Related Manuals for HIGHLEAD GC0618-1 D2
Summarization of Contents
Precautions Before Starting Operation
Safety Precautions
General safety rules to follow before operating the sewing machine.
Pre-Operation Checks
Specific checks and actions required before initial machine operation.
Operating Conditions
Guidelines on environmental conditions suitable for machine use.
Preparation and Lubrication
Machine Cleaning and Examination
Instructions for cleaning the machine and performing pre-use checks.
Lubrication Procedures
Detailed steps for lubricating the machine, including the rotating hook and adjustment.
Needle Replacement and Bobbin Winding
Replacing Sewing Needles
Step-by-step instructions for correctly installing a sewing machine needle.
Bobbin Winding and Tension
Guide on winding thread onto the bobbin and adjusting winding tension.
Bobbin Handling and Threading
Bobbin Removal and Insertion
Detailed procedure for removing and inserting the bobbin and case.
Machine Threading Guide
Step-by-step guide for threading the sewing machine, including picking up bobbin thread.
Thread Tensions and Pressure Adjustment
Regulating Thread Tensions
How to adjust upper and lower thread tensions for optimal stitch quality.
Adjusting Material Pressure
How to adjust the pressure exerted by the presser feet on the material.
Presser Feet and Stitch Adjustments
Presser Feet Lift Adjustment
Adjusting the lift height of the presser feet for different materials.
Stitch Length and Reversing Lever
How to set stitch length and use the reversing lever.
Feed Dog Height Adjustment
Procedure to set the correct height of the feed dog.
Feed Dog and Needle Positioning
Feed Dog to Needle Plate Alignment
Aligning the feed dog relative to the needle plate for accuracy.
Needle and Feed Dog Alignment Check
Checking and adjusting needle alignment with the feed dog hole.
Needle-Feed Dog Timing
Ensuring correct timing between needle and feed dog movements for stitch formation.
Needle Bar and Hook Timing
Needle Bar Height Adjustment
Adjusting the vertical travel of the needle bar.
Hook-Needle Timing
Aligning the hook with the needle for proper stitch formation.
Presser Feet Height Adjustment
Presser Bar Lifter Adjustment
Adjusting the presser bar lifter for presser foot height.
Alternating Presser Feet Lift
Adjusting the lift of alternating presser feet for correct height.
Feed Mechanism and Thread Control
Vibrating Presser Foot Timing
Ensuring correct timing of the vibrating presser foot relative to the feed dog.
Feed Forked Connection Clearance
Adjusting clearance in the feed mechanism for smooth operation.
Thread Controller Spring Adjustment
Adjusting the thread controller spring for proper thread tension and action.
Needle Bar Stop Position Adjustment
Adjusting 'UP' Position
Setting the upper stopping position of the needle bar.
Adjusting 'DOWN' Position
Setting the lower stopping position of the needle bar.
Knife Engagement Adjustment
Knife and Blade Positioning
Standard distances for positioning the cutting knives.
Adjusting Knife Engagement
Adjusting the engagement of the thread trimming blades.
Adjusting Knife Engaging Pressure
Adjusting the pressure for cutting thick threads.
Need help?
Do you have a question about the GC0618-1 D2 and is the answer not in the manual?
Questions and answers