Operation - Coby CSMP80 - Multimedia Speaker System Instruction Manual

Operation

1. Turn the volume control knob (Volume) and the bass
control knob (Bass) to the lowest level. Set the power
switch on the rear panel of the main unit to the "On"
position. Indicator lights will illuminate.
2. Adjust the volume control knob (Volume) to the
desired position (clockwise to increase volume,
counter-clockwise to decrease), then adjust the bass
knob (Bass) to your desired tone.
3. When the system is not in use, turn the Volume and
Bass knobs to the lowest level and switch off the
power.
4. To avoid damaging the system, please switch off the
power before connecting or disconnecting speakers.
Page 6 Coby Electronics Corporation