Table of Contents
Advertisement
Quick Links
INSTALLATION, OPERATION & MAINTENANCE
WARNING!
DO NOT PRESSURE TEST RISK OF
SERIOUS INJURY
As a plumbing appurtenance your Endura® grease
interceptor MUST be isolated from the drainage system in
the event that final drain testing or other system pressure
testing is required. DO NOT under any circumstances
subject your interceptor to pressure test (Air, Water
or Otherwise). This action will result in damage to
the unit, invalidate your warranty and could cause
serious bodily injury.
Technical Support: tech-support@endurainterceptor.com
*
PDI G-101, ASME A112.14.3 TYPE A, AND NSF ES 15741
APPLICABLE TO XL75 AND XL100 GPM MODELS ONLY
*
*
*
ASME A112.14.3 (TYPE A
& TYPE C)
& CSA B481.1
WARNING – SAFETY FIRST!
GREASE INTERCEPTORS ARE HAZARDOUS
ENVIRONMENTS AND MUST NEVER BE LEFT UNCOVERED
AND UNATTENDED, EVEN DURING MAINTENANCE.
• All access covers MUST be fully and completely secured
• All required bolts MUST at all times be in place and well tightened
• Missing bolts MUST be reported to management and replaced immediately
•
Covers MUST meet the required load rating for the application (see the
Technical Information section)
•
Do NOT use alternate covers
Canada
1-800-461-1771
Manual 40100-32
U.S.A
1-888-461-5307
12/20
Advertisement
Table of Contents
Related Manuals for Endura XL150
Summarization of Contents
Installation, Operation & Maintenance Guide
Product Features Overview
Key features and design elements of the Endura XL grease interceptor.
Glossary of Essential Terms
Definitions of industry-specific terms related to grease interceptors and plumbing.
Quick Start Installation Guide
Step-by-step initial installation instructions for Endura XL units.
Technical Specifications and Parts
Detailed specifications, parts list, and technical data for Endura XL interceptors.
Detailed Installation Instructions
Comprehensive guidance on installing the Endura XL grease interceptor.
Installer Handover Checklist
Checklist for installers to document completed installation details and handover.
Operating the Grease Interceptor
Guidelines for the proper functioning and use of the Endura XL grease interceptor.
Maintenance and Cleaning Procedures
Procedures for regular cleaning, inspection, and upkeep of the interceptor.
Pumper Service Checklist
Checklist for service professionals performing pump-outs and maintenance.
Troubleshooting Common Issues
Common problems and their solutions for Endura XL grease interceptors.
Frequently Asked Questions
Answers to common queries regarding sizing, installation, and maintenance.
Product Warranty Information
Information regarding the limited lifetime warranty for Endura XL products.
Need help?
Do you have a question about the XL150 and is the answer not in the manual?
Questions and answers