Bissell Steam Mop Max User Manual page 5

A
ssembly
Your Steam Mop Max assembles quickly and
easily. The only thing you will need for assembly
is a Phillips head
Your Steam Mop Max is packaged with the
following items:
Handle Assembly
Lower Body with Water Purification System
360° Swivel Head
Removable Water Tank
1 large Phillips Head Screw
1 small Phillips Head Screw
2 Deluxe Mop Pads
1. Attach lower body to maneuverable swivel
head.
2. Secure 360° swivel head with small Phillips
head
3.
Slide handle assembly down into lower
body until it will go no further.
4.
Secure the handle by placing the large Phillips
head
the lower body and into the rear of the handle
assembly. Tighten with screwdriver until
secure.
5.
Slide water tank onto lower body by lining up
vertical glides and gently sliding tank into place.
Steam Mop Max assembly is now complete.
w w w . b i s s e l l . c o m
ug120-4108_21H6_709.indd 5
screwdriver.
screw. Tighten until secure.
screw through the screw opening in
Handle Assembly
Lower Body
Maneuverable Swivel Head
Removable 2 Deluxe Mop Pads
Water Tank
1 2
3 4
5
8 0 0 . 2 3 7 . 7 6 9 1
Large Screw
Small Screw
5
7/10/09 10:34 AM