Advertisement
Safety Precautions
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched, particularly at plugs, convenience recepta-
cles, and the point where it exits from the apparatus.
11.Use only attachments or accessories specified by
the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart-apparatus combination to avoid
injury from tip-over.
13.Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, or the appara-
tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
If you have any questions, call Russound at
800.638.8055 or 603.659.5170.
Connection for RNET Control of Source
iPod
BGD1 iBridge Dock
Power Supply
Connection for IR Control of Source
iPod
BGD1 iBridge Dock
Power Supply
RNET Multiroom Controller
RCA Patch Cable
RJ-45 Patch Cable
CAT-5 Cable
up to 300 feet (90 m)
RJ-45 Wall Plates (optional)
Power Supply
CAS44 Multiroom Controller
RCA Patch Cable
RNET A/V
Decoder
IR Link Cable
CAT-5 Cable
up to 300 ft (90 m)
Power Supply
RJ-45 Wall Plates (optional)
Front and Rear Panels
RNET A/V
Decoder
2
3
4
1
RNET A/V PORT – For connection to BGD1 iBridge
Dock or other RNET A/V source input device
AUDIO-VIDEO OUTPUTS – For connection to multi-
2
room system source inputs
IR INPUT – For connection to IR output on multiroom
3
system to support IR control of remote source
4
POWER INPUT – For connecting included 12 VDC
1 A power supply
5
RNET LINK PORTS – For control and feedback
connection to RNET system
Note: When using the RAVD1 for RNET control of
the source, do not connect anything to the IR input.
Doing so will disable RNET for the entire system.
1
5
Hide quick links:
Advertisement
