Advertisement
Quick Links
TBC26
TBC33
TBC43
TBC52
GASOLINE BRUSHER CUTTER 2T
DESBROZADORA A GASOLINA 2T
ROÇADEIRA À GASOLINA 2T
PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS INFORMATION FOR YOUR SAFETY.
POR FAVOR, LEA ATENTAMENTE ESTE MANUAL. CONTIENE INFORMACIÓN PARA SU SEGURIDAD.
POR FAVOR, LEIA ATENTAMENTE ESTE MANUAL. ELE CONTÉM INFORMAÇÕES PARA SUA SEGURANÇA.
OWNER'S MANUAL
GUÍA DEL PROPIETARIO • MANUAL DO PROPRIETÁRIO
Advertisement
Related Manuals for Toyama TBC52
Summarization of Contents
When Operating Your Brusher
Part I: Safe Operation Guidelines
Essential safety rules for operating the brush cutter, covering conditions to avoid and general precautions.
Part II: User Responsibilities and Restrictions
User responsibilities, including manual accessibility, unauthorized users, and product modifications.
Part III: Operational Posture and Condition Checks
Guidance on maintaining correct posture, checking for wear, and ensuring the machine's good working condition.
Inspection Before Operating
Pre-Operation Checks - Part 1
Steps for inspecting fuel, checking for leaks, cleaning debris, and checking the air filter.
Pre-Operation Checks - Part 2
Inspections for malfunctions, bolt tightness, component fit, blade condition, and workplace safety.
Installing the Reel
Reel Installation - Part 1
Steps for removing nuts, flanges, and attaching the protection guard and reel assembly.
Reel Installation - Part 2
Instructions on removing rubber caps, adjusting cutting wire, and using nylon monofilament.
Installing the Blade
Blade Installation - Part 1
Steps for removing nuts, flanges, and attaching the protection guard and blade.
Blade Installation - Part 2
Instructions for fitting the blade, securing components, and sharpening the blade.
Changing the Reel Nylon Wire
Reel Nylon Wire Change - Part 1
Steps to remove spool cover, spool, spring, and cut the nylon wire to the correct length.
Reel Nylon Wire Change - Part 2
Instructions for fitting wire, threading eyelets, placing washers, and reassembling the spool cover.
Starting the Brusher
Starting Procedure - Part 1
Initial steps for starting the engine, including checking oil, moving the switch, and using the primer.
Starting Procedure - Part 2
Steps for pulling the starter handle, returning it, and repeating if the engine does not start.
Cutting with the Nylon Reel
Nylon Reel Cutting - Part 1
Preparing the cutting area, starting the engine, and tilting the reel to direct debris away from the operator.
Nylon Reel Cutting - Part 2
Techniques for cutting leaves and stems, and avoiding damage by pressing the reel against the ground.
Using the Blade
Blade Usage - Part 1
Overview of different blade types and general warnings regarding damaged blades and obstructions.
Blade Usage - Part 2
Specific applications for blades, cutting techniques, and precautions like avoiding contact with stones and sharpening.
Cleaning the Spark Plug
Spark Plug Cleaning - Part 1
Steps to cool the engine, disconnect protection, remove surrounding dirt, and remove the spark plug.
Spark Plug Cleaning - Part 2
Checking electrode spacing, reinstalling the spark plug, and reattaching its protection.
Changing the Spark Plug
Spark Plug Change - Part 1
Steps for cooling, disconnecting protection, removing dirt, and removing the old spark plug.
Spark Plug Change - Part 2
Instructions for installing the new spark plug, tightening it, and reinstalling its protection.
Air Filter Maintenance
Air Filter Maintenance - Part 1
Steps for removing the filter cover, filter element, and cleaning it.
Air Filter Maintenance - Part 2
Drying the filter element, oiling it, cleaning the cover, and reinstalling the filter assembly.
Changing the Fuel Filter
Fuel Filter Change - Part 1
Steps for removing the fuel tank cap, draining fuel, and removing the old fuel filter.
Fuel Filter Change - Part 2
Instructions for reinstalling the new fuel filter, filling the tank, and reattaching the cap.
Storage
Storage Procedure - Part 1
Steps for removing fuel, cleaning the tank, checking the fuel filter, and running the engine dry.
Storage Procedure - Part 2
Adding engine oil to the cylinder, distributing it, and positioning the piston.
Storage Procedure - Part 3
Reinstalling the spark plug, cleaning engine parts, and storing the engine in a suitable location.
Need help?
Do you have a question about the TBC52 and is the answer not in the manual?
Questions and answers