Related Manuals for Eaton MTL GECMA
Summarization of Contents
General Reference
Different Firmware Versions
Details the various firmware versions available for the RT series products.
Compatibility
Explains compatibility between different firmware versions and hardware.
Introduction
Name Agreement
Defines terms like Console module and PC module used in the manual.
General Remarks on Firmware Updates
Discusses the two methods of firmware update: Direct and Automatic.
Requirements for Direct Update
Lists the necessary prerequisites for performing a direct firmware update.
Direct Update Variants Overview
Details firmware update paths for direct updates based on starting and target versions.
Firmware Revision Update Path
Explains the necessary transitional update steps for specific firmware revision paths.
Implementation
Determine Current Firmware Version
Guides on how to check the currently installed firmware version on the devices.
How to Perform a Direct Update
Direct Update Checkout
Procedure to verify the successful firmware update by checking the setup menu and displayed versions.
Automatic Update
Requirements for Automatic Update
Lists the necessary conditions and firmware versions for enabling the automatic update feature.
Preparation for Automatic Update
Outlines the general procedure to prepare devices for an automatic firmware update.
How to Perform a Network Update
Network Update Confirmation
Confirms the firmware update by checking the main menu for the new firmware version.
How to Perform an Automatic Update
Scenario 1: SATU New, Terminal Old
Procedure for automatic update when SATU has new firmware and terminal has old firmware.
Scenario 2: Terminal New, SATU Old
Procedure for automatic update when terminal has new firmware and SATU has old firmware.
Appendix
VGA to DVI Signal Switching
Instructions on switching video mode from VGA to DVI for optimal update performance.
VGA/DVI Switching for Older Versions
Details how to adjust video mode settings for older firmware versions (1242-127x) during updates.
VGA/DVI Switching for 43xx Versions
Explains how to configure video mode settings for firmware versions 43xx.
Possible Errors and Troubleshooting
Lists common errors encountered during firmware updates and provides troubleshooting steps.
Need help?
Do you have a question about the MTL GECMA and is the answer not in the manual?
Questions and answers