ROSE DISPLAYS ROPOLE-OMNI HEAD Instructions

Omni RoPole
RoPole
Omni
head
Hook
Clip
Sign
Holder
The OneUp and the RoPole are patented and registered trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of these products. Part #99 INSOmniRopole
Inception 7/99
®
Instructions
Omni RoPole Sign
Hanging Instructions
SIDE HOOKS

To install

1. Assemble sign with clips and top and bottom
holders.
2. Attach regular hooks (2) to each clip in the top
holder of the sign. Hook them over the side hooks
on the Omni Head (see illustration).
3. Raise the RoPole to the ceiling. Loop the
regular hooks through the previously installed
eye-hooks on the ceiling, one side at a time.

To remove

Simply reverse the steps above.

Please Note

Sign assembly pictured above does not exactly match
signware kit provided. It is important that the metal
sign hanging hook be looped over the Omni head
side hooks for proper installation.
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com