Related Manuals for BRAMIDAN X16
Summarization of Contents
2 Conditions
Explanation of Symbols
Defines and explains the meaning of symbols used in the manual for safety and operational guidance.
4 Use and Function
Bale Size Configuration
Details how the bale size is set and can be changed, with instructions to contact the dealer for modifications.
5 Transport
Secure Lashing Procedures
Provides instructions and warnings on how to securely lash the baler during transport using brackets or oval holes.
Side Placement and Forklift Transport
Avoiding Side Placement Risks
Instructions on how to safely handle the baler if it must be placed on its side to prevent oil leakage.
Forklift Transport Guidelines
Guidance for safe transport using a forklift, emphasizing avoiding damage and maintaining proper height.
Crane Transport and Moving Procedures
Safe Crane Lifting
Details how to hook lifting gear for safe transport using a crane, specifying attachment points.
Moving an Installed Baler
Steps for moving an installed baler, including emptying the chamber and lowering the platen for stability.
6 Installation
Installation Location Guidelines
Advises on suitable locations for the baler, considering environmental factors like dryness, stability, and protection from precipitation.
Electrical Connection Procedures
Single Phase Motor Connection
Instructions for safely connecting a single-phase motor, emphasizing secure supply network and socket checks.
Three Phase Motor Connection
Guidance for connecting a three-phase motor, including checking rotation direction and phase inverter adjustments.
8 Operating Principles
Power Interruption Handling
Explains how to reset the baler after a power interruption, detailing the use of start and finish indicator buttons.
Emergency Stop Procedure
Describes how to deactivate and reset the baler after the emergency stop button has been activated.
Start Button Operation
Explains the requirement to open and close the filling door to activate the start button between press cycles.
Two-Hand Control Mechanism
Details the requirement for simultaneous constant pressure on two buttons for a specific time interval for operation.
Troubleshooting Blocked Bale Ejection
Advises on checking for jammed materials in the ejection system and ensuring the mechanism is forward.
Steel Wire Holder Usage
Notes that some models require steel wire holders for using steel wire for binding.
9 The Operating Panel
Operating Panel Description
Identifies and labels the components of the operating panel for both B-series and X-series balers.
Push Button Light Signal Guide
Explains how the illuminated or flashing buttons on the operating panel guide the operator through different phases.
10 Mounting Cords, Straps, or Steel Wire
Mounting Cords and Straps
Step-by-step instructions for mounting cords and straps using brackets and ensuring proper placement for binding.
11 Filling and Compression
Waste Distribution During Filling
Guidance on filling the chamber with material and distributing it evenly for effective compression.
Compression Cycle Operation
Explains the compression process, including the role of the filling door switch and the platen parking at maximum compression.
12 Binding
Binding with Cords or Straps
Details the process of binding the bale using cords or straps after compression, including opening doors and securing loops.
14 Maintenance
Daily Maintenance Checks
Lists essential daily checks to ensure the baler is clear of obstructions and the ejection mechanism is functional.
Weekly Maintenance Checks
Outlines weekly checks for safety features like the emergency stop, door interlocks, and component integrity.
15 Troubleshooting
Troubleshooting: Baler Cannot Start
Provides a checklist for diagnosing why the baler cannot start, covering power, switches, and fuses.
16 Checklist for Safety Check
Safety Check: Cable and Socket
Visually inspects the supply cable and socket for cracks or defects to ensure electrical safety.
Safety Check: Repair Switch
Verifies the repair switch functions correctly, including its ability to be locked in the 'OFF' position.
Safety Check: Emergency Stop
Tests the emergency stop button by activating and deactivating it to ensure the baler stops immediately.
Safety Check: Two-Hand Control
Tests the two-hand control mechanism to ensure the baler starts bale ejection only with simultaneous button presses.
Need help?
Do you have a question about the X16 and is the answer not in the manual?
Questions and answers