Table of Contents
Advertisement
Quick Links
- 1 Table of Contents
- 2 Figure 5.1-6 Ci3000 + Power Component Configuration Guide
- 3 Figure 5.1-7 Ci4000 Power Component Configuration Guide
- 4 Figure 5.1-8 Ci5000 Power Component Configuration Guide
- 5 Figure 5.2-2 Ci4000 Xenon Lamp Circuit
- 6 Figure 5.3-1 Humidification System Plumbing Diagram
- Download this manual
Advertisement
Table of Contents
Related Manuals for Atlas Weather-Ometer Ci4000
Summarization of Contents
1.0 INTRODUCTION
Additional Questions
Provides contact information for further assistance and troubleshooting.
5.0 TROUBLESHOOTING PROCEDURES
5.2 Xenon Lamp and Irradiance Control Malfunctions
Details malfunctions related to the xenon lamp and irradiance control systems.
5.2.1 Description
Explains the components and operation of the xenon lamp and irradiance control systems.
5.2.2 Troubleshooting Guide
Provides a guide to troubleshoot common lamp and irradiance malfunctions.
5.2.3 Troubleshooting Flow Chart - Lamp Ignition Failure
A flowchart to diagnose and resolve lamp ignition failures.
5.2.4 Troubleshooting Flow Chart - Irradiance High or Low
A flowchart for troubleshooting high or low irradiance levels.
5.2.5 Troubleshooting Flow Chart - 2-Sun Irradiance Considerations (Ci5000 only)
A flowchart to address 2-Sun irradiance issues specific to the Ci5000 model.
5.2.6 Troubleshooting Procedure – Lamp Ignition Failure (Ignitor)
Detailed procedure for troubleshooting lamp ignition failures related to the ignitor.
5.2.7 Troubleshooting Procedure – Irradiance Low or High (Wattage Regulator)
Procedure for troubleshooting irradiance issues caused by the wattage regulator.
5.2.8 Troubleshooting Procedure – 2-Sun Irradiance Considerations
Procedure to troubleshoot 2-Sun irradiance failures, including relay and speed control issues.
8.0 REPAIR & REPLACEMENT PROCEDURES
8.2 Sensor Replacement (cont.)
Details the process of replacing various sensors in the instrument.
8.2.7 Light Monitor Photodiodes
Instructions for replacing light monitor photodiodes, including part numbers and guidelines.
8.2.8 Chamber Overtemperature Thermostat
Procedure for replacing the chamber overtemperature thermostat.
8.2.9 Chamber Overtemperature Sensor (Older Ci4000 only)
Instructions for replacing the chamber overtemperature sensor on older Ci4000 models.
Need help?
Do you have a question about the Weather-Ometer Ci4000 and is the answer not in the manual?
Questions and answers