Table of Contents
Advertisement
Supplementary Sheet
Functions and Handling of Safety Accessories
Document ID
ENU 1191 14 04
Abstract
This document describes the functions and handling of the following accessories:
-
SAA1 Beeper Dongle
-
SAA2 Warning Lamp
-
SAA3 3-Position Remote Safety Switch
-
CP Strobe Warning Lamp
It includes the designated use, information about the compatibility with different main devices as well as
operation, connection, disconnection and cleaning instructions. Furthermore, the technical data for each
accessory can be found in the corresponding chapter.
Advertisement
Table of Contents
Related Manuals for Omicron SAA2
Summarization of Contents
Functions and Handling of Safety Accessories
Abstract
Summarizes the document's content and the accessories covered.
Using this Supplementary Sheet
Provides guidance on how to effectively use the Supplementary Sheet.
Safety Symbols Used
Explains symbols indicating safety instructions for avoiding hazards.
Safety Instructions
Operator Qualifications
Defines required skills and responsibilities for operating OMICRON test systems and accessories.
Safety Standards and Rules
Outlines safety standards, regulations, and five key safety rules for safe operation.
Operating the Measurement Setup
Provides crucial instructions for safe operation of measurement setups with accessories.
Orderly Measures
Specifies requirements for documentation availability and user responsibilities.
Disclaimer and Related Documents
Lists disclaimers on equipment use and related manuals for further information.
Compliance Statement and Recycling
Declares adherence to EU directives and provides instructions for proper disposal.
Connecting with Main Devices
Cascadability
Details allowed combinations for daisy-chaining Safety Accessories per safety output.
Safety Connector Dongle Usage
Explains the function and proper use of safety connector dongles for main devices.
SAA1 Beeper Dongle
Designated Use
Describes the SAA1 Beeper Dongle's function and compatible main devices.
Operation
Explains how to operate the SAA1 Beeper Dongle, including its active state.
Connection
Provides step-by-step instructions for connecting the SAA1 Beeper Dongle to a main device.
Testing
Details the procedure to test the SAA1 Beeper Dongle's functionality.
Disconnection and Cleaning
Guides on safely disconnecting and cleaning the SAA1 Beeper Dongle.
Technical Data
Lists technical specifications, climate data, mechanical data, and standards conformity for the SAA1 Beeper Dongle.
SAA2 Warning Lamp
Designated Use
Describes the SAA2 Warning Lamp's purpose and its components.
Operation
Explains the operation of the SAA2 Warning Lamp system, including control unit and signal lamps.
Connection
Provides step-by-step instructions to connect the SAA2 system to the main device.
Testing
Details the testing procedure for the SAA2 Warning Lamp system, including emergency button activation.
Disconnection and Cleaning
Guides on safely disconnecting and cleaning the SAA2 Warning Lamp.
Technical Data
Lists technical specifications for the SAA2 Warning Lamp control unit, including climate and mechanical data.
Signal Lamps Technical Data
Lists technical specifications, climate data, and mechanical data for the SAA2 Warning Lamp signal lamps.
SAA3 3-Position Remote Safety Switch
Designated Use
Describes the SAA3's function as an emergency switch for OMICRON test systems.
Operation
Explains the three operating positions of the SAA3 3-Position Remote Safety Switch.
Connection
Provides step-by-step instructions for connecting the SAA3 3-Position Remote Safety Switch to the main device.
Testing
Details the testing procedure for the SAA3 3-Position Remote Safety Switch functionality.
Disconnection and Cleaning
Guides on safely disconnecting and cleaning the SAA3 3-Position Remote Safety Switch.
Technical Data
Lists technical specifications, mechanical durability, climate, and mechanical data for the SAA3 3-Position Remote Safety Switch.
CP Strobe Warning Lamp
Designated Use
Describes the CP Strobe Warning Lamp's function and compatibility with OMICRON test systems.
Operation
Explains the operational states of the CP Strobe Warning Lamp and their meanings.
Connection
Provides step-by-step instructions for connecting the CP Strobe Warning Lamp to the main device.
Testing
Details the testing procedure for the CP Strobe Warning Lamp functionality.
Disconnection and Cleaning
Guides on safely disconnecting and cleaning the CP Strobe Warning Lamp.
Technical Data
Lists technical specifications, climate data, mechanical data, and standards conformity for the CP Strobe Warning Lamp.
Support
24/7 Technical Support
Information on obtaining technical support via hotline and website.
Customer Portal
Access to software updates, knowledge base, and user forum on the customer portal.
OMICRON Academy
Information on training courses and product learning offered by OMICRON Academy.
Need help?
Do you have a question about the SAA2 and is the answer not in the manual?
Questions and answers