Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Shin-Nippon SLM-4000
Summarization of Contents
Assembly/Disassembly of Exterior Features
Ink Tank Holder Assembly/Disassembly
Procedure for removing and installing the ink tank holder, specific to Inkwell models.
Lens Plate Assembly/Disassembly
Steps to remove and replace the lens plate, including screw specifications.
Case Assembly/Disassembly
Instructions for removing and reattaching the outer cases, noting screw counts.
Part Replacement
Control Board Replacement
Steps for replacing the main control board, including connector handling.
Printer and Printer I/F Board Replacement
Procedure for replacing the printer and its interface board for SLM-5000.
LCD Monitor Replacement
Guide for removing and replacing the LCD monitor assembly.
Inverter Board Replacement
Instructions for replacing the inverter board connected to the LCD assembly.
Operation Switch Board Replacement
Steps for removing and installing the operation switch board.
Switching Power Supply Replacement
Procedure for replacing the switching power supply unit.
Terminal ASSY Replacement
Guide for removing and installing the terminal assembly.
Marking ASSY Replacement
Instructions for replacing the marking assembly.
Marking Pen (Pin) Replacement
Procedure for replacing the marking pen tip.
Inkwell Replacement
Steps for refilling and reattaching the inkwell.
Lens Holder ASSY Replacement
Guide for replacing the lens holder assembly.
Illumination Circuit Board ASSY Replacement
Instructions for replacing the illumination circuit board.
Heavy/Light Motion Damper Replacement
Procedure for removing and installing motion dampers.
Troubleshooting
Measures Against Errors
General guidance and specific steps for resolving common error messages and operational issues.
Image Assessment
Engaging Dealer Mode for Image Assessment
Procedure to activate Dealer Mode for accessing diagnostic and assessment functions.
Checking Images in Dealer Mode
Procedure for selecting and viewing frozen measurement images within Dealer Mode.
Image Samples: Normal vs. Abnormal
Visual examples and explanations of normal and abnormal measurement image conditions.
Calibration
Engaging Dealer Mode for Calibration
Procedure to access Dealer Mode, a prerequisite for calibration.
Device Settings for Calibration
Configuration of system settings required before calibration.
Accessing the Calibration Screen
Steps to navigate to and display the main calibration screen.
Calibration Procedure Steps
Detailed instructions for performing various calibration steps.
Cleaning
Main Unit Cleaning
Instructions for cleaning the exterior surfaces of the main unit, LCD, and operation panel.
Optical Unit Cleaning
Guidelines for carefully cleaning optical parts to avoid damage.
Software Change and Upgrading
Software Upgrading Preparation
Requirements and setup for preparing the PC and instrument for software upgrading.
Software Upgrading Procedure
Step-by-step instructions for performing the software upgrade process.
Input/Output of Adjustment Data
Adjustment Data Transfer Overview
Explanation of why and how adjustment data is transferred between boards via PC.
Equipment for Data Transfer
List of necessary external equipment, including PC, cable, and software.
Preparation for Data Transfer
Steps for connecting the instrument to a PC and preparing the communication link.
Outputting Adjustment Data
Procedure to save adjustment data from the instrument to a PC file.
Inputting Adjustment Data
Procedure to load adjustment data from a PC file into the instrument.
Need help?
Do you have a question about the SLM-4000 and is the answer not in the manual?
Questions and answers