Advertisement
Table of Contents
- 1 Introduction
- 2 Table of Contents
- 3 Specifications
- 4 General Information
- 5 Safety Rules
- 6 Safety Decals
- 7 Operation
- 8 Owner Service 15
- 9 Troubleshooting
- 10 Dealer Service
- 11 Assembly
- 12 Dealer Check Lists
- 13 Index to Parts Lists
- 14 Bolt Torque Chart
- 15 Bolt Size Chart & Abbreviations
- Download this manual
Advertisement
Table of Contents
Related Manuals for Woods TCR68
Summarization of Contents
Safety Rules
Safety Training and Manuals
Safety instructions are important and require reading all manuals and decals.
Pre-Operation Safety Checks
Check hardware, clothing, and attachment condition for safe operation.
Safe Operation Practices
Engage power only at ground level and keep bystanders clear.
Operation
Tractor Attachment Procedure
Step-by-step guide for connecting the tiller to the tractor's hitch and PTO.
Driveline Length Adjustment
Instructions on shortening the PTO driveline for proper engagement.
Working Depth Adjustment
How to adjust the tiller's working depth using skid shoes.
Tiller Side Shift Adjustment
Procedure for adjusting the tiller's side shift capability for optimal use.
Start-Up and Operation Sequence
Procedures for starting the tractor and engaging the PTO with the tiller.
Rear Shield Adjustment
How to adjust the rear shield for different soil finishes and conditions.
Tilling Techniques
Techniques for tilling sod, untilled ground, and previously tilled ground.
Pre-Operation Checklist
A checklist for the owner to ensure the tiller is ready before operation.
Owner Service
Safe Blocking for Service
Procedures for safely blocking the tiller for underneath maintenance.
Lubrication and Maintenance Guidelines
Guidelines for proper lubrication points and frequency.
Drive Chain Maintenance
Instructions for inspecting and maintaining the drive chain.
Gearbox Lubrication and Service
Information on checking and changing the gearbox oil.
Bearing and Shaft Service
Procedures for servicing bearings and shafts on the tiller.
Slip Clutch Adjustment
Steps for adjusting and testing the slip clutch.
Driveline Shear Bolt Replacement
How to replace the shear bolt for driveline protection.
Equipment Cleaning Procedures
Instructions for cleaning the equipment after use and for storage.
Four Blade Installation Guide
Guide for installing four blades onto the rotor.
Six Blade Installation Guide
Guide for installing six blades onto the rotor.
Dealer Service
Dealer Gearbox Maintenance
Instructions for dealer service personnel on gearbox maintenance.
Dealer Seal Installation
Proper procedures for installing seals in the gearbox.
Input Shaft Repair Procedure
Steps for repairing the input shaft of the gearbox.
Output Shaft Repair Procedure
Steps for repairing the output (hollow) shaft of the gearbox.
Universal Joint Repair Process
Detailed breakdown and repair process for universal joints.
U-Joint Disassembly Steps
Step-by-step guide for disassembling universal joints.
U-Joint Assembly Steps
Detailed guide for reassembling universal joints.
Assembly
Shipping Unit Disassembly
Steps for safely uncrating and preparing the tiller for assembly.
Component Assembly Procedures
Detailed instructions for assembling the rotary tiller components.
Dealer Check Lists
Pre-Delivery Checklist
Checklist for dealers to ensure proper setup before customer delivery.
Delivery Checklist and Handover
Checklist for dealers to cover customer handover and important information.
Need help?
Do you have a question about the TCR68 and is the answer not in the manual?
Questions and answers