Cleaning And Maintenance - Vanguard VP11 Owner's Operation And Installation Manual

CLEANING
AND
MAINTENANCE
16
BURNER FLAME PATTERN
Figure 19 shows a correct burner flame pattern. Figure 20 shows an incorrect
burner flame pattern.
Figure 19 - Correct Burner Flame Pattern (Model VP11 Shown)
Figure 20 - Incorrect Burner Flame Pattern (Model VP11 Shown)
If burner flame pattern is incorrect, as shown in Figure 20
• turn heater off (see TO TURN OFF GAS TO APPLIANCE, page 15)
• see TROUBLESHOOTING, pages 17 through 20
Turn off heater and let cool before cleaning.
You must keep control areas, burner, and circulating air
passageways of heater clean. Inspect these areas of heater
before each use. Have heater inspected yearly by a qualified
service person. Heater may need more frequent cleaning due to
excessive lint from carpeting, bedding material, etc.
ODS/PILOT AND BURNER ORIFICE
• Use a vacuum cleaner, pressurized air, or small, soft bristled brush to clean.
CABINET
Air Passageways
• Use a vacuum cleaner or pressurized air to clean.
Exterior
• Use a soft cloth dampened with a mild soap and water mixture. Wipe the
cabinet to remove dust.
!
WARNING
WARNING ICON G 001
!
CAUTION
WARNING ICON G 001