Related Manuals for Mystery Electronics FC12X
Summary of Contents for Mystery Electronics FC12X
- Page 1 EasyMix Series User Guide Revision 0 DSP Fader Control Surface Model FC8X Model FC12X www.mysteryelectronics.com 800 798 2256 | sales 615 643 8460 | support...
-
Page 2: Table Of Contents
Highest Gain ................................10 Control Toggles ..............................11 DSP Specific Settings ............................. 11 Biamp Tesira ..............................12 QSC Q-Sys ..............................13 Symetrix SymNet .............................. 14 Utilities ..........................14 Update ..........................15 Part 7 Warranty Part 8 Declaration of Conformity © 2020 Mystery Electronics... -
Page 3: Part 1 Introduction
The EasyMix is set to use DHCP by default. The easiest method of locating the EasyMix is to connect it to a LAN that has a DHCP server. If your LAN has a DHCP server enabled: © 2020 Mystery Electronics... -
Page 4: Part 4 Obtaining Support
Open the EasyMix Settings in a web browser by using the actual IP address of the hardware. See the section How to connect to your EasyMix 6.1 Status You can view the current state of the EasyMix on the Status page. © 2020 Mystery Electronics... -
Page 5: Network
DSP. Mac Address Displays the mac address of the EM SNTP Enable SNTP to correctly time stamp the Wireshark captures. The DNS and Gateway must be configured for this to work. © 2020 Mystery Electronics... -
Page 6: Easymix Setup
Configure the Top Row Buttons on this tab. Each button can be assigned a function from the Button column in the table below. Some functions have additional options that can be configured. Button LED color is dependent upon the configured function. Button Function Options Configuration Color © 2020 Mystery Electronics... -
Page 7: Site Setup
DSP configuration file. Choose a DSP from the dropdown list to load the default configuration for that DSP. Save a Site name for your reference. The following controls are available for linking. • Faders • Alternate Faders 1 © 2020 Mystery Electronics... -
Page 8: Faders
DSP Min Gain Set the minimum gain used by the connected level controls in the DSP. Channel Settings Channel number - FC8X=16, FC12X=24 © 2020 Mystery Electronics... -
Page 9: Alternate Faders
Indicator to show status of the connection to the individual DSP control. Enable / Disable the channel. Name Name will be visible in the Advanced menu or and in the upper right of the HD display when the appropriate © 2020 Mystery Electronics... -
Page 10: Alternate Toggles
Name will be visible in the bottom row buttons in the HD display. Channel Settings Channel number - FC8X=16, FC12X=24 Bank Channel bank. The first half of the items are bank A while the second half are bank B. © 2020 Mystery Electronics... -
Page 11: Meters
Type Meter Name Name the indicator. This name will be visible as an text icon on the HD display just below and to the left of the the channel name. Limited to 4 characters. Channel Settings © 2020 Mystery Electronics... -
Page 12: Control Toggles
Settings for information specific to your DSP. Read Only Read only changes the button to an indicator only. Scaling Switch or Meter 6.4.8 DSP Specific Settings This section addresses the specifics for applicable DSP OEM architecture. © 2020 Mystery Electronics... -
Page 13: Biamp Tesira
Enter the Index for the individual control in the processing block. Set the control Rate as desired (seconds). It is recommended that the following control types have a polling rate of 3 seconds or more to reduce load on the DSP. © 2020 Mystery Electronics... -
Page 14: Qsc Q-Sys
DSP. Import the Q-Sys plugin from the asset manager or download from www.mysteryelectronics.com/downloads. Set the plugin port to match the DSP Port used by the EasyMix on the Network page. Typical ports would be 48630 to 48640. © 2020 Mystery Electronics... -
Page 15: Symetrix Symnet
EasyMix will be able to receive feedback from the controls. A Supermodule is available for download from www.mysteryelectronics.com/downloads. 6.5 Utilities Button Pressed Displays the currently pressed button on the EasyMix. Fader Pressed Displays the currently touched fader. © 2020 Mystery Electronics... -
Page 16: Update
For warranty information, please visit: www.mysteryelectronics.com/warranty Declaration of Conformity We, Mystery Electronics Group, LLC, 3439 Pinson School Rd, Springfield, Tenn. 37172, USA, declare under our sole responsibility that the product: EasyMix, to which this declaration relates, is in conformity with the following standards: FCC Part 15, Class B This device complies with part 15, Class B of the FCC Rules.
Need help?
Do you have a question about the FC12X and is the answer not in the manual?
Questions and answers