Standard Accessories; Foot Control - Bernina Activa 210 User Manual

6

Standard Accessories

Accessories*
*may vary from country to country
Power cable
D
A
C
Accessory bag
•
2 bobbins (+ 1 in bobbin case)
•
Presser feet shaft with 4 soles
•
Selection of 130/705H needles
•
Seam ripper
•
Lint brush
•
3 spool discs
•
Foam pad
•
Oiler
•
Instruction manual
•

Foot control

•
Power cable
•
Warranty card
•
The power cable
plug A into sewing computer
•
plug B into wall socket
•
Foot control cable
plug C into sewing computer
•
Power switch (D)
1 the computer is switched on
B
0 the computer is switched off
The sewing light is switched on
and off with the power switch.
032622.50.04_0701_a210_EN
Foot control
Important! (USA/Canada only)
This sewing computer has a po-
larized plug (one blade wider
than the other). To reduce the
risk of electric shock, this plug
is intended to fit in a polarized
outlet only one way. If the plug
The foot control regulates the
sewing speed
Sewing speed is adjusted by
applying more or less pressure
to the foot control.
Important! (USA/Canada only)
Use only foot controller type
SR-1 with sewing computer
activa 210.
Self storing cord
wind the cord on the reel
•
insert the plug into the
•
groove provided
When sewing
unwind the cable
•
Refer to the safety
instruction!
does not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified elec-
trican to install the proper out-
let. Do not modify the plug in
any way.