Download Print this page

Advertisement

Quick Links

THERMO
EASY
70400E
70401E
istruzioni
instructions
instructions de montage
Bedienungsanleitung
instrucciones
инструкции
instruktioner
使用说明
‫تعليامت‬
70402E
70403E
70404E
70405E

Advertisement

loading
Need help?

Need help?

Do you have a question about the XT 70402E and is the answer not in the manual?

Questions and answers

Summarization of Contents

Warnings for Use and Maintenance
Installation by Qualified Staff
Ensure installation is performed by qualified personnel according to regulations.
Avoid Abrasive Cleaning Materials
Do not use metallic or abrasive sponges, detergents, or products to avoid surface damage.
Purge System for New Installations
Purge the system before activation to prevent impurities from causing issues.
Routine Cleaning Instructions
Clean only with water and soap, rinse carefully, and dry with a soft cloth.
Installation Procedure Overview
Cut External Facing Flush
Cut the external facing precisely flush with the outer coating.
Seal Assembly
Apply sealant to the assembly to ensure proper sealing.
Adjust Button Position
Screw button to indicated projection, aligning with external facing line.
Verify Projection Measurement
Check projection measurement against the external facing line.
Install Cover Plate and Components
Install the cover plate and associated components as shown.
Orient and Assemble Parts
Orient parts downward and assemble using specified part numbers and tools.
Cartridge Calibration
Install Bushes and Orient Cartridge
Screw bushes into place, ensuring correct cartridge orientation (X to Y plane).
Set Water Temperature to 38°C
Monitor water temp with a thermometer and adjust knob to reach 38°C.
Insert Temperature Limit Control
Insert the temperature limit control as indicated in Figure B.
Final Assembly of Decorative Parts
Position decor plate, install handle, secure with screw, and add cover cap.
Spare Parts for Models 70400E, 70402E, 70404E
Exploded View and Part Numbers
Diagram and numbered parts list for specific Thermo Easy models.
Spare Parts for Models 70401E, 70403E, 70405E
Exploded View and Part Numbers
Diagram and numbered parts list for specific Thermo Easy models.
Disposal Information
Packaging Disposal
Guidelines for the proper disposal of product packaging.
End-of-Life Component Disposal
Instructions for the disposal of product components at the end of their service life.