Volvo Penta AQ231 Operator's Manual
  1. Manuals
  2. Brands
  3. Volvo Penta Manuals
  4. Engine
  5. AQ231
  6. Operator's manual
Volvo Penta AQ231 Operator's Manual

Volvo Penta AQ231 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATOR'S MANUAL
AQ205, AQ211, AQ231, AQ271, AQ311
BB231, BB261

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQ231 and is the answer not in the manual?

Questions and answers

Related Manuals for Volvo Penta AQ231

Summarization of Contents

IMPORTANT INFORMATION
GENERAL INFORMATION
INTRODUCTION
Valuable information for handling and maintenance of your Volvo Penta engine.
VOLVO PENTA SERVICE
Information on Volvo Penta's comprehensive service organization and dealer network.
WARNINGS
Critical safety warnings regarding potential injury or damage if instructions are not followed.
FUEL
Guidelines on using the correct gasoline octane rating and fuel additives.
LUBRICATION OIL
RUNNING IN
SPARE PARTS
WARRANTY INSPECTION (NOT USA)
FIRST INSPECTION (USA)
OIL CHANGES
SPEED RANGE, MAXIMUM SPEED
SAFETY EQUIPMENT
PREPARATIONS BEFORE STARTING
STARTING THE ENGINE
RUNNING INSTRUCTIONS
Running in shallow waters
Procedures for operating the drive in shallow water conditions to prevent damage.
SHUTDOWN PROCEDURE
Steps for safely shutting down the engine after operation, including idling.
COLD WEATHER PRECAUTIONS
CHECK DAILY BEFORE STARTING
CHECK EVERY 14 DAYS
OIL LEVEL IN THE MS4A REVERSE GEAR
OIL LEVEL IN THE HYDRAULIC PUMP, POWER TRIM
BELT TENSION
CHECKING THE CORROSION PROTECTION
SERVICE EVERY 50 HOURS OF OPERATION
Engine oil change
Steps for changing the engine oil and filter at specified intervals.
SERVICE EVERY 100 HOURS OF OPERATION OR AT LEAST ONCE PER SEASON
OIL FILTER
Procedure for replacing the engine oil filter at scheduled service intervals.
Oil change in the drive (every 200 hours)
IGNITION SYSTEM
CHECKS AND SERVICE
CARBURATOR
Adjusting the carburetor for optimal engine operation and fuel economy.
CHECKING THE COOLING SYSTEM
Monitoring the coolant temperature gauge and checking the cooling system.
CHECKING AND REPLACING THE IMPELLER IN THE SEA WATER PUMP
ELECTRICAL SYSTEM
Reset button on fuse
Information about the automatic fuse and its reset button for electrical overload protection.
SERVICE IN CONNECTION WITH LAYING-UP AND LAUNCHING THE BOAT
INHIBITING WHEN LAYING UP FOR THE WINTER
Specific steps for long-term storage and winterization of the engine.
INHIBITING PROCEDURE
How to perform the inhibiting procedure while the boat is in the water.
Inhibiting to be carried out on land
PROCEDURE WHEN LAUNCHING
PROPELLERS, DP
Troubleshooting chart
Technical data
General
Basic technical specifications and data for the engine models.
Ignition System
Details on ignition system settings, timing, and components.
Electrical system
Information on voltage, battery, alternator, and starter motor specifications.
Tightening torques
Specified torque values for critical engine components and bolts.
WIRING DIAGRAM (AQ205A)
WIRING DIAGRAM (AQ211A, AQ231A, BB231A, BB261A)
WIRING DIAGRAM (AQ271C, AQ311B)
WIRING DIAGRAM, POWER TRIM
ENGINE COMPONENT GUIDE AQ205A
ENGINE COMPONENT GUIDE AQ211A, AQ231A
ENGINE COMPONENT GUIDE AQ271C, AQ311B

Table of Contents

Save PDF