Related Manuals for Tractus3D T850P
Summarization of Contents
Safety and Compliance
Safety Notices
Warnings and safety notices about printer operation and potential hazards.
Hazards
Discusses electromagnetic and electrical safety hazards associated with the printer.
Introduction
Main Components
Lists and describes the primary parts of the 3D printer.
Specifications T850P
Technical specifications for the T850P model, including dimensions and capabilities.
Specifications T650P
Machine Properties
Lists technical properties like printing technology, speed, and resolution.
Physical Dimensions
Details about the T650P model's physical size and weight.
Build Plate
Specifications for the T650P build plate, including material and temperature.
Print Head
Details about the T650P print head and nozzle specifications.
Ambient Conditions
Recommended operating temperature and humidity for the T650P.
Materials
Supported materials and filament diameter for the T650P.
Software
Software details for the T650P, including OS compatibility.
Setup for First Use
Set Up Network
Guide to configuring the printer's network connection for initial setup.
Change to Static IP Address
Instructions for setting a static IP address via the web interface.
System Editor
Navigating the System Editor to modify configuration files.
Configuring Network Settings
Details on modifying M552, M553, and M554 in config.g for network settings.
Update the Firmware
Steps to update the printer's firmware using the web interface.
Calibrating the Print Bed
Guide to calibrating the print bed for optimal print adhesion and quality.
Auto Delta Calibration
Process for automatic delta calibration of the print bed.
Installing Slicing Software
Instructions for installing Simplify3D slicing software for print preparation.
Downloading Simplify3D
Steps to download and install Simplify3D software from the website.
Importing Tractus3D Settings
How to import specific printer settings into Simplify3D.
Configuring Print Profiles
Setting up process profiles within Simplify3D for different print jobs.
Importing Models
Importing STL or OBJ files into Simplify3D for printing.
Updating Firmware Settings in Simplify3D
Importing firmware configuration files into Simplify3D.
Uploading Files to 3D Printer
Guide on uploading G-Code files to the printer via the web interface.
Operation
Web Interface
Explains controlling the printer remotely using the web interface.
Machine Control
Details on printer status and hardware monitoring via web interface.
Head Movement Controls
Using buttons for printhead movement and calibration.
User-Defined Macros
Creating and using custom macros for frequent tasks.
Extruder Control
Manual extrusion control for loading and unloading filament.
Print Status Controls
Managing print jobs: pause, resume, cancel, and print another.
Baby Stepping
Adjusting Z-axis offset for first layer adhesion.
Fan Control and Speed Settings
Overriding print file settings for fans and speed.
G-Code Files Management
Uploading and organizing G-code files for printing.
Start a Print
Initiating a print job from the G-code files list.
Extra File Options
Using simulate, download, rename, and delete options for files.
Materials
Material Compatibility
Discusses open material support and preferred filaments.
Print Recommendations
Recommended settings for PLA, PETG, ABS, and Facilan C8.
PRO1 and PEEK/PEI Print Recommendations
Recommended settings for PRO1, PEEK, and PEI materials.
Tips for Experimental Materials
Advice for using and troubleshooting experimental filaments.
Material Temperature and Dimensional Accuracy
Tips on managing material temperature and contraction.
Operating the 3D Printer
Load Material
Step-by-step instructions for loading filament into the printer.
Nozzle Temperature for Loading
Requirement for nozzle temperature above 170 degrees for filament loading.
Unload Material
Instructions for safely unloading filament from the printer.
Removing the Filament with a Blob
Procedure for removing filament that has formed a blob.
Clearing Filament Blobs
Detailed steps to remove a blob from filament using tools.
Maintenance
Maintenance Schedule
Recommended maintenance tasks based on usage frequency.
Change the Print Head
Step-by-step guide for replacing the print head.
Cutting Stuck Filament
How to handle and cut filament stuck in the print head.
Disconnect the Main Cable
Procedure for disconnecting the main cable from the print head.
Disconnect the Arms from the Print Head
Steps to detach the arms from the print head unit.
Installing New Print Head
Instructions for installing a new print head and reconnecting components.
Change the Bed Plate
Steps for changing or replacing the printer's build plate.
Dimensional Accuracy Calibration
How to calibrate the printer for precise dimensions.
Updating Scale Factors
Modifying M579 line in config.g for scale calibration.
Material Usage and Storage
Guidelines for proper storage of filament to maintain quality.
Clean the 3D Printer
Procedures for cleaning the printer's casing and bed plate.
Check All Arms
Inspecting and lubricating the printer's arms for smooth movement.
Clean the Print Head and Nozzle
Steps for cleaning the print head and nozzle.
Clean the Bowden Tube
Instructions for cleaning the Bowden tube to ensure filament flow.
Removing Front Air Diffuser Panel
Step to remove the front panel for access.
Pulling Out the Bowden Tube
Method to detach the Bowden tube from the feeder.
Clean the Slide Wheels
Cleaning and lubricating the printer's linear slide wheels.
Check Tension and Wear of Belts
Procedure for checking and adjusting belt tension for print quality.
Check if Print Head Fan is Running After Heating Up
Verifying the print head fan operation after heating.
Clean or Replace the Feeder/Extruder Motor
Cleaning and maintaining the feeder/extruder motor.
Removing Extruder Motor Unit
Steps to remove the extruder motor for cleaning or replacement.
Cleaning or Replacing Extruder Gear
Cleaning/replacing the extruder gear and reassembling.
Troubleshooting
Unclog a Print Head
Methods for unclogging the print head (Hot Pull and Cold Pull).
Print Quality Issues
Troubleshooting poor bed adhesion, under-extrusion, and warping.
Need help?
Do you have a question about the T850P and is the answer not in the manual?
Questions and answers