Using The Program Ae Mode - Contax 159MM Instruction Manual

tr Set the Shutter Control Dial to "P.
The camera is now ready for shooting in the Normal
Program AE mode. lf the High-speed or Low-speed
Program AE mode is desired, set the shutter control dial
t o " H P " o r " L P . "
The "P" is displayed in the viewfinder, indicating the
camera is in the Program AE mode.
o When older Zeiss lenses, not fitted with a program
coupling pin, are used, the "P" will not be displayed.
2
Stop the Lens Down to lts Minimum Aperture
Setting
Turn the lens aperture ring to its minimum setting of "16,"
etched in oreen.
54
E| Focus and ComPose
Focus on subject by turning the focusing ring, and
compose your picture at the same time.