Add Device - TP-Link TL-PA201 User Manual

TL-PA201 200Mbps Ethernet Powerline Adapter
Note:
The Ethernet Powerline Adapter device must be present on the power line (plugged in) in order for
the password to be confirmed and added to the network. If the Ethernet Powerline Adapter device
could not be located, a warning message will be shown.

4.1.3 Add Device

The following dialog box pop-up when clicking the "Add" button under Main configuration homepage.
The dialog box allows you to enter both the selected device's name and password. Noted that the
Ethernet Powerline Adapter must be present on the power grid in order to activate the set password and
added to the local network.
Enter your Device Name and Password (Take note to the password format) and click "OK" after setup.
The following screen display after the naming and password setting process, which is also the
Diagnostics configuration homepage.
11