Related Manuals for Sonics VCX500
Summarization of Contents
PRINCIPLES OF OPERATION
Relationship of Amplitude and Wattage
Discusses how amplitude and wattage relate to processing power and sample characteristics.
DESCRIPTIONS OF COMPONENTS / FUNCTIONS OF CONTROLS
5.1. VCX750/VCX500 FRONT PANEL
Details the components and controls located on the front panel of the VCX750/VCX500.
5.2. VCX750/VCX500 REAR PANEL
Details the connectors and components found on the rear panel of the VCX750/VCX500.
5.3. FUNCTIONS OF KEYS CONTROLS AND CONNECTORS
Explains the function of each key, control, and connector on the processor's front and rear panels.
5.4. CONVERTER CLAMPING
Provides instructions and visual guides on the correct and incorrect methods for clamping the converter.
OPERATING INSTRUCTIONS
7.1. CAUTION
Lists critical cautions and warnings to observe during operation to prevent damage or injury.
7.2. SETUP
Provides step-by-step instructions for setting up the ultrasonic processor before use.
7.3. OPERATION
Details the procedures for operating the ultrasonic processor, including setting parameters and running cycles.
TECHNIQUES FOR OPTIMIZING RESULTS
Probe Size vs. Sample Volume
Explains the relationship between probe tip diameter and optimal sample volume for efficient processing.
MAINTENANCE
9.1. PROBE MAINTENANCE
Describes the proper procedures for maintaining the probe, including cleaning and checking for wear.
9.2. ATTACHING AND DETACHING PROBES AND MICROTIPS
Provides step-by-step instructions with visuals for attaching and detaching probes and microtips.
9.3. SYSTEM CLEANING INSTRUCTIONS
Details the recommended methods for cleaning the ultrasonic processor system components.
TROUBLESHOOTING
10.1. OVERLOAD CONDITION
Explains how to identify and address an overload condition displayed on the processor screen.
RETURN OF EQUIPMENT
11.1. SAFETY CERTIFICATION FORM
Details the requirement for a safety certification form when returning equipment for service.
CONVERTER COOLING
Converter Cooling Setup
Guides users through the process of attaching air cooling hoses to the converter for thermal management.
Need help?
Do you have a question about the VCX500 and is the answer not in the manual?
Questions and answers