Related Manuals for Schiedel Sirius 3G
Summarization of Contents
IMPORTANT INFORMATION
SAFETY
Covers burn hazards, fire hazards, and precautions for children playing near the hot stove.
Operation and Safety Notes
Emphasizes proper chimney connection, safe use, avoiding flammable substances, and operating with an open door.
Fuel, Installation, and Maintenance
Fuel and Chimney Requirements
Addresses suitable fuel, and ensuring chimneys are suitable and ready for use.
Correct Installation and Servicing
Stresses installation by specialists, and regular cleaning for safety and efficiency.
TRANSPORT / PACKAGING
Modes of Transport
Details acceptable methods for transporting the device, emphasizing load-bearing capacity.
FUEL
Permitted Fuel Types
Specifies firewood as the primary fuel and lists acceptable materials for igniting.
INSTALLATION
Minimum Distances to Combustibles
Specifies required safety distances from heat-sensitive components for safe installation.
Installation Details
Stove Recess and Floor Protection
Covers installation in recesses and requirements for floor protection.
Room-sealed operation
Connection Methods
Describes different ways to connect the stove for combustion air supply.
Changing the supply air feed/exhaust extraction pipe
Tools Required
Lists the necessary tools for making alterations to the air feed/exhaust pipe.
Exhaust pipe from the rear
Steps for Rear Exhaust Connection
Detailed instructions for reconfiguring the device to use an exhaust pipe from the rear.
Supply air feed from the rear
Rear Air Feed Installation Steps
Instructions for connecting the supply air feed from the rear of the stove.
Supply air feed from below
Lower Air Feed Installation Steps
Instructions for connecting the supply air feed from below the stove.
OPERATION
Setting for Combustion Air
Explains how air supply affects combustion efficiency and heat output, stressing the importance of correct settings.
Heat Settings and Controls
Heat Setting "1"
Describes the "1" setting for optimal clean combustion and nominal capacity.
Heat Setting "2"
Explains the "2" setting for igniting, providing maximum air supply.
Air flow to maintain clean glass
Glass Cleaning Procedure
Explains how air flow keeps glass clean and recommends cleaning agents for soot removal.
INITIAL OPERATION
First Time Use and Running In
Instructions for initial inspection, low-heat operation, and varnish curing.
CLEANING AND MAINTENANCE
Burn Hazard Warning
Warning to let the device cool before cleaning to prevent contact with hot components.
How to clean the heating door
Cleaning varnished surfaces
Instructions for cleaning varnished surfaces with a damp cloth, avoiding detergents and excessive water.
Cleaning the window
Cleaning the combustion chamber
Details how to clean the grate, ash holder, and flue gas ducts using specific methods and tools.
CLEAN AIR ACT
Smoke Control Areas
Explains local authority powers regarding smoke control areas and appliance suitability.
TROUBLESHOOTING
Glass Soot and Extraction Issues
Addresses glass soot buildup and poor stove extraction, including causes and solutions.
Smells, Smoke, and Fumes
Explains smells from varnish curing and dust, and how to prevent smoke and fumes escaping.
TECHNICAL DATA
Type Testing and Specifications
Lists certifications and technical specifications for Sirius models.
Need help?
Do you have a question about the Sirius 3G and is the answer not in the manual?
Questions and answers