Related Manuals for JetCat RXi Series
Summarization of Contents
Safety Information and Precautions
Understanding Safety Symbols
Explains the meaning and importance of various safety symbols used in the manual.
Essential Safety Precautions
Provides critical warnings on operation, environment, personal safety, and model handling.
Quick Start Guide
Identify Components
Lists and illustrates all parts included in the turbine kit for easy identification.
Mounting the Turbine System
Mounting Turbine Accessories
Guides on positioning the battery, ECU, I/O board, and pump within the model.
Mounting the Turbine
Explains how to attach the turbine to the model using the provided mounting bracket.
System Connections Overview
Complete System Connection Diagram RX
Illustrates the electrical and fuel connections for the RX turbine system.
Fuel System Connections
Fuel Line Connections
Provides instructions for connecting fuel lines, securing tubing, and filter installation.
Hopper Tank and UAT
Explains the purpose and use of a hopper tank and recommends the BVM UAT.
Electrical Connections
Electrical Connections and Interconnections
Details wiring for throttle, AUX, pump, battery, and data connections.
Ground Support Unit (GSU) Operation
GSU Control Panel Overview
Describes the GSU display, buttons, and LED indicators for turbine monitoring.
Mini GSU Unit
Introduces the optional compact Mini GSU for model mounting and accessibility.
JetCat V10 ECU Setup
Switching the ECU On and Off
Details the procedure for powering the ECU on and off, including automatic shutdown.
Turbine Operation and Failsafe
Turbine Operation Modes
Explains single vs. two-channel operation for turbine control and features.
Setting Up Failsafe Mode
Describes the crucial failsafe feature for detecting radio failures and preventing accidents.
RC System Integration and Learning
Learn R/C Procedure
Guides on teaching the ECU the throttle and auxiliary channel positions from the RC system.
Fuel System Preparation
Verifying Failsafe Programming
Instructions to confirm the failsafe function is correctly set and operational.
Fueling On-Board Tanks
Advises on safely filling fuel tanks, noting potential pressure issues.
First Turbine Run Procedures
Priming Fuel Pump and System
Explains how to prime the fuel system, especially for non-RXI models.
Pre-Run Turbine Checklist
Essential checks before starting the turbine for the first time, including battery and safety.
Post-Stop Turbine Actions
Actions to take after stopping the turbine, including cooling and defueling.
Turbine Starting and Stopping
Automatic Cooling Process
Describes the automatic process of cooling the turbine after shutdown.
GSU Display Symbols and Screens
Initial Power-Up Display
Shows the default display screen after the ECU powers up.
Error Condition Display
Explains screens indicating potential errors or failsafe status.
Understanding Turbine Running States
Turbine Start-Up Display
Illustrates the GSU screen during the turbine ignition and start sequence.
Turbine Running Display
Shows the GSU screen when the turbine is operating normally.
Troubleshooting Common Issues
Error Causes and Remedies
Lists frequent problems, their likely causes, and recommended solutions for the turbine.
Diagnosing Unexpected Shutdowns
Analyzing Shutdown Data
Explains how to use saved data to determine the reason for engine flame-outs.
Smoker Valve and System
Smoker Valve Control
Explains how to configure and use the smoker valve for smoke fluid injection.
Smoke System Operation
Discusses injecting smoke fluid and switching between fuel and smoke pumps.
Navigating ECU Menus
Menu Structure and Selection
Outlines the organization of menus and methods for selecting them.
The RUN Menu Details
Explains the parameters and values displayed in the primary RUN menu.
ECU Menu Functions
Min/Max Diagnostic Menu
Describes the menu used for viewing minimum and maximum recorded operational values.
RC Check Menu
Details how to check RC input parameters like throttle and AUX channel positions.
Menu Functionality
Statistic-Menu Functions
Explains menu for viewing total run time, ignition success, and other operational statistics.
LIMITS Menu for Adjustments
Details parameters adjustable via the LIMITS menu, such as RPM and battery type.
Parameter Configuration
Parameter Configuration
Covers settings for smoke flow, warnings, fuel limits, AUX channel, and failsafe delays.
Turbine Start-Up Modes and Tests
Turbine Start-Up Modes
Describes different sequences for starting the turbine, including multi-engine setups.
TEST Menu Functions
Details tests for fuel pump, burner, valves, and sensor data readings.
Airspeed Sensor Setup and Parameters
Airspeed Sensor Connection Diagram
Shows how to connect the airspeed sensor's pitot tube and pressure lines to the ECU.
Airspeed Sensor Limits Menu Parameters
Explains parameters within the LIMITS menu related to airspeed control and regulation.
Special Functions and Adjustments
Temperature Sensor Adjustment
Explains the procedure for calibrating the temperature sensor after replacement.
Need help?
Do you have a question about the RXi Series and is the answer not in the manual?
Questions and answers