Related Manuals for BEHR CF6
Summarization of Contents
Setting Up and Connecting
Cooling-water connections
Instructions for connecting the water supply and drainage for the unit's cooling system.
Routine Procedures
Taking Out and Inserting the Crucibles
Step-by-step guide for safely handling crucibles within the device and snapper.
Programming the CF 2+2 / CF 6
The Operating Control Unit
Overview of the single-knob interface for programming and operating the apparatus.
Adapting the Apparatus
Choosing the Language
Guide to selecting the display language for the apparatus interface.
Configuring the Level Sensor
Instructions on how to enable or disable the waste container level sensor.
Setting the Time
Procedure for setting the current time on the apparatus.
Working with the CF 2+2 / CF 6
Preparing the Crucibles
Detailed steps for preparing filter crucibles with filter aid before sample loading.
Weighing the Samples In
Guidance on adding the correct amount of sample material to the prepared crucibles.
Acid Digestion Procedure
Blowing Frits and Rinsing
Actions for clearing frits and performing rinsing cycles after digestion.
Modifying Programs
Preheat Settings
Adjusting preheating power and time for custom programs.
Rinse, Ventilate, Suction Settings
Configuring parameters for rinsing, aeration, and suction cycles in programs.
Dose Heating Setting
Setting the IR radiator power during reagent addition in custom programs.
Maintenance and Care
Solvent Containers
Guidelines for handling and disposing of used solvent containers.
Peristaltic Pumps
Maintenance and replacement procedures for the peristaltic pump hoses.
Changing the Pump Head
Steps for replacing the pump head assembly.
Condenser and Gasket Maintenance
Instructions for removing and maintaining condensers and their seals.
Sealing Ring Inspection
Checking and replacing sealing rings on condensers and crucibles.
Need help?
Do you have a question about the CF6 and is the answer not in the manual?
Questions and answers