Running Recording Program; Audio Communication - Bosch NBC-225-P Installation And Operation Manual

84 en | Operation via the browser
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1.
2.
Play back saved video sequences using the Player from
Bosch Security Systems.
7.1.7

Running recording program

The hard drive icon below the camera images on the Livepage
changes during an automatic recording.
The icon lights up and displays a moving graphic
indicate a running recording. If no recording is taking place, a
static icon is displayed.
7.1.8

Audio communication

Audio can be sent and received via the Livepage if the active
monitor and the remote station of the camera support audio.
1.
2.
All connected users receive audio signals sent from the camera
but only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
AR18-09-B003 | v1.1 | 2010.05
Click the recording icon
– Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
Click the recording icon again to stop recording.
Press and hold the F12 key to send an audio signal to the
camera.
Release the key to stop sending audio.
Installation and Operation Manual
IP Camera 200 Series
to record video sequences.
Bosch Security Systems
to