Table of Contents
Advertisement
4. Push down the retention bracket lock on the retention mechanism to
secure the heatsink and fan to the module base.
2.3.4 Connecting the CPU fan cable
When the fan, heatsink, and the retention mechanism are in place,
connect the CPU fan cable to the connector on the motherboard labeled
CPU_FAN.
Don't forget to connect the CPU fan connector! Hardware monitoring
errors may occur if you fail to plug this connector.
2.3.5 CPU heatsink and fan Qualified Vendors List
The following table lists the CPU heatsink and fan assembly that have
been tested and qualified for use with this motherboard.
Vendor
Thermaltake
Foxconn
Ajigo
2-10
Part Number
A1724
NBT-K5011NE1DBVCB-001
MF043-044
CPU Fan Connector
(CPU_FAN1)
Chapter 2: Hardware information
Advertisement
Table of Contents
