Advertisement
Quick Links
PROGRAMME DU MITIGEUR POUR LA SALLE DE BAIN
PROGRAMA MEZCLADORES BAÑO
Art. 58090
Art. 58092
Art. 58094
Art. 58190
Art. 58192
13037 Serravalle Sesia (Vercelli) - Italy
Phone +39 0163 454111 - Facsimile +39 0163 459273
www.gessi.com - gessi@gessi.it
BATH MIXING PROGRAM
Art. 58194
Art. 58390
Art. 58392
Art. 58393
Art. 58394
Gessi SpA - Parco Gessi
Advertisement
Related Manuals for Gessi INCISO 58190
Summarization of Contents
Safety Warnings
General Pressure and Temperature Limits
Specifies maximum/minimum working pressure and temperature for Gessi products.
Product Usage Restrictions
Warns against using the product as a tool or for unintended purposes.
Professional Installation and Code Compliance
Emphasizes professional installation and adherence to local plumbing codes.
Electrical and Physical Hazard Warnings
Warns against attaching electric cables and placing heavy objects on the product.
Installation Force and Fittings Caution
Advises avoiding excessive force and aluminum fittings during installation.
Pre-Installation Information
Product Dimensions: Art. 58090 and Art. 58092
Provides detailed dimensions and diagrams for Art. 58090 and Art. 58092 products.
Product Dimensions: Art. 58190 and Art. 58192
Provides detailed dimensions and diagrams for Art. 58190 and Art. 58192 products.
Product Dimensions: Art. 58094 and Art. 58194
Provides detailed dimensions and diagrams for Art. 58094 and Art. 58194 products.
Product Dimensions: Art. 58390 and Art. 58392
Provides detailed dimensions and diagrams for Art. 58390 and Art. 58392 products.
Product Dimensions: Art. 58393 and Art. 58394
Provides detailed dimensions and diagrams for Art. 58393 and Art. 58394 products.
Installation Preparation and Technical Data
Details pipe rinsing, technical specs on working pressure, and recommended settings.
Installation Tools Required
Lists the necessary tools for the installation process, including an Allen wrench.
Package Contents Overview
Details the components included in the product package, labeled A through F.
Installation Procedures
Initial Component Fitting (Figures 1-3)
Illustrates initial fitting of components, tool usage, and basic assembly.
Component Attachment and Placement (Figures 4-6)
Continues the installation process with component attachment and final placement.
Handle and Spout Installation (Figures 7-9)
Details the installation of handles and spout, including alignment considerations.
Control Handle Alignment Procedure (Figures 10-12)
Provides detailed instructions and visual guidance for aligning control handles correctly.
Handle Alignment Steps (Figures 13-18)
Illustrates handle alignment steps from Figures 13 to 18, including 90° and 18° checks.
Internal Component Installation (Figures 19-21)
Shows the installation of internal components and parts as depicted in Figures 19-21.
Handle Alignment Warning and Correction
Provides a critical warning regarding handle alignment and steps to correct it if misaligned.
Product Operation
Hot and Cold Water Control
Illustrates the basic operation of the mixer, indicating hot and cold water flow direction.
Maintenance and Support
Component Replacement and Service
Advises contacting authorized retailers or qualified staff for component replacement and maintenance.
Handle and Cartridge Maintenance
Shows steps for maintaining or replacing the handle and internal cartridge using specific tools.
Aerator Cleaning and Replacement
Provides instructions on how to clean or replace the aerator if the water flow is not fluid.
Specific Aerator Maintenance (Models 58094-58194)
Details aerator cleaning/replacement for specific models, emphasizing gasket care and correct reassembly.
Need help?
Do you have a question about the INCISO 58190 and is the answer not in the manual?
Questions and answers