Advertisement
Quick Links
Advertisement
Related Manuals for WATSON RELAY
Summarization of Contents
Control Box and Wiring
Feed Power Cable Through Rail Notch
Feed power cable through the rail notch for proper routing.
Secure Power Cable to Control Box
Loop power cable for strain relief and press it in, then place control box on rail.
Secure Control Box in Place
Secure control box with M6 screws and M6 Nylock Nut.
Connect Power Cords
Plug in the power cords.
Join and Level Workbench Segments
Align and Pull Frame Segments Together
Pull workbench frame segments together and level using adjustable glides.
Join Raceways with Screws and Nuts
Connect raceways using M6 screws and M6 nuts.
Join Raceways with Extended Connector
Connect raceways with an optional extended connector and specific screws.
Raceway Modular Power Setup
Route Jumpers Through Raceway Channel
Route the power jumpers through the designated raceway channel.
Connect Jumpers to Receptacle Blocks
Connect power jumpers to keyed receptacle blocks ensuring correct orientation.
Optional Extended Connector Kit
Connect 15" Jumper and Coupler
Connect the 15-inch jumper and coupler to the standard length jumper.
Secure Jumper Block to Extended Connector
Connect jumper to blocks, then clamp block to the extended connector base.
Optional Spine Screen Installation
Prepare Knockouts for Spine Screen
Twist knockouts to open holes for the spine screen support mounting.
Mount Spine Screen Supports
Insert spine screen supports into raceway opening and secure with screws.
Worksurface Installation
Feed Switch Cord Through Worksurface
Feed switch cord through worksurface and into PS2 port of control box.
Connect Control Box Power Cord
Plug the control box power cord into the raceway receptacle.
Secure Worksurface to Frame
Lift, align, and secure the worksurface to the frame using screws.
Optional End Caps or Aisle Screen
Attach Optional End Caps
Attach optional end caps to the unit using M6-1.0 nuts.
Attach Optional Aisle Screens
Attach optional aisle screens to the underside of the raceway and panel using screws.
Need help?
Do you have a question about the RELAY and is the answer not in the manual?
Questions and answers