Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
OPERATION AND MAINTENANCE MANUAL
MODELS PA, P1, P2, P2A and P4 Chimney System
MODELS SW, PA, P1, P2, P2A, P4, FG and SV Grease Duct System
A MAJOR CAUSE OF CHIMNEY RELATED FIRES
IS FAILURE TO MAINTAIN REQUIRED
CLEARANCES (AIR SPACES) TO COMBUSTIBLE
MATERIALS. IT IS OF UTMOST IMPORTANCE
THAT THIS CHIMNEY BE INSTALLED ONLY IN
ACCORDANCE WITH THESE INSTRUCTIONS.
IMPORTANT: DO NOT INSTALL CHIMNEY WITHOUT
FIRST READING THESE INSTRUCTIONS.
1
C
US
Advertisement
Table of Contents
Related Manuals for Schebler P1
Summarization of Contents
General
UL Listing USA and Canada
Details UL listing status for Schebler chimney models in the USA and Canada.
Chimney Applications
Describes suitable applications for Schebler chimney systems with various appliances and flue gas temperatures.
Termination Height Requirements
Specifies minimum termination height requirements for chimneys above roof penetrations and nearby structures.
Chimney Environment
Advises on chimney material selection for corrosive atmospheres and lists chemicals that can cause deterioration.
Clearances and Enclosures
Model SW Chimney Clearances
Provides required clearance distances for Model SW chimneys to combustible materials.
Model P1 UL 103 Chimney Clearances
Lists clearance requirements for Model P1 UL 103 chimneys to combustibles.
Model P1 UL 103HT Chimney Clearances
Details clearance requirements for Model P1 UL 103HT chimneys to combustibles.
Models P2 Chimney Clearances
Specifies clearance distances for Model P2 chimneys to combustible materials.
Model P2A Chimney Clearances
Outlines clearance requirements for Model P2A chimneys to combustibles.
Model PA Chimney Clearances
Provides clearance specifications for Model PA chimneys to combustible materials.
Model P4 Chimney Clearances
Lists required clearance distances for Model P4 chimneys to combustibles.
Limitations
Model PA Support Limits
Details maximum support heights for Model PA chimney sections using Support Plates and Wall Supports.
Model SW Support Limits
Provides maximum support heights for Model SW chimney sections using Support Plates and Wall Supports.
Model P1 Support Limits
Lists maximum support heights for Model P1 chimney sections using Support Plates and Wall Supports.
Limitations (Continued)
Model P2 Support Limits
Specifies maximum support heights for Model P2 chimney sections using Support Plates and Wall Supports.
Model P4 Support Limits
Details maximum support heights for Model P4 chimney sections using Support Plates and Wall Supports.
Model P2A Support Limits
Outlines maximum support heights for Model P2A chimney sections using Support Plates and Wall Supports.
General Installation Guidelines
Grease Duct Systems Sealant
Specifies the use of S-2000 joint sealant for grease duct systems.
Basic Pipe and Fitting Assembly
Joint Sealant
Details sealant types (S600, S2001, S2000) for flue gas temperatures and grease duct applications.
Thermal Expansion
Adjustable Lengths (18AL, 22AL, 30AL, 45AL)
Explains the function of adjustable lengths for compensating thermal expansion and making up odd lengths.
Engine Exhaust Installation
Installation Considerations
Covers joint sealant, expansion, vibration isolation, and support requirements for engine exhaust.
System Design and Layout
Discusses section choices, system routing, and manifold system guidelines for engine exhaust.
Operating Precautions
Creosote and Soot
Discusses creosote formation, the risk of chimney fires, and the need for regular inspection and cleaning.
Maintenance
Chimney and Exhaust Systems
Outlines inspection, cleaning, and repair procedures for chimney and exhaust systems.
Schebler Listed Grease Duct
Directions for Installation, Operation and Maintenance
Comprehensive instructions for Schebler grease duct systems in commercial and institutional food cooking equipment.
Advantages and Features
Covers benefits like dual-wall protection, quality, ease of installation, airflow, weight, and thermal expansion.
Applications and Slope
Details system applications and specifies minimum slope requirements for horizontal runs.
Need help?
Do you have a question about the P1 and is the answer not in the manual?
Questions and answers