan. contact the authorized BAIC dealership as soon If it is in a cold state, engine oil level can be as possible to have the system checked and checked directly.
Page 197 Engine Oil A certain amount of engine oil will be normally consumed during drive, the amount of engine oil consumed will depend on driving habit and vehicle running condition. Therefore, it is necessary to regularly check the engine oil level. It is recommended to check the engine oil level before each time charging fuel or before a long journey.
Page 198 Engine Oil Adding Engine Oil 5. Once the oil level approaches the upper limit Caution mark, please immediately stop fueling and put Engine oil should be added by a small amount If the engine oil level exceeds the upper limit on and tighten the engine oil filler cover.
Page 199 Replace the engine oil by the cycle which is Do NOT add any additives into the engine oil. ● If you have no relevant professional specified in BAIC’s Warranty Manual. The This may damage the engine. Problems service life of the engine can only be guaranteed...
Page 200: Coolant
Coolant Coolant Caution Warning Role of Coolant Do NOT add into the coolant the coolant of ●The coolant must be stored in a closed Correctly using coolant can play the role of another manufacturer. container. Do NOT let children come into protection against corrosion, cavitations leakage, ●...
Page 201 Wait until no steam or When the ignition key is turned to the “ON” authorized BAIC dealership as soon as possible coolant overflows and then open the engine position, the coolant thermometer will display to have the system checked hood.
Page 202 Coolant Checking Coolant Level and Adding Checking Coolant Level Opening Coolant Expansion Tank Coolant Cover A normal coolant level is vitally important for the engine cooling system to work normally. Before opening the engine hood, be sure to park the vehicle on a flat road. Also be sure to carefully read and follow the relevant warning instructions Tips...
Page 203 If a lot of coolant is consumed, it indicates that the cooling system has a leak. At this time, you should go to an authorized BAIC dealership to have the cooling system checked to prevent it from damaging the...
Page 204: Brake Fluid
If the brake pedal fluid. depression accidentally becomes longer or the ● The brake fluid level should be between the brake fluid level falls markedly, please upper limit mark and the lower limit mark immediately contact an authorized BAIC...
Page 205 Due to the wear of the brake pad, the braking developed by BAIC for the braking system of fluid storage tank is too low. in order to system of the vehicle will automatically adjust this vehicle.
Page 206 If it the system for too long, air resistance will be touching it. Otherwise, they may be poisoned does, immediately go to an authorized BAIC caused inside the pipeline of the system when dealership to have the vehicle checked.
Page 207: Power Steering Fluid
Meanwhile, prevent the power steering fluid from overflowing. Warning It is suggested that an authorized BAIC ●Power steering fluid is corrosive. Please dealership should be asked to add power steering fluid keep the container sealed and put the container out of reach of children.
Page 208 “MAX” mark to ensure that you can drive your vehicle for a short distance to an authorized BAIC dealership to have it checked. If the power steering fluid level is below the MIN mark, you must add steering liquid before starting the engine.
Page 209: Battery
If not absolutely sure, ask ● When charged, batteries will generate an operation will cause serious damage to the an authorized BAIC dealership to carry out the explosive mixed gases. Therefore, batteries batteries fuse box.
Page 210 Battery Checking Battery Power Warning Tips If the vehicle needs to be driven over a long If the monitoring indicator window is ● Before starting battery maintenance, be distance or in a hot region or the battery is used colorless, you may use a screwdriver to for too long, be sure to regularly check battery sure to carefully read and follow the safety lightly tap the monitoring indicator window...
Page 211 In such a situation, it is ● Do NOT charge the battery when it is remove the battery and keep it indoors so as to suggested that you go to an authorized BAIC connected with the vehicle, this may seriously protect it from damage.
Page 212 Once the BAIC’s original batteries can meet the vehicle one hour so as to dispel inflammable gases charger is turned on, no wire can be moved...
Page 213: Windshield Washing Liquid And Wiper Blade
Windshield Washing Liquid and Wiper Blade Windshield Washing Liquid and Replacing Windshield Wiper Blades Warning Wiper Blade Caution When performing maintenance on the engine compartment, be sure to exercise extra care. ●The wiper blade must be kept in good Windshield Washing Liquid and ●Before starting the maintenance, be sure to state.
Page 214 -Arrow- direction Pull up the wiper arm, follow the direction of – incorrect. Please to go to an authorized BAIC Arrow A- and turn the wiper blade to the dealership to have the positioning angle checked position as shown in the figure and adjusted.
Page 215 Windshield Washing Liquid and Wiper Blade Replacing Rear Wiper Blade Warning While driving, be sure to clean all vehicle window glass to maintain good vision! ●Regularly clean the wiper blade and all vehicle window glass. ●The wiper blade should be replaced once or twice a year.
Page 216 Tires Tires Storage Instructions for Tires Tire Pressure Before removing tires, be sure to mark them The correct tire pressure can prolong the service Defective tires are very dangerous! If tires are indicating their turning direction. When life of tires. It can also ensure the best damaged, excessively worn, or have improper installing the tires, follow the marks to combination of driving comfort, fuel economy...
Page 217 Tires The pressure of hot tires is bound to increase. If How to Check Tire Pressure? Tire Puncturing tire pressure has to be checked when the tires Besides the tire pressure monitoring system, tire Your vehicle is equipped with treadless tires. are hot (after the vehicle has been driven for a pressure can also be checked with high-quality When the tires are punctured by a sharp object,...
Page 218 BAIC dealership to have the tire checked as ● While driving, spot ●...
Page 219 Tires Valve Hole Tire Check and Rotation Keep the valve hole cap tightly screwed to It is suggested that tires should be rotated every prevent dust from entering the valve hole. While 12,000km driven, or more frequently based on checking tire pressure, check whether the valve needs.
Page 220 Tips If the tires are worn unevenly (only on one Rusting or dirt on the wheels or wheel side) or excessively, ask an authorized BAIC connectors will cause the loosening of the dealership to align the wheels. wheel nuts after a certain period of time,...
Page 221 Tires Tire Information Buy New Tires Warning Mixed use of tires will make the vehicle run out of control while driving. If you mix tires of different dimensions or models (radial tires and bias-belted tires), it will not be possible to steer the vehicle normally, thus causing accidents.
Page 222 If excessive uneven tire wear is found, miles it has been driven. Such rims may be sure to go to an authorized BAIC dealership suddenly break down and cause an accident. to have the wheels aligned.
Page 223 Tire Snow chains Puncturing Do NOT install any snow chain which is not consented by BAIC. Otherwise, it may damage Tire puncturing is not often seen while driving. the brake parts. This is particularly true when the tires are Unsuitable snow chains will damage the tires, properly maintained.
Page 224 5 Handling of Accidents Warning Triangles and Fire Extinguisher ............223 Spare Tires and Tools ..................224 Replacement of fuse ....................232 Replacement of bulb ....................242 Emergency start ....................242 Emergency traction ....................244...
Page 225 Warning Triangles and Extinguisher Caution Warning Triangles and Please according to the national relevant laws Extinguisher regulations, correct warning Triangle. Warning Triangles The warning triangles should be placed behind the vehicle driving direction in accordance with the relevant State regulations. When placing a warning triangle on an ordinary highway in day time, put it in a place which is about 50-100m away in the direction of coming vehicles.
Page 226 Spare Tires and Tools Spare Tires and Tools Spare Tire 3. Follow the right angle to insert the wheel lock 2. Pull out the hub cap of the spare wheel in the key into the wheel lock nut and turn the wheel axial direction.
Page 227 Spare Tires and Tools Tools Warning ● Do NOT use damaged spare wheels or spare wheels which have been worn to the maximum limit. ●Spare tires which are more than six years old can only be used under emergency situations, and the vehicle must be driven carefully.
Page 228 Spare Tires and Tools Caution Warning After use, the jack must be put back to its ●Improper use of the jack may cause serious original place. Also pay attention to the injuries. supporting angle of the jack and ensure that ●The jack can only be used on a hard and the jack can be put into the installation box.
Page 229 Spare Tires and Tools Replacement of Flat Tires Warning The dimensions of the emergency spare tires There are risks when tires are replaced. The and their rims of this vehicle are the same as vehicle may slide off the jack, tip over or fall those of the damaged wheels.
Page 230 Spare Tires and Tools Loosening Wheel Nuts Lifting Vehicle Tips Before lifting vehicle using jack, only loosen the wheel nuts by one turn. ●The wheel assembly wrench provided with the vehicle may be used to do the loosening. Before jacking the vehicle, be sure to loosen the Put the jack at the right lifting point.
Page 231 Spare Tires and Tools Caution lifting follow-up replacement procedures could only be performed after the nuts of the wheel have been loosened. Warning ●The jack must be used on a hard and flat surface. ●The jack must be put at a suitable lifting point.
Page 232 Spare Tires and Tools Mount Spare Tire When installing the wheel nuts, use your hand Turn the jack handle clockwise to lower the to tighten them first. Then, push the wheel vehicle. Align the installing hole of the spare wheel with backwards to see if it can be tightened a bit Use the wheel assembly wrench to tighten the the installing hole in the brake disc.
Page 233 ● After the wheel is installed, go to an situations, and the vehicle must be driven place. authorized BAIC dealership as soon as carefully. ● After use, the accompanying tools should be possible to have the wheel nut tightening ●After a spare wheel is installed, be sure to...
Page 234 Replacement of Fuse Replacement of Fuse Remove the knee protective panel With knee protective panel Fuse Box 1. Adjust the steering column to the bottom 1. Check to ensure the steering column is adjusted to the bottom position, and the knee position;...
Page 235 If the fault still exists, please contact an authorized BAIC dealership. Pull out the fuse of the electrical device which has stopped working, and check it out.
Page 236 At this time, you should leave the melted fuse in the circuit and contact an authorized BAIC dealership. Caution If you use a spare fuse of a rather low amperage to replace the melted fuse, it may melt again.
Page 237 Replacement of Fuse Specifications and Functions of Horn HFKA Compressor relay Starter relay Reserved Engine Compartment Power —— Reserved Distribution Center Low-speed fan 1 Position Specification Function Low-speed Fan 2 Fuel pump relay A/C compressor Main relay Ignition switch IG PEPS BCM ST Vacuum pump relay TCU IG...
Page 238 Replacement of Fuse Engine Compartment Power Position Specification Function Tips High-speed Fan 1 Distribution Center Layout As shown in the figure, there is a spare fuse High-speed Fan 2 inside engine compartment power High-speed Fan 1 distribution center. If a fuse of your vehicle is High-speed Fan 2 damaged, you may use the spare fuse to replace it.
Page 239 Replacement of Fuse Cabin fuse box Layout Specifications and Function of fuse box in cabin...
Page 240 Replacement of Fuse 37 10A USB/EHC/220V/EHC swtich 20 5A PEPS power 2 Tips 38 15A Cigarette lighter, Electronic mirror/Defroster relay/EPB As shown in the figure, there is a spare fuse 21 10A switch/USB charge plug 39 —— Reserved inside engine compartment power 22 10A...
Page 241 Replacement of Bulbs Replacement of Bulbs Emergency Startup Warning Usually, it is not possible to replace a bulb Absolutely do NOT charge frozen batteries. If discharging makes it impossible to start the without removing other parts of the vehicle. This may cause explosions! Even if unfrozen, engine, you may start it by using the battery of This is particularly true for those bulbs which acids may overflow when the battery is...
Page 242 Emergency Startup Jumper Cables 5.Connect the end -3- of the black cable with Caution negative electrode To connect batteries via jumper cables, it is power-supplying battery “B” and the other end ● Properly arrange the jumper cables to necessary to connect the positive terminals first -.4- with engine...
Page 243 Emergency Towing Towing from the Front Warning Emergency Towing Improper use of the jumper cable may result The front and rear parts of the vehicle are both in battery explosion and thus bring serious equipped with a towing hook which can be used personal injury.
Page 244 Warning If the vehicle needs to be dragged, we suggest ●Inexperienced drivers must NOT attempt that you entrust an authorized BAIC dealership to tow other vehicles so as to prevent or a commercial towing company to do it for accidents.
Page 245 Emergency Towing Towing from front\ Towing from rear Using a Flatbed Truck to Drag the Vehicle Caution Caution Caution Do NOT tow the vehicle from the front when Do NOT tow the vehicle from the rear when its rear wheels are on the ground. When the the front wheels are on the ground.
Page 246 6. Vehicle specifications Identification code ....................245 Vehicle parameter ....................248...
Page 247 Identification Number Identification Number On this vehicle, the vehicle identification number (VIN) is indicated in 5 positions, namely on the vehicle data plate -1-*, on the bottom of the left windshield glass -2-, on the body between the two hinges of the engine hood -3- (only visible when the engine hood is fully opened), on the inside of the tailgate) -4-, and on the beam of the right vehicle -5-.
Page 248 Identification Number Diagnostic tester Engine Transmission & Transfer Part code ： T11200001 case Codes Part name: BAIC Diagnostic system Part code: T19900010 Part name: PAD Diagnostic tester The engine code is imprinted on the engine body. The engine code is pasted on the engine cover.
Page 249 Identification Number Vehicle Data Nameplate The product label is in the middle and lower part of the B-pillar on the front passenger’s side*. The following information can be read from the product label: 1. Vehicle identification number 2. Brand & vehicle model 3.
Page 250 Vehicle Parameters Vehicle Parameters Item Dimension Length (mm) 4645 Width (mm) 1925 Height(mm) 1871 Wheelbase (mm) 2745 Minimum ground clearance (full ≥ 210 load (mm) Front wheel track (mm) 1610 Rear wheel track (mm) 1610 The outside rearview mirrors is not included in the vehicle outside profile size.
Page 251 Vehicle Parameters Main type and parameters Vehicle type BJ2021F7VA3B BJ2022F7VM3B Engine type B231R B201R driving type The vehicle production emission Euro Ⅴ Euro Ⅴ Length (mm) 4645 4645 Width (mm) 1925 1925 Height (mm) 1871 1871 Wheelbase (mm) 2745 2745 Front wheel thread (mm) 1610 1610...
Page 252 Vehicle Parameters Structural Parameters The Braking System 12.5 Brake pedal’s free stroke (mm) 10~20 Minimum turning diameter （ m ） Clutch pedal’s free stroke (mm) 10~20 Approach angle （°） ≥ 37 limit of front brake pad (not Departure angle （°） ≥...
Page 253 Vehicle Parameters Engine Parameters Consumption and filling amount B201R （ 2.0T ） B231R （ 2.3T ） reference quantity(L) Type Model More than 92# Inline four-cylinder, Inline four-cylinder, Type and category gasoline (2.0Tengine); turbocharger, DOHC turbocharger, DOHC Fuel tank capacity More than 95# Emission standard Euro V EuroV...
Page 254 Vehicle Parameters Light Bulbs Name Model Specification Front combination lights （ Low and high — light 、 Position light 、 Turn signal light) Rear combination lights （ Position lighti 、 Brake light 、 Reverse light 、 Turn signal — light ） High brake light —...

BAIC BJ 2022 Series Manual

3. Driving Guide

4 Maintenance and Service

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for BAIC BJ 2022 Series

Summary of Contents for BAIC BJ 2022 Series

Table of Contents