Table of Contents
Advertisement
Quick Links
Professional Shop Manual
900 Series Riding Tractors
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals.
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperi-
enced individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all
instructions and use common sense when working on power equipment. This includes the contents of the product's Oper-
ators Manual, supplied with the equipment. No liability can be accepted for any inaccuracies or omission in this publication,
although care has been taken to make it as complete and accurate as possible at the time of publication. However, due to
the variety of outdoor power equipment and continuing product changes that occur over time, updates will be made to these
instructions from time to time. Therefore, it may be necessary to obtain the latest materials before servicing or repairing a
product. The company reserves the right to make changes at any time to this publication without prior notice and without
incurring an obligation to make such changes to previously published versions. Instructions, photographs and illustrations
used in this publication are for reference use only and may not depict actual model and component parts.
MTD Products Inc. - Product Training and Education Department
© Copyright 2008 MTD Products Inc. All Rights Reserved
FORM NUMBER - 769-04590A
4
02/2009
Advertisement
Chapters
Table of Contents
Related Manuals for Cub Cadet SLTX1050
Summarization of Contents
Cub Cadet 900 Series Introduction
Professional Shop Manual Intent
Defines the purpose of the manual for service dealers and technicians, emphasizing its supplemental nature.
Fasteners and Torque Specifications
Details fastener types, sizes (fractional and metric), and torque specifications for assembly procedures.
Assembly Instructions
Explains how torque specifications and assembly details are presented for ease of use and safety.
Description of the 900 Series Tractor
Introduces the 900 series tractor platform, highlighting new features and design changes from previous models.
Model and Serial Number Identification
Explains how to locate and interpret tractor model and serial number tags for identification.
Cub Cadet Engine Related Parts Service
Muffler Removal and Replacement
Provides step-by-step instructions for removing and replacing the tractor muffler assembly.
Fuel Tank Removal and Replacement
Details the procedure for safely removing and replacing the fuel tank, including precautions for handling gasoline.
Cub Cadet Steering System Service
Steering Alignment Procedure
Explains how to check and adjust front tire alignment for proper tracking and vehicle stability.
Axle Removal and Installation
Guides the technician through the process of removing and installing the front axle assemblies.
Steering Gear and Pinion Gear Service
Details the procedure for removing and replacing the steering gear and pinion gear components.
Steering Shaft and Hex Bushing Replacement
Provides instructions for removing and replacing the steering shaft and its associated hex bushing.
Pivot Bar Service
Outlines the procedure for removing and installing the pivot bar, including lubrication and alignment checks.
Cub Cadet Body Panels Service
Hood Removal and Components
Covers the removal of the tractor hood and its components like headlights and grille.
Seat and Fender Service
Details the removal and service of the tractor seat and fender panels.
Seat Removal Procedure
Step-by-step instructions for safely removing the tractor seat, including safety switch disconnection.
Battery Removal and Tray Service
Explains the process of removing the tractor battery and its tray for access to service points.
Dash Panel Removal
Provides instructions for removing the dash panel to access linkages and electrical components.
Cub Cadet Hydro Drive and Brake System
Externally Repairable Drive System Problems
Guides technicians in diagnosing common drive system issues like low power or ground speed.
Brake Adjustment Procedure
Details the steps for testing and adjusting the tractor's brake system for proper function.
Neutral Control Adjustment
Explains how to adjust the neutral control linkage to ensure proper neutral positioning.
Drive Belt Replacement
Provides comprehensive instructions for replacing the drive belt, including safety precautions.
Changing Transaxle Hydraulic Fluid
Describes the procedure for draining and refilling the transaxle with hydraulic fluid.
Cub Cadet CVT Drive and Brake System
About the Variable Speed Drive System
Explains the operation of the CVT system, including its two drive belts and pulley mechanisms.
Externally Repairable Drive System Problems
Guides diagnosis of issues like low power, ground speed, or brake dragging in CVT systems.
Drive Belt Replacement (CVT)
Provides detailed steps for replacing the upper and lower drive belts in the CVT system.
Transaxle Removal and Replacement (CVT)
Details the procedure for removing and reinstalling the transaxle in CVT-equipped tractors.
Cub Cadet Electrical System Service
Precautions for Electrical Work
Highlights essential safety precautions before disconnecting or working on electrical components.
RMC Module Overview
Describes the RMC module's function in controlling tractor operations and safety circuits.
Key Switch Operation and Testing
Explains the function of the key switch in various positions and provides diagnostic steps.
RMC Module Plug Test (Electric PTO)
Details how to perform a plug test to diagnose the RMC module and associated circuits.
Testing Switches
Provides methods for testing various switches using continuity tests and understanding their states.
Schematics
Includes wiring diagrams for electric PTO and manual PTO systems for diagnostic reference.
Cub Cadet Cutting Decks and Lift Shaft Service
Deck Removal Procedure
Step-by-step guide for removing the tractor cutting deck, including PTO belt detachment.
Blade Service and Sharpening
Details how to inspect, sharpen, balance, and replace cutting blades for optimal cut quality.
Spindle Pulley Replacement
Instructions for replacing the pulley on a spindle assembly, including bearing inspection.
Deck Lift Shaft Assembly Bushings
Explains how to replace the bushings in the deck lift shaft assembly without removing the shaft.
Deck Lift Links and Cables Service
Covers the service and replacement procedures for deck lift links and cables.
Cub Cadet Maintenance Intervals
Lubrication Points and Intervals
Provides recommended lubrication points, intervals, and grease types for tractor maintenance.
Engine Maintenance Schedule
Outlines recommended maintenance intervals for engine components like spark plugs and filters.
Spark Plug Service
Details how to check, clean, gap, and replace spark plugs for optimal engine performance.
Air Filter and Foam Pre-Cleaner
Explains the importance of clean air filters and how to service them for engine efficiency.
Oil Change Procedure
Provides instructions for changing engine oil, including recommended oil type and intervals.
Fuel Filter Replacement
Details the procedure for replacing the fuel filter to ensure proper fuel delivery.
Hydro-Gear Section 1: Description and Operation
Introduction to the IHT Transaxle
Provides an overview of the Hydro-Gear Integrated Hydrostatic Transaxle (IHT) and its service manual.
General Description of the 310-0510
Describes the 310-0510 transaxle as a self-contained unit for power transfer and control.
Hydraulic Schematic and Flow Illustration
Presents the hydraulic schematic and flow illustration for understanding the transaxle's oil circuit.
Technical Specifications
Lists key technical specifications for the 310-0510 IHT transaxle, including reduction and speeds.
Hydro-Gear Section 2: Safety
Personal Safety Precautions
Details essential personal safety measures to be observed during servicing and repair operations.
Servicing Safety Considerations
Addresses safety procedures specific to servicing, like disabling the vehicle and using approved solvents.
Hydro-Gear Section 4: Service and Maintenance
External Maintenance Checks
Outlines regular external maintenance tasks for the transaxle, including fluid levels and belt inspection.
Fluid Specifications and Level
Provides information on recommended fluids, volumes, and checking the fluid level in the transaxle.
Purging Procedures
Details the critical procedures for purging air from the hydrostatic system after maintenance.
Hydro-Gear Brake Maintenance
Brake Setting Adjustment
Explains how to adjust the brake setting using the castle nut and feeler gauge.
Friction Pack Adjustment
Details how to adjust the friction pack nut for desired drag or holding force on the control lever.
Hydro-Gear Section 5: Repair
How to Use This Section
Guides users on how to navigate the repair section, including exploded views and part references.
Transaxle Removal for Repair
States the necessity of removing the transaxle from the vehicle before performing repair procedures.
Limited Disassembly Guidelines
Advises disassembling only as far as necessary for repairs, with corresponding assembly procedures.
Hydro-Gear Seal Kit Replacement
Axle Seal Replacement
Details the procedure for removing and installing axle seals, including lubrication and shaft protection.
Brake Seal Replacement
Provides instructions for replacing the brake seal and its associated retaining ring.
Hydro-Gear Hydraulic Components
Pump Block Disassembly
Step-by-step guide for disassembling the pump block assembly, including piston and spring checks.
Motor Block Assembly
Details the assembly of the motor block, including checking piston operation and bore wear.
Hydro-Gear 310-0710 Transaxle Overview
Description of 310-0710
Describes the 310-0710 transaxle as an upgrade to the 310-0510 with key feature differences.
310-0710 Transaxle Removal
Outlines the procedure to prepare the 310-0710 transaxle for removal from the vehicle.
Need help?
Do you have a question about the SLTX1050 and is the answer not in the manual?
Questions and answers