Related Manuals for INOXPA M-440
Summarization of Contents
Generalities and Instructions
2.1. Instructions Manual
Manual content overview and important instructions.
2.2. Compliance with Instructions
Risks of non-compliance and consequences.
2.3. Warranty
Warranty conditions and manufacturer liability.
Safety Precautions
3.1. Warning Symbols
Explanation of safety hazard symbols used in the manual.
3.2. General Safety Instructions
Essential safety guidelines for installation, operation, and maintenance.
General Information and Application
4.1. Description
Overview of blender components and models.
4.2. Operating Principle
How the blender works, including venturi and impeller function.
4.3. Products to be Avoided
List of materials incompatible with blender operation.
Installation Procedures
5.1. Reception and Identification
Procedures for checking and identifying the blender upon delivery.
5.3. Transport and Storage
Guidelines for safely moving and storing the blender.
5.4. Location and Ventilation
Recommendations for optimal placement and ventilation.
Installation - Pipes and Systems
5.5. Pipes
Guidelines for installing suction and discharge pipes.
5.6. Pressurisation Tank
Installation requirements for cooled mechanical seals.
Electrical Installation
5.7. Electrical Installation
Instructions for connecting electric motors and safety precautions.
Start-up Procedures
6.1. Checks Before Starting
Pre-start checks for correct operation.
6.2. Checks When Starting
Post-start checks for noise, pressure, and leaks.
Troubleshooting Guide
Common Issues and Solutions
Solutions for common operational problems like motor issues, leaks, and suction failures.
Maintenance Overview
8.1. General Considerations
General principles and personnel qualifications for maintenance.
8.2. Mechanical Seal Checks
Procedure for inspecting mechanical seals for leaks.
8.3. Seal Maintenance
Guidelines for seal replacement, maintenance, and lubrication.
8.4. Tightening Torque
Specific torque values for fasteners.
Cleaning and Sterilization
8.6. Cleaning Procedures
Safety precautions and methods for cleaning the blender.
8.6.1. Automatic CIP
Procedures for automated cleaning processes.
8.6.2. Automatic SIP
Procedures for automated sterilization processes.
Disassembly and Assembly
8.7. Blender Disassembly/Assembly
General instructions for disassembly and assembly.
8.8. Housing and Impeller
Steps for disassembling housing and impeller.
Component Disassembly/Assembly
M-440 Housing and Impeller
Steps for disassembling M-440 housing and impeller.
M-226 Housing and Impeller Assembly
Steps for assembling M-226 housing and impeller.
M-440 Housing and Impeller Assembly
Steps for assembling M-440 housing and impeller.
Mechanical Seal Procedures
8.9. Single Mechanical Seal
Detailed disassembly and assembly for single mechanical seals.
8.10. Cooled Mechanical Seal
Detailed disassembly and assembly for cooled mechanical seals.
Cooled Mechanical Seal Assembly
M-226 Cooled Seal Assembly
Steps for assembling cooled seal for M-226.
M-440 Cooled Seal Assembly
Steps for assembling cooled seal for M-440.
Belt, Pulley, and Bearing Maintenance
8.11. Changing Belts and Pulleys
Instructions for replacing drive belts and pulleys.
8.12. Changing Bearings
Procedures for disassembling and assembling bearings.
Motor Replacement
8.13. Motor Replacement
Steps for replacing the motor on M-226 and M-440 models.
Technical Specifications - General
Blender Specifications
Motor, flow, materials, and seal specifications.
9.1. Weight
Weight specifications for M-226 and M-440 models.
Technical Specifications - Dimensions
9.2. Dimensions
Overall dimensions (A, B, C) for M-226 and M-440.
M-226 Blender - Exploded Drawing
9.3. Exploded Drawing
Visual breakdown of M-226 blender components with part numbers.
M-226 Blender - Technical Section
9.4. Technical Section and Parts List
Detailed technical view and parts list for M-226.
M-226 Parts List Details
Component Details
List of part positions, descriptions, quantities, and materials.
M-440 Blender - Exploded Drawing
9.5. Exploded Drawing
Visual breakdown of M-440 blender components with part numbers.
M-440 Blender - Technical Section
9.6. Technical Section and Parts List
Detailed technical view and parts list for M-440.
M-440 Parts List Details
Component Details
List of part positions, descriptions, quantities, and materials.
M-226 CP Blender - Exploded Drawing
9.7. Exploded Drawing
Visual breakdown of M-226 CP components with part numbers.
M-226 CP Blender - Technical Section
9.8. Technical Section and Parts List
Detailed technical view and parts list for M-226 CP.
M-226 CP Parts List Details
Component Details
List of part positions, descriptions, quantities, and materials.
Cooled Mechanical Seal Details
9.9. M-226 Cooled Seal
Exploded view and parts list for M-226 cooled seal.
9.10. M-440 Cooled Seal
Exploded view and parts list for M-440 cooled seal.
Need help?
Do you have a question about the M-440 and is the answer not in the manual?
Questions and answers