Related Manuals for UniOP CP01R-04
Summarization of Contents
Introduction
Product Identification
Identifies the product model via a plate on the rear.
Technical Specifications
Details technical parameters like memory, ports, and power.
Installation
Physical Dimensions
Details physical dimensions and cut-out dimensions for panel types.
Connections
Illustrates connector layouts for various UniOP panel models.
Power Supply and Grounding
Explains power connection and safety grounding procedures.
PLC Port
Describes the PLC port for communication with controllers.
PC/Printer Port
Details the PC/Printer port for programming and serial printer connection.
AUX Port
Describes the AUX port for industrial network communication.
Mounting Communication Modules
Provides steps for installing communication modules.
Models without PC/Printer Port
Identifies models lacking a PC/Printer Port and programming methods.
External Keyboard Port
Details the port for connecting external keyboards.
Battery Replacement
Guides on replacing the lithium battery for data backup.
Removing Legends
Instructions on how to remove and replace keyboard legends.
Dedicated LED's
Explains the meaning and status of dedicated LEDs on the panels.
Applying Gaskets
Instructions for applying rectangular and linear gaskets for panel sealing.
Installation Procedures
Describes the method for mounting panels using fixing brackets.
Cleaning Faceplates
Guidelines for cleaning the panel's front faceplate.
Handling Memory Cards
Procedures for handling SSFDC memory cards to prevent damage.
Getting Started
Overview of programming UniOP panels with the Designer package.
Usage and Safety Guidelines
Applicable Regulations
Lists European regulations relevant to operator interfaces.
Installation Environment
Specifies conditions for optimal and safe panel installation.
Command Summary
Keyboard Commands Overview
Describes keyboard commands classified by operating modes.
Configuration Mode Commands
Details commands for the panel's configuration mode.
Operation Mode Commands
Lists commands used during the panel's operation mode.
Command Menu Navigation
Explains navigation within the command menu.
System Menu Navigation
Explains navigation within the system menu.
Data Entry Mode Commands
Describes commands for entering data in various modes.
Alarm and Event Mode Commands
Lists commands for managing alarms and event logs.
Password, Time, and Page Selection
Commands for password entry, time setting, and page selection.
Direct Access Mode Commands
Details commands for direct access to panel functions.
Troubleshooting
Switching to Configuration Mode
Procedure to switch to Configuration Mode if startup fails.
Touchscreen Calibration
Guides for standard and emergency touchscreen calibration.
Need help?
Do you have a question about the CP01R-04 and is the answer not in the manual?
Questions and answers