Related Manuals for New Holland TL 85
Summarization of Contents
Introduction
Advice
General guidance for performing repair and maintenance works, emphasizing compliance with instructions and use of special tools.
International Symbols
Explanation of universal symbols used on instruments, controls, switches, and fuse box for machine operation.
Safety Rules
Standard Safety Precautions and Injury Prevention
General safety measures, workplace cleanliness, emergency preparedness, and personal protection guidelines.
Maintenance and Electrical Safety
Safety procedures during maintenance, handling hot fluids, and precautions for electrical systems.
Environmental and General Safety Regulations
Guidelines for environmental protection and general safety regulations for repair and maintenance operations.
Engine and System Specific Safety
Safety advice for engine starting, system maintenance, and handling fluids like hydraulic oil and fuel.
Machine Operation and Component Safety
Safety measures for operating the machine, including guards, access, and specific precautions for engine and tires.
Hydraulic, Electrical, and Component Handling Safety
Detailed safety guidelines for hydraulic systems, electrical components, and safe lifting/handling of heavy parts.
Chemicals and Hazardous Materials Safety
Precautions for handling acids, adhesives, sealants, anti-freeze, and general chemicals, including health risks.
Chemical Handling, Fire, and Shock Safety
Specific safety advice for chemical handling, fire prevention, electric shock prevention, and exhaust fumes.
Material Specific Safety (Foams, Kerosene, Gases)
Safety guidelines for specific materials like polyurethane foams, kerosene, gas cylinders, and general workshop equipment.
Legal, Lubricant, Paint, and Solvent Safety
Legal aspects, safety for lubricants, greases, paints, and solvents, including skin contact and ventilation.
Personal and Machine Safety Signals
Understanding safety alert symbols, signal words (DANGER, WARNING, CAUTION), and machine safety notices.
Personal Operation and Fluid Safety
General safety rules for personal operation, slopes, and precautions for hydraulic oil and diesel fuel leaks.
Machine Operation and Shutdown Procedures
Safety during machine operation, guards, access, and procedures for leaving the machine safely.
Maintenance, Wheels, and Tires Safety
General maintenance safety, and specific precautions for wheels and tires, including inflation and servicing.
Road Transport and Fire Prevention
Safety for driving on public roads, general transportation, and critical measures for fire and explosion prevention.
Battery, Instructional Seat, and Operator Presence System Safety
Safety guidelines for batteries, instructional seats, and the operator presence system, emphasizing proper usage.
PTO, Warning Lights, and Seat Belt Safety
Critical safety for Power Take-Off (PTO), reflectors, warning lights, and mandatory seat belt usage.
Protective Structures and PPE
Safety related to operator protective structures, air-conditioning systems, and personal protective equipment (PPE).
Hazardous Chemicals, Utilities, and Storm Safety
Safety for hazardous chemicals, utility awareness (cables, power lines), and electrical storm precautions.
Mounting and Dismounting Safety
Safe procedures for mounting and dismounting the machine, focusing on handholds, steps, and surface cleanliness.
Working at Heights and Load Handling Safety
Safety guidelines for working at heights and lifting/handling overhead loads, including equipment and load management.
Implements, Tools, and Trailers Safety
Safety considerations for attaching and operating implements, tools, and trailers, including hitching and speed.
Implement Turns and Projectile Safety
Safety advice for turning with implements and awareness of projectiles ejected by certain tools.
Roll Over and Tip Over Prevention
Critical safety information to prevent tractor roll overs and tip overs, including operational limits and stability.
Hydraulic System Detailed Safety
In-depth safety instructions for hydraulic systems, covering leaks, pressure, hoses, and component inspection.
Ecology, Environment, and Battery Recycling
Guidelines for environmental protection, safe fluid disposal, and mandatory battery recycling procedures.
Torque - Minimum Tightening Torques for Normal Assembly
Metric Flanged Hardware Torque
Torque specifications for metric flanged hardware, including different bolt and nut classes and plating options.
Hardware Identification
Inch Bolts and Free-Spinning Nuts Identification
Identification methods for inch bolts and free-spinning nuts, including grade marking examples.
Inch Lock Nuts Identification
Identification methods for inch lock nuts, including corner, flats, and clock marking methods for different grades.
Torque - Standard Torque Data for Hydraulics
Adjustable Fittings and Tube Nuts Torque
Torque specifications for hydraulic fittings, including adjustable O-ring bosses and 37° flared tube nuts.
Pipe Thread and ORFS Fittings Torque
Torque data for pipe thread fittings and ORFS fittings, including sealant and cleaning recommendations.
Basic Instructions - Shop and Assembly
Shimming, Seals, and Compounds
Procedures for shimming, installing shaft seals, lubricating O-rings, and applying sealing compounds.
Spare Parts Usage
Guidance on using genuine CNH Original Parts or NEW HOLLAND Original Parts for quality and safety.
Protecting Electronic and Electrical Systems
Charging and Welding Precautions
Essential practices to avoid damage to electronic/electrical systems during charging and welding operations.
Fluids and Lubricants
Engine, Transmission, and Fuel System Fluids
Specifications for engine lubrication, cooling, transmission, brake, fuel, and hydraulic fluids, including quantities and standards.
Engine Oil Viscosity Grade
Table showing recommended engine oil viscosity grades based on ambient air temperature ranges.
Engine
Engine and Crankcase
Details on the engine and crankcase components, including specific tractor models and their associated codes.
Need help?
Do you have a question about the TL 85 and is the answer not in the manual?
Questions and answers