Digital Home Theater Audio - Russound SMC-30 Installation Manual

Digital Home Theater Audio

You can connect the SMC to a digital home theater system via an optical digital
audio cable�
Note: Do not connect analog multi-channel speaker outputs if you connect the
digital output�
Insert optical cords until they click into place� Do
not bend or tie optical cords�
To connect digital audio from the SMC to an A/V
receiver with an optical audio input:
1� Connect an optical audio cable from the
Optical S/PDIF connector on the SMC's rear
panel to the digital input (SPDIF) on an A/V
receiver or digital audio system�
2� Select the A/V receiver input�
3� Use the A/V receiver to adjust the volume�
Optical Cable to A/V
Receiver Optical INPUT
Digital Home Theater Audio Connection
Smart Media Console Installation Manual
SMC Digital Powered
Speakers and Digital Home
Theater Audio Connection
41