Table of Contents
Advertisement
Quick Links
.
D-ILA
PROJECTOR
DLA-X950R
DLA-X750R
DLA-X550R
.
http://manual3.jvckenwood.com/projector/mobile/global/
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
.
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
Model No.
DLA-X950R / DLA-X750R /
DLA-X550R
Serial No.
.
Not suitable for household room illumination.
Mobile User Guide
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
N° de modèle
DLA-X950R / DLA-X750R /
DLA-X550R
N° de série
INSTRUCTIONS
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
Modelo Nº
DLA-X950R / DLA-X750R /
DLA-X550R
Nº de serie
B5A-1144-13
Advertisement
Chapters
Table of Contents
Related Manuals for JVC DLA-X750R
Summarization of Contents
Accessories/Optional Accessories
Check the Accessories
Lists all included accessories and their quantities.
Optional Accessories
Details about accessories available for separate purchase.
Controls and Features
Main Unit - Front
Describes the front panel controls and indicators of the projector.
Main Unit - Bottom
Details the bottom side features and mounting points of the projector.
Loading Batteries into the Remote Control
Removing the batteries
Instructions for safely removing batteries from the remote.
Effective Range of Remote Control Unit
Specifies the operational distance and angle for the remote control.
Installing the Projector
Precautions during Installation
Crucial safety and operational guidelines before installing the projector.
Maintain clearance from the wall, etc.
Recommendations for ensuring adequate ventilation space around the projector.
Installing the screen
Guidance on positioning the screen relative to the projector.
Using the projector at a high altitude
Instructions for using the projector in low-pressure environments.
Precautions during Mounting
Securing (mounting) the projector
General advice on securely mounting the projector unit.
Securing the projector (ceiling mount)
Specific instructions for safe ceiling mounting of the projector.
Securing with screws
Details on screw types and clearance needed for mounting.
Adjusting the Position
Adjusting the elevation angle of the projector
How to adjust the projector's height and tilt using the feet.
Adjusting the position of the image
Using the lens shift feature to adjust image position.
Connecting the Projector
Connecting to the HDMI Input Terminal (Digital Input)
Steps for connecting the projector via HDMI cable.
Connecting through an AV amplifier
Guide to connecting the projector via an AV amplifier.
Viewing Videos
Turn on the power
Step-by-step guide for powering on the projector and remote.
Choose the image to project
How to select the input source for displaying video.
Adjusting the Projector Screen
Adjusting the Lens According to the Projection Position
Using lens control for focus, zoom, and screen position adjustments.
Saving and Retrieving Adjustment Settings
Saving an adjustment data
Procedure for saving current lens memory settings.
Retrieving an adjustment data
Renaming an adjustment data
How to edit the names of saved lens memory settings.
Setting Screen Correction
Set Screen Adjust
Selecting optimal correction mode for screen characteristics.
Viewing 3D Movies
Installing the 3D SYNCHRO EMITTER
Steps to connect the 3D Synchro Emitter to the projector.
Viewing 3D Movies
Adjusting 3D Movies
Guidance on adjusting 3D images for viewer comfort and quality.
Selecting an Image Quality According to the Video Type
Setting the Picture Mode
How to select pre-defined picture modes for different content types.
Fine-tuning the Image Quality
Adjusting the Output Value of the Projected Image (Gamma)
Adjusting the gamma curve to control brightness and contrast.
Gamma Settings for Different “Color Profile" X550R
Fine-tuning to the Preferred Gamma Setting
Performing fine adjustments to gamma settings.
Motion Enhance
Viewing High Contrast Images (Lens Aperture)
Using lens aperture to enhance image contrast.
List of Menu Items
Picture Adjust
Adjustments related to image quality and display.
Input Signal
Settings for controlling video input signals.
Installation
Configuration options related to projector installation.
Display Setup
Settings for customizing the on-screen display.
Function
Configuration of various operational functions.
Information
Access to system information like lamp time and firmware version.
Picture Adjust
Picture Mode
Adjusts image quality based on content type.
Clear Black
Adjusts image brightness for improved contrast.
Lamp Power
Controls the projector lamp's brightness level.
Lens Aperture
Dynamically adjusts aperture for enhanced image contrast.
User Name Edit
Allows renaming of user-defined picture modes.
Color Profile
Color Management
Allows fine-tuning of color preferences.
Color Temp.
Sets the color temperature of the video image.
Gamma
Adjusts output value for projected images.
Picture Tone
Balances overall brightness without losing gradation.
Dark Level/Bright Level
Adjusts image quality for sharp contrast.
4K e-shift
Original Resolution
Selects resolution based on content being viewed.
Enhance
Improves image quality and definition.
Dynamic Contrast
Enhances contrast for a more dynamic image.
Smoothing
Softens image by adjusting low-frequency areas.
NR
Reduces pronounced noise in the video image.
Blur Reduction
Brightness
Adjusts the overall brightness of the video image.
Contrast
Adjusts difference in brightness for image contrast.
Input Signal
Input Level
Sets the dynamic range (gradation) of the video input.
Color Space
Sets the color space of the input signal.
Aspect
Progressive
Sets interpolation method for interlaced signals.
Mask
Hides peripheral image areas with a black strip.
3D Setting
Configures settings for viewing 3D movies.
Picture Position (Horiz./Vert.)
Adjusts image position for synchronization timing.
HDMI2 EDID
Changes EDID mode for HDMI 2 terminal.
Installation
Lens Control
Adjusts focus, zoom, and shift for projection position.
Image Pattern
Displays lens adjustment patterns or external signals.
Lock
Locks lens to prevent erroneous adjustments.
Lens Memory Select / Lens Memory Save / Lens Memory Name Edit
Saves and retrieves lens adjustment settings.
Lens Center
Returns lens position to the center.
Lens Cover
Controls the opening and closing of the lens cover.
Pixel Adjust
Adjust Area
Selects adjustment scope: entire image or specific zones.
Adjust Color
Selects color for pixel adjustment (Red or Blue).
Adjust Pattern Color
Sets the color for the adjustment pattern.
Adjust (Pixel)
Makes pixel-level adjustments for color fringing.
Adjust (Fine)
Performs fine adjustments for screen misalignment.
Reset
Restores all pixel adjustment data to factory default.
Installation Style
Keystone
Corrects keystone distortion when projector is angled.
Anamorphic
Configures settings for use with an anamorphic lens.
High Altitude Mode
Enables mode for low atmospheric pressure locations.
Screen Adjust
Performs correction for screen characteristics.
Display Setup
Back Color
Sets background color for no-signal input.
Menu Position
Sets the display position of the menu.
Signal Display
Controls display of input terminal information.
Logo
Controls display of the D-ILA logo during startup.
Language
Sets the on-screen display language.
Remote Code
Lamp Reset
Resets the lamp usage timer to zero.
Replacing the Lamp
Lamp Replacement Procedure
Step-by-step guide for replacing the projector lamp unit.
Resetting the Lamp Time
Resetting the lamp time from the menu screen
Procedure to reset lamp time via the menu.
Resetting the lamp time using the remote control
Method to reset lamp time using the remote control.
Troubleshooting
Power is not supplied
Checks and actions for when the projector does not power on.
Power shuts down automatically
Troubleshooting steps for unexpected automatic shutdowns.
3D images do not appear
3D video image looks unnatural
Addresses issues with overlapping or misaligned 3D images.
Video image looks unnatural
Colors are unnatural
Troubleshooting steps for incorrect color display.
Video image is fuzzy
Resolves issues with blurry or unfocused images.
Video image flickers
Addresses flickering image problems.
Projected image is dark
Troubleshoots issues with a dim projected image.
Video image appears horizontally (vertically) extended
Fixes image stretching or distortion.
Striped patterns appear on the screen
Video images are missing
Diagnoses and resolves missing video image issues.
Remote control does not work
Troubleshoots issues with the remote control's functionality.
The lens cover does not close X950R X750R
Addresses problems with the lens cover not closing.
Noise is heard
Diagnoses causes of unusual operating sounds.
External Control
RS-232C Specifications
Technical details for RS-232C communication.
TCP/IP Connection
Information on establishing LAN communication.
THX 3D Display Certification
Screen Size and Projection Distance
Table of screen sizes and corresponding projection distances.
When a 4:3 screen is used
When a 2.35:1 screen is used
Projection distances for 2.35:1 aspect ratio screens.
Indicator Display on the Main Unit
Meaning of the lighting figures
Explanation of indicator light states.
Operation mode display
Describes various indicator light combinations.
Estimated timing for lamp replacement
Indicates when the projector lamp needs replacement.
Need help?
Do you have a question about the DLA-X750R and is the answer not in the manual?
Questions and answers