Table of Contents
Related Manuals for Rheem HPHD-60VNU-201
Summarization of Contents
SAFETY
WATER TEMPERATURE SETTING
Discusses hazards of hot water and recommended temperature settings to prevent scalding.
ABOUT YOUR WATER HEATER
WATER HEATER APPLICATION
Specifies the intended purpose and use of the water heater.
HOW HOT SHOULD THE WATER BE?
Details recommended water temperatures and factory settings for optimal operation.
HOTTER WATER INCREASES THE RISK OF SCALD INJURY
Warns about the dangers of high water temperatures and suggests safety measures.
TEMPERATURE ADJUSTMENT
Explains how to adjust the water temperature setting on the control panel.
OPERATING THE WATER HEATER
TURNING THE WATER HEATER OFF AND ON
Provides step-by-step instructions for safely shutting down and starting up the water heater.
VERIFYING CORRECT INSTALLATION
Outlines the criteria to verify correct installation according to standards.
WATER HEATER CHARACTERISTICS
WATER CHEMISTRY IMPACT
Discusses how water chemistry can impact the water heater's performance and lifespan.
ENVIRONMENTAL CONCERNS
Addresses refrigerant recovery at the end of the unit's service life.
INSTALLATION CAUTIONS
Provides warnings regarding property damage from leaks and the need for backup hot water supply.
HOW YOUR WATER HEATER WORKS
OPERATING PRINCIPLES
Explains how the heat pump absorbs heat from air and transfers it to water.
AUXILIARY BOOST AND FAULT MODES
Describes auxiliary heating activation during low ambient temperatures or faults.
LOW AMBIENT TEMPERATURE OPERATION
Explains de-icing mechanisms and performance at low temperatures.
CONTROL AND MONITORING FEATURES
THERMAL CUTOUT AND CONTROL FUNCTIONALITY
Explains the function of thermal sensors, lockout, and control options.
SYSTEM MONITORING WITH SENSORS
Lists the 9 sensors used for system monitoring and display.
ROUTINE MAINTENANCE
ANNUAL SERVICE
Lists essential checks and maintenance tasks to be performed annually.
FIVE YEAR SERVICE
Outlines specific maintenance tasks required every five years.
MAINTENANCE VALVE DETAILS
RELIEF AND EXPANSION VALVES
Details the function and operation of relief and expansion valves.
WATER QUALITY AND WARRANTY
WATER CHEMISTRY IMPACTS
Explains the impact of chloride levels, pH, and saturation index on warranty.
SUMMARY OF WARRANTY AFFECTING CHEMISTRIES
Lists specific water chemistries that can void the warranty.
SAVE A SERVICE CALL
ADDRESSING HOT WATER ISSUES
Troubleshooting for insufficient, no, or too hot water supply.
DIAGNOSING HEAT PUMP PROBLEMS
Diagnosing heat pump non-operation and high electricity bills.
INSTALLATION GUIDELINES
INSTALLATION STANDARDS
Lists requirements for proper and compliant installation of the water heater.
INDOOR INSTALLATION AND LOCATION
Specifies requirements for indoor installation and selecting an appropriate location.
PLUMBING AND PIPING GUIDELINES
Covers safe tray, water supply, hot water delivery, and piping/insulation.
TYPICAL HEAT PUMP INSTALLATION WITH RECIRCULATION
Illustrates a common installation configuration for heat pumps with recirculation.
TYPICAL HEAT PUMP INSTALLATION WITH INLINE BOOST
Shows a diagram of an installation incorporating an inline booster.
TYPICAL HEAT PUMP INSTALLATION WITH LOW AMBIENT BOOST
Illustrates an installation with low ambient air boost and a dead leg system.
DIMENSIONS AND TECHNICAL DATA
60K BTU MODELS DIMENSIONS
Provides detailed dimensions and technical specifications for 60K BTU models.
60K BTU MODELS DIMENSIONS (VERTICAL DISCHARGE)
Provides dimensions for 60K BTU vertical discharge models.
135K BTU MODELS DIMENSIONS
Provides detailed dimensions and technical specifications for 135K BTU models.
135K BTU MODELS DIMENSIONS (VERTICAL DISCHARGE)
Provides dimensions for 135K BTU vertical discharge models.
INSTALLATION CLEARANCES
REQUIRED CLEARANCES FOR HEAT PUMPS
Details required clearances for different models and sides of the heat pump.
HEAT PUMP AND TANK ASSEMBLY
SYSTEM COMPONENTS AND INSTALLATION
Describes system components, heat pump location, and ducting requirements.
STORAGE TANKS AND CIRCULATORS
Explains the role of storage tanks, circulators, and stacking kits.
PIPE SIZING AND AUXILIARY HEATERS
Provides pipe sizing data and conditions for auxiliary heater installation.
MANIFOLD INSTALLATIONS
MANIFOLD INSTALLATION PRINCIPLES
Lists essential principles for balancing flow in manifold systems.
MANIFOLD ASSEMBLY DIAGRAMS
Shows the assembly of hot water flow and cold water manifolds.
STORAGE TANK INSTALLATION DIMENSIONS
Provides installation dimensions for multiple storage tanks.
PLUMBING CONNECTIONS
CONNECTION SIZES AND PIPE SIZING
Specifies connection sizes and advises on pipe sizing for optimal operation.
WATER VALVES AND DRAINAGE
Describes water inlet/outlet, relief valve, and expansion control valve installations.
PLUMBING DRAINAGE DETAILS
EXPANSION CONTROL VALVE DRAIN
Details the drain line requirements for the expansion control valve.
CONDENSATE DRAIN REQUIREMENTS
Outlines requirements for fitting and routing the condensate drain line.
ELECTRICAL CONNECTIONS
POWER SUPPLY AND TESTING
Covers power supply connection, megger testing, and electrical safety.
HEAT PUMP AND PUMP WIRING
Describes direct connection requirements for heat pump and pump power supply.
SENSOR CONNECTIONS
TANK AND FLOW TEMPERATURE SENSORS
Guides on connecting tank and building flow temperature sensors.
ELECTRICAL WIRING DETAILS
AUXILIARY BOOST ELEMENT WIRING
Explains how to wire auxiliary boost elements and heaters.
MULTI-UNIT AND BMS CONNECTIONS
MULTIPLE HEAT PUMP INSTALLATION
Details interconnecting multiple heat pumps using LAN cables.
BUILDING MANAGEMENT SYSTEMS (BMS/BAS)
Explains connecting the water heater to BMS/BAS systems via interface cards.
WIRING DIAGRAMS
HPHD-60VN WIRING DIAGRAM
Provides the electrical wiring diagram for the HPHD-60VN model.
HPHD-60HN WIRING DIAGRAM
Provides the electrical wiring diagram for the HPHD-60HN model.
HPHD-135 WIRING DIAGRAM
Provides the electrical wiring diagram for the HPHD-135 model.
CONTROL PANEL OPERATION
UPC PARAMETER HIERARCHY AND NAVIGATION
Outlines the structure and navigation of the UPC control panel parameters.
CONTROL PANEL QUICK OPERATION GUIDE
Offers a quick guide on operating the control panel and navigating menus.
MENU SETTING ADJUSTMENTS
SETPOINT QUICK SETTING
Details how to quickly adjust the water temperature setpoint.
MENU ITEM NAVIGATION
Explains navigation through the control panel menu items.
CONTROL PANEL DATA VIEWS
INPUT/OUTPUT DATA VIEW
Describes how to view input/output readings on the control panel.
ALARM HISTORY AND SERVICE MENU
Explains alarm history access and service menu options.
THERMOREGULATION PARAMETERS
THERMOREGULATION SETTINGS TABLE
Lists and explains various thermoregulation settings and parameters.
COMMISSIONING PROCEDURES
INITIAL FILLING AND POWER UP
Provides essential steps before powering on the water heater.
STANDALONE HEAT PUMP COMMISSIONING
Details the commissioning process for a single heat pump unit.
MULTI-HEAT PUMP COMMISSIONING
Outlines the commissioning process for multi-heat pump systems.
HEAT PUMP ADDRESS CONFIGURATION
SETTING HEAT PUMP ADDRESSES
Explains how to set addresses for heat pumps in a multi-unit system.
SECONDARY HEAT PUMP CONFIGURATION
ADJUSTING SECONDARY SENSOR SETTINGS
Guides on adjusting sensor parameters for secondary heat pumps.
TURNING ON AND SETTING CONTROLS
Instructions for activating heat pumps and setting time/tariff controls.
BMS CONFIGURATION PROCEDURES
BMS CONFIGURATION STEPS
Details the process for configuring BMS settings for Modbus and BACnet.
BMS INTERFACE CARD CONFIGURATION
BACnet TCP/IP ETHERNET CONFIGURATION
Covers configuration steps for BACnet TCP/IP Ethernet interface cards.
BMS COMMUNICATION VARIABLES
ANALOG VARIABLES FOR BMS
Lists and describes analog variables used for BMS communication.
INTEGER VARIABLES FOR BMS
Lists and describes integer variables for BMS communication.
INTEGER VARIABLES FOR BMS
Continues the list of integer variables for BMS communication.
DIGITAL VARIABLES FOR BMS
Lists and describes digital variables used for BMS communication.
DIGITAL VARIABLES FOR BMS
Continues the list of digital variables for BMS communication.
COMMISSIONING FINAL STEPS
TURNING OFF THE WATER HEATER
Provides step-by-step instructions for safely shutting down the water heater unit.
DRAINING THE WATER HEATER
Details the steps for safely draining water from the heater and its components.
TROUBLESHOOTING GUIDE
COMMON START-UP AND OPERATIONAL ISSUES
Addresses heat pump start-up delays, phase rotation, alarms, and shut-off issues.
COMPRESSOR NOISE AND AMBIENT TEMPERATURE
Guides on diagnosing compressor noise and low ambient temperature effects.
AUTOMATIC DEFROST SYSTEM
DEFROST MODES AND AUXILIARY HEATER
Explains defrost operation and auxiliary heater settings.
ACCESSORIES LIST
AVAILABLE ACCESSORIES
Provides a list of available accessory part numbers and descriptions.
WARRANTY INFORMATION
WARRANTY TERMS AND CONDITIONS
Outlines the general terms, effective date, and warranty exclusions.
WARRANTY CLAIM ASSISTANCE
Provides instructions on how to initiate and process a warranty claim.
LIMITATION OF LIABILITY
States Rheem's sole liability and excludes consequential damages.
Need help?
Do you have a question about the HPHD-60VNU-201 and is the answer not in the manual?
Questions and answers