Advertisement
Quick Links
Acoustic Fans
Single
In-line Duct Fan Range (QP)
Installation and Wiring Instructions
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING
INSTALLATION.
THESE INSTRUCTIONS SHOULD BE LEFT WITH THE END USER.
QP100C
QP125C
QP150C
QP160C
QP200C
QP250C
QP315C
QP400C
QP500C
Advertisement
Related Manuals for Vent-Axia QP200C
Summarization of Contents
Fan Mounting
Duct Run Guards
Guards are required for short duct runs terminating close to the fan (within 1.5m).
Mounting Flexibility
The fan can be mounted in a variety of ways and at any angle to suit the application.
Installation Accessories
Accessories are available to assist installation, including flexible connectors and mounting feet.
Fixing Methods
Details on using fixing brackets, clearance holes for rods, and specific methods for larger fan sizes.
General Wiring Instructions
Qualified Electrician
All electrical connections must be made by a properly qualified electrician.
Safety Compliance
Fit an all-pole isolator switch and ensure correct thermal protection and earth connections.
Power Supply Connection
Connect power supply via cable gland, using appropriate controls and cable size.
Circuit Connection Caution
Avoid supplying through external switching devices to prevent thermal cut-out hazard.
Operational Notes and Responsibilities
Pre-Run Checks
Verify wiring, fixings, guards, protection devices, terminal covers, and earth connections.
Installer Responsibility
Installers are responsible for safe, secure, and compliant installation according to requirements.
Routine Maintenance
Inspect and clean fans periodically, taking care not to damage impeller assembly.
Need help?
Do you have a question about the QP200C and is the answer not in the manual?
Questions and answers